Measurement of Diffusion Coefficients by Observing Mixing of Two Liquids Simultaneously Injected in a Micro-Mixer

2018 ◽  
Vol 138 (5) ◽  
pp. 173-179 ◽  
Author(s):  
Toshiyuki Horiuchi ◽  
Yuta Morizane
Keyword(s):  
Diffusion Coefficients ◽  
Micro Mixer

Interlayer mixing in GaAs/AlxGa1-xAs heterostructures as a result of Se+ ion implantation

1988 ◽  
Vol 46 ◽  
pp. 908-909
Author(s):  
E.G. Bithell ◽  
W.M. Stobbs
Keyword(s):  
Ion Implantation ◽  
Diffusion Coefficients ◽  
Dark Field ◽  
Atomic Mass ◽  
Composition Profile ◽  
Semiconductor Heterostructures ◽  
Transmission Electron ◽  
Microscope Images ◽  
Damage Process ◽  
Electron Energy Loss

It is well known that the microstructural consequences of the ion implantation of semiconductor heterostructures can be severe: amorphisation of the damaged region is possible, and layer intermixing can result both from the original damage process and from the enhancement of the diffusion coefficients for the constituents of the original composition profile. A very large number of variables are involved (the atomic mass of the target, the mass and energy of the implant species, the flux and the total dose, the substrate temperature etc.) so that experimental data are needed despite the existence of relatively well developed models for the implantation process. A major difficulty is that conventional techniques (e.g. electron energy loss spectroscopy) have inadequate resolution for the quantification of any changes in the composition profile of fine scale multilayers. However we have demonstrated that the measurement of 002 dark field intensities in transmission electron microscope images of GaAs / AlxGa1_xAs heterostructures can allow the measurement of the local Al / Ga ratio.

The Calculation of Turbulent Diffusion Coefficients in Aquatic Ecosystems

2019 ◽  
Vol 70 (11) ◽  
pp. 3903-3907
Author(s):  
Galina Marusic ◽  
Valeriu Panaitescu
Keyword(s):  
Transport Equation ◽  
Turbulent Diffusion ◽  
Diffusion Coefficients ◽  
Aquatic Ecosystems ◽  
Specific Area ◽  
Left Bank ◽  
The Right ◽  
Prut River

The paper deals with the issues related to the pollution of aquatic ecosystems. The influence of turbulence on the transport and dispersion of pollutants in the mentioned systems, as well as the calculation of the turbulent diffusion coefficients are studied. A case study on the determination of turbulent diffusion coefficients for some sectors of the Prut River is presented. A new method is proposed for the determination of the turbulent diffusion coefficients in the pollutant transport equation for specific sectors of a river, according to the associated number of P�clet, calculated for each specific area: the left bank, the right bank and the middle of the river.

The diffusion coefficients 110mAg isotope in copper-contained chalcogenide films obtained by chemical deposition

2016 ◽  
Author(s):  
Д.Л. Байдаков
Keyword(s):  
Diffusion Coefficients ◽  
Chalcogenide Glasses ◽  
Film Formation ◽  
Polymer Network ◽  
Chemical Deposition ◽  
Film Deposition ◽  
Constant Current ◽  
Residual Pressure ◽  
Quartz Ampoule ◽  
Chalcogenide Films

Методом химического нанесения из растворов халькогенидных стекол в н-бутиламине получены многокомпонентные халькогенидные пленки CuI-As2Se3, CuI-PbI2-As2Se3, CuI-SbI3-As2Se3, CuI-SbI3-PbI2-As2Se3. Синтез многокомпонентных медьсодержащих халькогенидных стекол, использовавшихся для нанесения пленок, проводили методом вакуумной плавки в кварцевых ампулах при температуре 400…950 °С и остаточном давлении не более 0,13 Па. Закалку стекол производили от 600 °С в воду со льдом с разливом расплава в ампуле. Навеску стекла размельчали в порошок и кипятили в н-бутиламине до полного растворения. Для предотвращения процессов окисления, нанесение и отжиг пленок проводили в атмосфере химически инертного азота. Подложку помещали на устройство для вращения, наносили на нее раствор и вращали подложку со скоростью несколько тысяч оборотов в минуту. Отжиг пленок проводили при температуре 100 °С в течение 1 ч. Измерение электропроводности полученных пленок проводили на постоянном и переменном токе в зависимости от значений электропроводности в температурном интервале 20…100 °С. Измерение коэффициентов диффузии проводили абсорбционным методом. Из диффузионных экспериментов определены значения коэффициентов диффузии катионов изотопа 110mAg в медьсодержащих халькогенидных пленках. Установлено, что значения коэффициентов диффузии ионов Ag+ в химически нанесенных пленках и исходных стеклах практически не различаются. Аналогию значений коэффициентов диффузии изотопа 110mAg в халькогенидных стеклах и пленках на их основе можно объяснить сохранением полимерной сетки связей халькогенидных стекол при их растворении в органических основаниях (аминах). В процессе нанесения и формирования пленок полимерная (макромолекулярная) структура раствора халькогенидных стекол сохраняется. The method of chemical deposition from solutions of chalcogenide glasses in n-butyl amine obtained multicomponent chalcogenide films CuI-As2Se3, CuI-PbI2-As2Se3, CuI-SbI3-As2Se3, CuI-SbI3-PbI2-As2Se3. Synthesis of copper multicomponent chalcogenide glasses, used for film deposition was carried out by vacuum melting in quartz ampoule at a temperature of 400…950 °C and a residual pressure of not more than 0.13 Pa. The temperature of glass produced from the 600 °C to the ice water spill of the melt in the ampoule. Weigh glass comminuted to a powder and heated in n-butylamine until complete dissolution. To prevent oxidation, deposition and annealing of the films was carried out in an atmosphere of nitrogen chemically inert. The substrate is placed on a device for rotating, it was applied to the solution and the substrate was rotated at a speed of several thousand revolutions per minute. Annealing of the films was carried out at 100 °C for 1 hour. Measurement of the electrical conductivity of the obtained films was conducted at a constant current and variable depending on the conductivity values ​​in the temperature range from 20 to 100 °C. Measurement of diffusion coefficients was performed according to the absorption method. From diffusion experiments, the values ​​of the diffusion coefficients 110mAg isotope cations in copper chalcogenide films. It was found that the values ​​of the diffusion coefficients of the ions Ag+ in a chemically deposited films and the original glasses are indistinguishable. The analogy of the diffusion coefficient values ​​110mAg isotope in chalcogenide glasses and films based on them can be attributed to the preservation of the polymer network connections chalcogenide glasses when dissolved in organic bases (amines). During application and film formation the polymer (macromolecular) structure of chalcogenide glasses of the solution is maintained.

Sign in / Sign up

Export Citation Format

Share Document