Efficient Thermal Cooling Structure for a Motor

2016 ◽  
Vol 136 (6) ◽  
pp. 385-391 ◽  
Author(s):  
Tuyoshi Nonaka ◽  
Shogo Makino ◽  
Motomichi Ohto
Keyword(s):  
2020 ◽  
Vol 26 (1) ◽  
pp. 37-41
Author(s):  
Enggal Nurisman ◽  
Zulfa Syafira ◽  
Fatina Shania

Setiap industri petrokimia memerlukan kebutuhan steam dan air sebagai unit penunjang prosesnya. Untuk meningkatkan efisiensi penggunaan air dalam sistem utilitas diperlukan cooling tower sehingga air pendingin dapat digunakan kembali  selama proses berlangsung. Penggunaan cooling tower dalam industri dinilai penting, sehingga perlu peninjauan mengenai evaluasi kinerja cooling tower. Evaluasi kinerja cooling tower dilakukan berdasarkan perhitungan  jumlah losses, neraca massa dan neraca panas, efisiensi termal, serta efisiensi kerja untuk mengetahui kondisi dan kinerja dari cooling tower dalam proses pendinginan. Hal ini dapat menjadi pertimbangan teknis  pihak industri untuk operasional maupun perawatan lebih lanjut. Setelah melalui pengamatan di lapangan, diperoleh hasil perhitungan aktual yang menunjukkan efisiensi thermal cooling tower pada unit amoniak dan urea berkisar antara 74%-78,70%. dan masih sesuai dengan  efisiensi termal secara desain  sebesar 74 % dan 75,82 %. Sedangkan efisiensi kerja cooling tower unit amoniak maupun unit urea berdasarkan data aktualnya, yaitu berkisar 71,429%-83,537% dan sesuai dengan data desainnya yaitu 71,4 %. Berdasarkan hasil perhitungan tersebut, kinerja cooling tower masih beroperasi dengan baik dan masih layak digunakan dalam proses industri


Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1122
Author(s):  
Irina Varvara Balkan ◽  
Iulian Riposan

Electrically melted and over-heated (>1500 °C) grey cast iron at less than 0.04%S, as commonly used, solidifies large amounts of carbides and/or undercooled graphite, especially in thin wall castings; this is necessary to achieve a stronger inoculation. The efficiency of Ce-bearing FeSi alloy is tested for lower ladle addition rates (0.15 and 0.25 wt.%), compared to the base and conventional inoculated iron (Ba,Ca-bearing FeSi alloy). The present work explores chill and associated structures in hypoeutectic grey iron (3.6–3.8%CE, 0.02%S, (%Mn) × (%S) = 0.013–0.016, Alres < 0.002%), in wedge castings W1, W2 and W3 (ASTM A 367, furan resin sand mould), at a lower cooling modulus (1.1–3.5 mm) that is typically used to control the quality of thin wall iron castings. Relatively clear and total chill well correlated with the standard thermal (cooling curve) analysis parameters and structural characteristics in wedge castings, at different wall thickness, displayed as the carbides/graphite ratio and presence of undercooled graphite morphologies. The difference in effects of the two inoculants addition is seen as the ability to decrease the amount of carbides and undercooled graphite, with Ce-bearing FeSi alloy outperforming the conventional inoculant, especially as the wall thickness decreased. It appears that Ce-bearing FeSi alloy could be a solution for low sulphur, electric melt, thin wall iron castings production.


2021 ◽  
Vol 410 ◽  
pp. 227-234
Author(s):  
Albert R. Khalikov ◽  
Sergey V. Dmitriev

An algorithm is proposed for constructing curves of thermal cooling and ordering kinetics with a monotonic decrease in temperature for alloys to stoichiometric composition. Modeling is carried out by the Monte Carlo method in the model of a rigid crystal lattice and pair interatomic interactions. The application of the algorithm is illustrated by the example to a square lattice, taking into account interatomic interactions in the first two coordination spheres for alloys with the composition AB, A3B, and A3B5. The proposed model makes it possible to calculate individual sections of the phase diagrams to the state for binary alloys.


2020 ◽  
Vol 62 (12) ◽  
pp. 1192-1198
Author(s):  
Ali Kaya Gur ◽  
Semih Taskaya ◽  
Subramaniam Shankar ◽  
Thangamuthu Mohanraj

Abstract Ramor 500 steel plates are used as a ballistic material due to their greater hardness and strength properties. This steel can be produced with a 2-30 mm thickness sheet which may attain 505-590 HV hardness. In the present work, Ramor 500 steel pairs are joined using a submerged arc welding (SAW) process and taking various parameters into consideration. An austenitic additional wire is used for the welding process which contains Cr, Ni, and Mn. The source model prototype was developed using ANSYS software and considering a time-dependent three dimensional thermal model with source cooling. The highest tensile stress voltage value was determined in the sample applying a constant current of 250 A, 25 V and 30 cm × min-1welding speed. It was observed that the welding seam width increases as welding tension grows and that welding height and depth increase and decrease more or less in tandem. A ANSYS thermal cooling analysis revealed that welding tension grows with heat transfer which increases 15 mm from the main center of the welding area.


2010 ◽  
Author(s):  
Dr. Thomas G. Hughes ◽  
Dr. Thomas F. Lin
Keyword(s):  

2019 ◽  
Vol 10 (2) ◽  
pp. 375-404 ◽  
Author(s):  
N. G. Murzintsev ◽  
I. Yu. Annikova ◽  
A. V. Travin ◽  
A. G. Vladimirov ◽  
B. A. Dyachkov ◽  
...  

The article presents an event correlation of the Permian‐Triassic granites of the Altai collision system, which are associated with industrial ore deposits and occurrences (Mo‐W, Sn‐W, Li‐Ta‐Be). The multi‐system and multi‐mineral isotope datings of igneous rocks and ore bodies (U/Pb, Re/Os, Rb/Sr, Ar/Ar‐methods) suggest the postcollisional (intraplate) formation of ore‐magmatic systems (OMS), the duration of which depended on the crustmantle interaction and the rates of tectonic exposure of geoblocks to the upper crustal levels.Two cases of the OMS thermal history are described: (1) Kalguty Mo‐W deposit associated with rare‐metal granite‐leucogranites and ongonite‐ elvan dykes, and (2) Novo‐Akhmirov Li‐Ta deposit represented by topaz‐zinnwaldite granites and the contemporary lamprophyre and ongonit‐elvan dykes. For these geological objects, numerical modeling was carried out. The proposed models show thermal cooling of the deep magmatic chambers of granite composition, resulting in the residual foci of rare‐metal‐granite melts, which are known as the petrological indicators of industrial ore deposits (Mo‐W, Sn‐W, Li‐Ta‐Be). According to the simulation results concerning the framework of a closed magmatic system with a complex multistage development history, the magmatic chamber has a lower underlying observable massif and a reservoir associated with it. A long‐term magmatic differentiation of the parental melt (a source of rare‐metal‐granite melts and ore hydrothermal fluids) takes place in this reservoir.


1979 ◽  
Vol 16 (3) ◽  
pp. 505-522 ◽  
Author(s):  
C. E. Keen

The subsidence histories of the Labrador and Nova Scotian rifted continental margins have been determined from biostratigraphic data for 11 deep exploratory wells off Nova Scotia, for five wells off Labrador, for three wells northeast of Newfoundland, and for one well off the northeast coast of the United States of America. The components of subsidence, due to sediment loading, and when possible due to loading by changes in eustatic sea level, were removed, leaving that part of the subsidence, the tectonic subsidence, caused by cooling of the lithosphere or by other deep seated processes. The thermal cooling model theoretically predicts a linear relationship between tectonic subsidence and t½, where t is the time since subsidence began. This relationship should be obeyed during the first tens of Ma of subsidence. The slope of this curve depends upon the temperature to which the crust and upper mantle were heated during the initial rifting stage and can be used to derive the temperature–time history within the sediments, the present temperature distribution, and geothermal gradient. The data show that the observed subsidence curves behave in accordance with the thermal cooling model, at least during the first 80 Ma after subsidence began and obey the equation y = 300(± 80)t1/2 m, where y is the tectonic subsidence. The slopes of the subsidence curves are similar for the Labrador Shelf, the Nova Scotian Shelf, and the shelf off the northeastern U.S.A. More rapid and variable subsidence occurs northeast of Newfoundland and this may be associated, in a way yet to be established, with the anomalous foundered continental crust near the Orphan Knoll and Flemish Cap micro-continents which lie close to this area. After about 80 Ma, the subsidence appears to depart from the linear t1/2 law in a manner similar to the subsidence curves for oceanic crust, but this is not well established by the data. The present temperatures and temperature gradients computed using the slope of the subsidence curves show good agreement with measured values; geothermal gradients of 17.5 °C km−1 and 26 °C km−1 are calculated off Nova Scotia and Labrador respectively, and mean values of about 23 °C km−1 are observed. The computed temperature–time history within the sediments was used to estimate values of vitrinite reflectance, an indicator of the degree of organic metamorphism. These values show reasonable agreement with the measured values and suggest that only the Upper Jurassic and Lower Cretaceous sediments off Nova Scotia and the Paleocene sediments off Labrador are sufficiently mature to be good sources of petroleum. The linear t1/2 behaviour of the subsidence, and the good agreement between predicted and observed temperatures support the contention that cooling is largely responsible for the observed tectonic subsidence. The similarity of results from different areas suggests that the usefulness of the method is not restricted to a particular geographical area and may be applied to other rifted continental margins. Comparisons between the subsidence rates, thermal histories, and crustal structure at rifted margins on a worldwide scale may provide insights concerning the processes controlling their development. The temperature–time histories of the sediments estimated from the subsidence may be useful in establishing the potential of a rifted margin area for petroleum generation when little other information is available.


Sign in / Sign up

Export Citation Format

Share Document