Regenerative Operation of a Diode-Clamped Linear Amplifier and Its Application as an Electronic Load

2011 ◽  
Vol 131 (4) ◽  
pp. 633-639 ◽  
Author(s):  
Naoya Yamashita ◽  
Hideaki Fujita
Keyword(s):  
Linear Amplifier ◽  
Electronic Load

Classification and Identification of Power System Disturbances Using Wavalet and Artificial Neural Network Technique

2005 ◽  
Vol 2 (2) ◽  
pp. 25
Author(s):  
Noraliza Hamzah ◽  
Wan Nor Ainin Wan Abdullah ◽  
Pauziah Mohd Arsad
Keyword(s):  
Neural Network ◽  
Power Quality ◽  
Probabilistic Neural Network ◽  
Microsoft Excel ◽  
Waveform Data ◽  
The Neural Network ◽  
Harmonic Voltage ◽  
Power Quality Disturbances ◽  
Electronic Load ◽  
Wavelet Technique

Power Quality disturbances problems have gained widespread interest worldwide due to the proliferation of power electronic load such as adjustable speed drives, computer, industrial drives, communication and medical equipments. This paper presents a technique based on wavelet and probabilistic neural network to detect and classify power quality disturbances, which are harmonic, voltage sag, swell and oscillatory transient. The power quality disturbances are obtained from the waveform data collected from premises, which include the UiTM Sarawak, Faculty of Science Computer in Shah Alam, Jati College, Menara UiTM, PP Seksyen 18 and Putra LRT. Reliable Power Meter is used for data monitoring and the data is further processed using the Microsoft Excel software. From the processed data, power quality disturbances are detected using the wavelet technique. After the disturbances being detected, it is then classified using the Probabilistic Neural Network. Sixty data has been chosen for the training of the Probabilistic Neural Network and ten data has been used for the testing of the neural network. The results are further interfaced using matlab script code.  Results from the research have been very promising which proved that the wavelet technique and Probabilistic Neural Network is capable to be used for power quality disturbances detection and classification.

scholarly journals Effect of Symmetrically Switched Rectifier Topologies on the Frequency Regulation of Standalone Micro-Hydro Power Plants

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3201
Author(s):  
Henry Bory ◽  
Jose L. Martin ◽  
Iñigo Martinez de Alegria ◽  
Luis Vazquez
Keyword(s):  
Power Factor ◽  
Power Plants ◽  
Reactive Power ◽  
Alternating Current ◽  
Frequency Regulation ◽  
Hydro Power ◽  
Major Energy Source ◽  
Hydro Power Plants ◽  
Electronic Load ◽  
Ac Converters

Micro-hydro power plants (μHPPs) are a major energy source in grid-isolated zones because they do not require reservoirs and dams to be built. μHPPs operate in a standalone mode, but a continuously varying load generates voltage unbalances and frequency fluctuations which can cause long-term damage to plant components. One method of frequency regulation is the use of alternating current-alternating current (AC-AC) converters as an electronic load controller (ELC). The disadvantage of AC-AC converters is reactive power consumption with the associated decrease in both the power factor and the capacity of the alternator to deliver current. To avoid this disadvantage, we proposed two rectifier topologies combined with symmetrical switching. However, the performance of the frequency regulation loop with each topology remains unknown. Therefore, the objective of this work was to evaluate the performance of the frequency regulation loop when each topology, with a symmetrical switching form, was inserted. A MATLAB® model was implemented to simulate the frequency loop. The results from a μHPP case study in a small Cuban rural community called ‘Los Gallegos’ showed that the performance of the frequency regulation loop using the proposed topologies satisfied the standard frequency regulation and increased both the power factor and current delivery capabilities of the alternator.

Compact Drive Electronics for Solid-State Actuators

2000 ◽  
Author(s):  
Jeffrey S. N. Paine ◽  
David S. Bennett ◽  
Carlos E. Cuadros
Keyword(s):  
Solid State ◽  
Power Electronics ◽  
Piezoelectric Material ◽  
Piezoelectric Actuator ◽  
Power Dissipation ◽  
Piezoelectric Materials ◽  
Piezoelectric Actuators ◽  
Linear Amplifier ◽  
Overall Efficiency ◽  
Electronics Packages

Abstract As piezoelectric actuators are developed for high strokes and/or high force applications, the amount of piezoelectric material used in the actuator must also increase. Reducing the size of drive electronics becomes difficult using traditional linear power electronics packages when applications require as much as 40 μF of piezoelectric load. In order to efficiently drive piezoelectric actuator systems, bi-directional systems (drivers that recover the energy put into the piezoelectric capacitor) must be used. Since less than 10% of the power going into the piezoelectric actuator is real versus the large reactive load used to power the piezoelectric materials, bidirectional systems have a much higher efficiency. A comparison is made between traditional linear and PWM amplifier systems and tailored piezoelectric bi-directional driver systems. Bi-directional systems have power dissipation levels up to 1/8th those of traditional linear amplifier systems. In the course of the research both linear and PWM concepts were investigated. A rationale for comparing the overall efficiency of drive electronics systems is presented. Some innovative efficient concepts for piezoelectric system drivers are presented and discussed.

Sign in / Sign up

Export Citation Format

Share Document