Sol-gel derived bioactive glass ceramics for dental applications

Author(s):  
X. Chatzistavrou ◽  
E. Kontonasaki ◽  
K.M. Paraskevopoulos ◽  
P. Koidis ◽  
A.R. Boccaccini
2008 ◽  
Vol 396-398 ◽  
pp. 153-156 ◽  
Author(s):  
Xanthippi Chatzistavrou ◽  
E. Hatzistavrou ◽  
Nikolaos Kantiranis ◽  
Lambrini Papadopoulou ◽  
Eleana Kontonasaki ◽  
...  

The aim of this study was the fabrication using a sol-gel technique of a new glass-ceramic with potential use in dental applications. The characterization of the composition and microstructural properties of the produced material confirmed the similarity between the new sol-gel derived glass-ceramic and a commercial leucite based fluorapatite dental glass-ceramic. The produced material has potential application in dental restorations and it is expected to exhibit better control of composition, microstructure and properties due to the intrinsic advantages of the sol-gel preparation method.


Author(s):  
Bui Xuan Vuong

In this paper, three ceramic compositions 50SiO2-50CaO (A), 45SiO2-45CaO-10P2O5 (B) and 40SiO2-40CaO-20P2O5 (C) (wt %) were synthesized by using the sol-gel technique. XRD analysis demonstrates that only sample C can form the glass material. Treated temperatures and heated times were also evaluated. Analysis data showed that the bioglass 40SiO2-40CaO-20P2O5 (wt %) can successfully elaborate when the ceramic powder heated at 750 oC for 3 hours. ‘‘In vitro’’ experiment was effectuated to investigate the bioactivity of bioglass 40SiO2-40CaO-20P2O5 by soaking powder samples in SBF solution. Obtained result confirmed the formation of hydroxyapatite (HA) phase on glass’s surface after 15 days of immersion, in which HA formation orients following (211) and (222) miller planes in crystalline structure of HA phase. Keywords Sol-gel; bioglass; hydroxyapatite; SBF; bioactivity References [1] D.F. Williams, Definitions in Biomaterials, Consensus Conference for the European Society for Biomaterials, Chester, UK, 1986.[2] L.L. Hench, Bioceramics: From Concept to Clinic, Journal of the American Ceramic Society, 74 (1991) 1487.[3] L.L. Hench, The story of Bioglass, Journal of Materials Science: Materials in Medicine, 17 (2006) 967.[4] X.V. Bui, H. Oudadesse, Y. Le Gal, A. Mostafa, P.Pellen and G. Cathelineau, Chemical Reactivity of Biocomposite Glass-Zoledronate, Journal of the Australian Ceramic Society, 46 (2010) 24.[5] L.L. Hench, Genetic design of bioactive glass, Journal of the European Ceramic Society, 29 (2009) 1257.[6] S. Kumar, P. Vinatier, A. Levasseur, K.J. Rao, Investigations of structure and transport in lithium and silver borophosphate glasses, Journal of Solid State Chemistry, 177 (2004)1723.[7] Z. Hong, A. Liu, L. Chen, X. Chen, X. Jing, Preparation of bioactive glass ceramic nanoparticles by combination of sol–gel and coprecipitation method, Journal of Non-Crystalline Solids, 355 (2009) 368.[8] D.B. Joroch, D.C. Clupper, Modulation of zinc release from bioactive sol–gel derived SiO2‐CaO‐ZnO glasses and ceramics, Journal of Biomedical Materials Research Part A, 82A (2007) 575.[9] J. Roman, S. Padilla, M. Vallet-Regi, Sol−Gel Glasses as Precursors of Bioactive Glass Ceramics, Chemistry of Materials, 15 (2003) 798.[10] J. Lao, J.M. Nedelec, Ph. Moretto, E. Jallot, Biological activity of a SiO2-CaO-P2O5 sol-gel glass highlighted by PIXE-RBS methods, Nuclear Instruments and Methods in Physics Research Section B, 245 (2006) 511.[11] [11] M. Vallet-Regi, L. Ruiz-Gonzalez, I. Izquierdo, J.M. Gonzalez-Calbet, Revisiting silica based ordered mesoporous materials: medical applications, Journal of Materials Chemistry, 16 (2006) 26.[12] W. Xia, J. Chang, Preparation and characterization of nano-bioactive-glasses (NBG) by a quick alkali-mediated sol–gel method, Materials Letters 61 (2007) 3251.[13] R. Li, A.E. Clark, L.L. Hench, An investigation of Bioactive Glass Powders by Sol-Gel Processing, Transactions of 16th Annual Meeting of the Societey for Biomaterials, 12 (1990) 40.[14] J. Lao, J.M. Nedelec, P. Moretto, E. Jallot, Imaging physicochemical reactions occurring at the pore surface in binary bioactive glass foams by micro ion beam analysis, Applied Materials and Interfaces, 6 (2010) 1737.[15] A. Balamurugan, G. Balossier, S. Kannan, J. Michel, A.H.S. Rebelo, J.M.F. Ferreira, Development and in vitro characterization of sol–gel derived CaO–P2O5–SiO2–ZnO bioglas, Acta Biomaterialia, 3 (2007) 255.[16] Z. Hong, A. Liu, L. Chen, X. Chen, X. Jing, Bioactive glass prepared by sol–gel emulsion, Journal of Non-Crystalline Solids, 355 (2009) 368.[17] O. Peital, E.D. Zanotto, L.L. Hench, Highly bioactive P2O5-Na2O-CaO-SiO2 glass-ceramics, Journal of Non-Crystalline Solids, 292 (2001) 115.[18] J. Liu, X. Miao, Sol-gel derived bioglass as a coating material for porous alumina scaffolds, Ceramics International, 30 (2004) 1781.[19] T. Kokubo, H. Takadama, How useful is SBF in predicting in vivo bone bioactivity. Biomaterials 27 (2006) 2907.[20] M. Dziadek, B. Zagrajczuk, P. Jelen, Z. Olejniczak, K.C. Kowalska, Structural variations of bioactive glasses obtained by different synthesis routes, Ceramics International, 42 (2016) 14700.[21] R. Lakshmi, V. Velmurugan and S. Sasikumar, Preparation and Phase Evolution of Wollastonite by Sol-Gel Combustion Method Using Sucrose as the Fuel, Combustion Science and Technology, 185 (2013) 1777.[22] G. Voicu, A. Bădănoiu, E. Andronescu1, C. M. Chifiruc, Synthesis, characterization and bioevaluation of partially stabilized cements for medical applications, Central European Journal of Chemistry, 11 (2013) 1657.[23] M.V. Regi, Ceramics for medical applications, Journal of the Chemical Society, Dalton Transactions, 2 (2001) 97.[24] G. Voicu, A.I. Bădănoiu, E. Andronescu, C.M. Chifiruc, Synthesis, characterization and bioevaluation of partially stabilized cements for medical applications, Central European Journal of Chemistry, 11 (2013) 1657.M. Wu, T. Wang, Y. Wang, F. Li, M. Zhou, X. Wu, A novel and facile route for synthesis of fine tricalcium silicate powders, Materials letters, 227 (2018), 187.


Author(s):  
Roger Borges ◽  
Leticie Mendonça-Ferreira ◽  
Carlos Rettori ◽  
Isis S.O. Pereira ◽  
Francesco Baino ◽  
...  

2020 ◽  
Author(s):  
Reedwan Bin Zafar Auniq ◽  
Namon Hirun ◽  
Upsorn Boonyang

Bioactive glass ceramics (BGCs) have been used in orthopedic and dentistry due to having better osteoconductive and osteostimulative properties. This study aimed to evaluate and compare the drug release properties of two different BGCs; 45S5 and S53P4. The BGCs were composed with four phases of SiO2 – CaO – Na2O – P2O5 system, synthesized by sol–gel method using dual templates; a block-copolymer as mesoporous templates and polymer colloidal crystals as macroporous templates, called three-dimensionally ordered macroporous-mesoporous bioactive glass ceramics (3DOM-MBGCs). In vitro bioactivity test performed by soaking the 3DOM-MBGCs in simulated body fluid (SBF) at 37°C. The results indicated that, the 45S5 have the ability to grow hydroxyapatite-like layer on the surfaces faster than S53P4. Gentamicin drug was used to examine in vitro drug release properties in phosphate buffer solution (PBS). The amount of drug release was quantified through UV/Vis spectroscopy by using o-phthaldialdehyde reagent. S53P4 showed high drug loading content. The outcome of drug release in PBS showed that both S53P4 and 45S5 exhibited a slowly continuous gentamicin release. The resultant drug release profiles were fitted to the Peppas-Korsmeyer model to establish the predominant drug release mechanisms, which revealed that the kinetics of drug release from the glasses mostly dominated by Fickian diffusion mechanism.


2011 ◽  
Vol 493-494 ◽  
pp. 637-642 ◽  
Author(s):  
Xanthippi Chatzistavrou ◽  
Konstantinos M. Paraskevopoulos ◽  
Vehid Salih ◽  
Aldo Roberto Boccaccini ◽  
Toshihiro Kasuga

The aim of this work was to improve a newly developed family of glass-ceramic composite materials by incorporating silver ions in the ceramic structure, thus developing new Ag-doped materials with the ability of showing antibacterial activity for dental applications. Two different sol-gel methodologies were applied for the fabrication of colorless, homogenous and chemically durable materials which can slowly release silver ion for relatively long periods. Both methods led to the successful development of Ag-doped glass-ceramics with silver ions incorporated in the structure that can slowly release in buffer solution, during a period of 45 days. The potential, application of these materials involve the development of bioactive surfaces on dental substrates which can seal the marginal gap creating a bacterial free environment finally supporting the success of dental restorations.


2010 ◽  
Vol 6 (10) ◽  
pp. 4143-4153 ◽  
Author(s):  
Qi-Zhi Chen ◽  
Yuan Li ◽  
Li-Yu Jin ◽  
Julian M.W. Quinn ◽  
Paul A. Komesaroff

2013 ◽  
Vol 19 (2) ◽  
pp. 231-239 ◽  
Author(s):  
Nima Nabian ◽  
Maedeh Delavar ◽  
Mahmood Rabiee ◽  
Mohsen Jahanshahi

The paper reports the first attempt at changing cooling treatment of synthesizing method in order to investigate its effect on the physical properties of sol-gel derived nano bioactive glass-ceramic in the system 58SiO2-33CaO-9P2O5 (wt.%). We hypothesized that the method of cooling may affect the properties of nano bioactive glass-ceramic. To test this hypothesis, two different method of cooling treatment was applied after calcinations in synthesizing method. Both quenched and unquenched nano bioactive glass-ceramics were soaked in Ringer?s solution with bovine serum albumin (BSA) for bioactivity evaluation. The obtained samples were analyzed for their composition, crystalinity and morphology through X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), surface electron microscope (SEM) and transmission electron microscope (TEM). The SEM images showed that the morphology of nano bioactive glass-ceramics was completely changed by quenching process. Results of in vitro bioactivity evaluation revealed that the unquenched attains faster apatite formation ability than the quenched sample. Other properties of these two morphologically different nano bioactive glass-ceramics were strongly discussed.


2006 ◽  
Vol 49 ◽  
pp. 103-108
Author(s):  
R. Sindut ◽  
Katarzyna Cholewa-Kowalska ◽  
Maria Łączka

Bioglasses and bioactive glass-ceramics have found increasingly wide application in medicine and dentistry. Using sol-gel method, is possible to obtain glass and glass-ceramic bioactive materials of new generation, characterized the higher bioactivity than melted bioglasses. These materials can be produced in various final forms, as powders, thin layers on different base and porous sinters. Production of porous bioactive sinters from gel-derived powders is a new problem and the parameters controlling this process are not recognized yet. The aim of the study was to obtain porous bioactive sinters from gel-derived powders of the SiO2-CaO-P2O5 system of four various chemical compositions (S2, II, I, A2) and the characterization of properties of these new materials. The starting powders differ from each other in the content of the basic components, at the molar ratio of CaO to SiO2 equals 0.2-1.35. To obtain the porous sinters a method of burning additions and deposition of the casting slip on the polymeric sponge was used. Sintering was realized in several stages, at the maximal temperature 1200oC. By selecting appropriate conditions of sintering, a durable material of high open porosity up to 77 % was obtained. Its porous structure was characterized by a prevailing number of small micropores of similar dimensions, uniformly distributed in the material. The phase composition of obtained sinters was determined by the X-ray diffraction method. All sinters represented glass-ceramic materials with apatite, cristoballite and calcium silicates as a main crystalline phases. In order to preliminary determination bioactivity of obtained sinters, test in vitro in simulated body fluid SBF was conducted. It was found that hydroxyapatite formation on the sinter surface occurs only in the case of biomaterials of highest calcium concentration.


2010 ◽  
Vol 30 (5) ◽  
pp. 730-739 ◽  
Author(s):  
X. Chatzistavrou ◽  
D. Esteve ◽  
E. Hatzistavrou ◽  
E. Kontonasaki ◽  
K.M. Paraskevopoulos ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document