scholarly journals Steady state stability in electrical power systems considering operation limits in generators, transformers and transmission lines

2021 ◽  
Vol 18 (2) ◽  
Author(s):  
Fredy Estuardo Tamayo Guzmán ◽  
Carlos Andrés Barrera-Singaña
Keyword(s):  
Steady State ◽  
Power Systems ◽  
Power System ◽  
Transmission Lines ◽  
Electrical Power ◽  
Operating Conditions ◽  
Electrical Power Systems ◽  
Capacity Curves ◽  
Remedial Actions ◽  
Steady State Stability

Electrical power systems are exposed to several events that can cause unstable operation scenarios. This is due to improper operation of certain components. If an event occurs, the system must be designed to overcome that contingency, thus remaining in a permanent condition that must be evaluated in order to monitor and prevent a possible collapse of the system. An evaluation of steady state stability is proposed at this work based on the capacity curves of generators, transformers and transmission lines. These remarked curves provide information on the operation point of these elements, thus allowing the application of remedial actions. PowerFactory and Matlab are used to carry out the tool for monitoring the operation points after a contingency. The effectiveness of the developed tool is validated at the IEEE 39-bus power system model, where results shows that the functionalaty for different contingencies based on the operating conditions when the components of the power system are varied, cosnquently, the tool identifies cases that require actions at the operational level.

scholarly journals Review of Steady-State Electric Power Distribution System Datasets

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4826
Author(s):  
Steffen Meinecke ◽  
Leon Thurner ◽  
Martin Braun
Keyword(s):  
Steady State ◽  
Power Systems ◽  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
New Technologies ◽  
Electrical Power ◽  
Background Information ◽  
Electrical Power Systems ◽  
Power Distribution System

Publicly available grid datasets with electric steady-state equivalent circuit models are crucial for the development and comparison of a variety of power system simulation tools and algorithms. Such algorithms are essential to analyze and improve the integration of distributed energy resources (DERs) in electrical power systems. Increased penetration of DERs, new technologies, and changing regulatory frameworks require the continuous development of the grid infrastructure. As a result, the number and versatility of grid datasets, which are required in power system research, increases. Furthermore, the used grids are created by different methods and intentions. This paper gives orientation within these developments: First, a concise overview of well-known, publicly available grid datasets is provided. Second, background information on the compilation of the grid datasets, including different methods, intentions and data origins, is reviewed and characterized. Third, common terms to describe electric steady-state distribution grids, such as representative grid or benchmark grid, are assembled and reviewed. Recommendations for the use of these grid terms are made.

Gramians Method of Steady-State Stability Analysis for Large Electrical Power Systems

2012 ◽  
Vol 45 (21) ◽  
pp. 466-471 ◽  
Author(s):  
Atlas V. Ahmetzyanov ◽  
Alexey B. Iskakov ◽  
Alex A. Grigoryev ◽  
Alexander M. Matinyan ◽  
Igor B. Yadykin ◽  
...  
Keyword(s):  
Steady State ◽  
Stability Analysis ◽  
Power Systems ◽  
Electrical Power ◽  
Electrical Power Systems ◽  
Steady State Stability

Virtual Stability Estimator Model for Three Phase Power System Network

2016 ◽  
Vol 4 (3) ◽  
pp. 520 ◽  
Author(s):  
K. Nithiyananthan ◽  
Simson Samson Raja ◽  
R Sundar ◽  
A Amudha
Keyword(s):  
Power Systems ◽  
Power System ◽  
Virtual Instrument ◽  
Electrical Power ◽  
Research Work ◽  
Electrical Power Systems ◽  
Proposed Model ◽  
Three Phase ◽  
User Friendly ◽  
Steady State Stability

<p><em>The main objective of this research work is to develop a simple power systems steady state stability estimator in LabView for three phase power system network. LabVIEW based power systems stability estimator has been chosen as the main platform because it is a user friendly and easy to apply in power systems. This research work is intended to simultaneously acclimate the power system engineers with the utilization of LabVIEW with electrical power systems. This proposed work will discuss about the configuration and the improvement of the intelligent instructional VI (virtual instrument) modules in power systems for power systems stability solutions. In the proposed model power systems stability has been carried out and model has been developed such that it can accommodate the latest versions of power systems stability algorithms.</em></p>

scholarly journals Wind integrated power system to reduce emission: An application of Bat algorithm

2021 ◽  
pp. 1-9 ◽  
Author(s):  
B. Venkateswara Rao ◽  
Ramesh Devarapalli ◽  
H. Malik ◽  
Sravana Kumar Bali ◽  
Fausto Pedro García Márquez ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Power Plants ◽  
Optimal Parameter ◽  
Electrical Power ◽  
Bat Algorithm ◽  
Voltage Profile ◽  
Electrical Power Systems ◽  
Generation Cost ◽  
Automation Technology

The trend of increasing demand creates a gap between generation and load in the field of electrical power systems. This is one of the significant problems for the science, where it require to add new generating units or use of novel automation technology for the better utilization of the existing generating units. The automation technology highly recommends the use of speedy and effective algorithms in optimal parameter adjustment for the system components. So newly developed nature inspired Bat Algorithm (BA) applied to discover the control parameters. In this scenario, this paper considers the minimization of real power generation cost with emission as an objective. Further, to improve the power system performance and reduction in the emission, two of the thermal plants were replaced with wind power plants. In addition, to boost the voltage profile, Static VAR Compensator (SVC) has been integrated. The proposed case study, i.e., considering wind plant and SVC with BA, is applied on the IEEE30 bus system. Due to the incorporation of wind plants into the system, the emission output is reduced, and with the application of SVC voltage profile improved.

scholarly journals REDUCING THE LIKELIHOOD OF ELECTRICAL POWER-RELATED DISASTERS: A FUZZY MCDM APPROACH

2018 ◽  
Vol 9 (1) ◽  
pp. 679-686
Author(s):  
Eko Setiawan ◽  
Septin Puji Astuti ◽  
Handoko Handoko
Keyword(s):  
Power Systems ◽  
Power System ◽  
Selection Process ◽  
Human Life ◽  
Electrical Power ◽  
Electrical Power System ◽  
Electrical Power Systems ◽  
Analytic Hierarchy ◽  
Electricity Power ◽  
Negative Impacts

Many of disasters are related to electrical power systems. They affect human life and economy. In order to reduce the negative impacts caused by the failure of electricity power system due to disasters and to create a robust electrical power system, selecting the best relay of electricity power is a must. This study identified the best protective relay of electrical power systems of PLN in Surakarta region by applying analytic hierarchy process (AHP), one of MCDM approaches, combined with fuzzy logic. Extent analysis approach was implemented to derive priorities of various criteria, sub-criteria and alternatives. Three relays being considered in the selection process are electromagnetic relay, digital relay and static relay. Four criteria in this study are techno-economy, fault frequency, protection of transmission line and advantage of relay over others. Meanwhile, five sub-criteria for each criterion are reliability, selectivity, sensitivity, working speed and efficient. Based on the criteria and sub-criteria, it can be inferred that in terms of four working areas of PLN management in Surakarta region, digital relay is seen as the best choice of relays.

Harmonic Solutions To Commercial And Industrial Electrical Power Systems

2015 ◽  
Vol 6 (1) ◽  
Author(s):  
Amarjeet Singh
Keyword(s):  
Power Systems ◽  
Power System ◽  
System Reliability ◽  
Electrical Power ◽  
Harmonic Distortion ◽  
System Capacity ◽  
Electrical Power System ◽  
Electrical Power Systems

Problems associated with harmonic distortion are well understood for electrical power system applications.The right solution is challenging. There are numerous technologies to choose from, each with specific technical and economic advantages. This paper provides recommendations for reducing harmonic distortion, improving system capacity and improving system reliability. Special considerations for applying capacitors on a power systems with harmonics will be discussed.

scholarly journals Comparative performance analysis of hybrid differential evolution and pattern search technique for frequency control of the electric power system

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Pratap Chandra Pradhan ◽  
Rabindra Kumar Sahu ◽  
Sidhartha Panda
Keyword(s):  
Genetic Algorithm ◽  
Power Systems ◽  
Power System ◽  
Differential Evolution ◽  
Frequency Control ◽  
Electrical Power ◽  
Pattern Search ◽  
Thermal System ◽  
Electrical Power Systems ◽  
Suggested Approach

AbstractIn the current situation, operation and control of power system is a greater challenge. The most significant situation in power system control is load frequency control. In the present work, a hybrid differential evolution and pattern search (hDE-PS) method has been suggested for frequency regulation of electrical power systems. Fractional-order proportional integral derivative (FOPID) controller is implemented for design and analysis purpose. The suggested control method has been applied for two electrical power systems model, i.e., 2-area diverse source power system with/without HVDC linkage and 2-area thermal system. The performances of the suggested controller have been evaluated with PID and optimal controller. The simulation results indicate that system performances are enhanced with the suggested approach for identical structure. Robustness of the suggested approach has been analyzed by variation in random load and the system parameters. The suggested method (hDE-PS tuned FOPID) is further investigated with a 2-area thermal system. The performance of the recommended approach is analyzed by equating the results with other newly available approaches, like Genetic Algorithm (GA), Bacteria Foraging Optimization Algorithm (BFOA), Particle Swarm Optimization (PSO), hybrid BFOA and PSO (hBFOA-PSO), multi-objective Non-dominated Sorting Genetic Algorithm (NSGA)-II and Firefly Algorithm for the similar structure.

Sign in / Sign up

Export Citation Format

Share Document