scholarly journals Forced degradation studies and stability-indicating liquid chromatography method for determination of tirofiban hydrochloride and synthetic impurities

2020 ◽  
Vol 49 (2) ◽  
Author(s):  
Adriane Lettnin Roll Feijó ◽  
Fernanda Macke Hellwig ◽  
Clésio Soldateli Paim ◽  
Marcelo Donadel Malesuik
Keyword(s):  
Liquid Chromatography ◽  
Degradation Products ◽  
Gradient Elution ◽  
Pharmaceutical Products ◽  
Raw Material ◽  
Forced Degradation ◽  
Chromatography Method ◽  
Stability Indicating ◽  
Liquid Chromatography Method

This study aimed to develop and validate a stability-indicating liquid chromatography method for the determination of tirofiban hydrochloride and two synthetic impurities (impurity A and impurity C). The method utilizes a RP-18 column (250 mm × 4.6 mm; 5 μm) with the PDA detector for quantitation. A mixture of triethylamine 0.1% (acidified to pH 5.5 with phosphoric acid) and acetonitrile was used as the mobile phase at a flow rate of 1 mL min−1 with gradient elution. The method presented satisfactory linearity, precision, accuracy and robustness, as well as low limits of detection and quantification, which demonstrate sensitivity in the determination of tirofiban and impurities A and C. It was selective for the determination of the drug and impurities analysed, without interference of the degradation products generated under forced conditions, demonstrating the stability-indicating capacity of the proposed method. Tirofiban showed to be practically stable to oxidative (30% H2O2 for 24 h) and thermal (75 ºC for 24 h) conditions, but presented degradation to UVA light and acid hydrolysis, obeying the first order kinetics for both. In this way, it can be used as a stability-indicating method in the quality control of the raw material of tirofiban hydrochloride, as well as of the finished product. The obtained results demonstrate the importance of deepening the studies in this area, in order to guarantee the quality of commercialized pharmaceutical products.

scholarly journals STABILITY-INDICATING REVERSE-PHASE HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY METHOD FOR THE SIMULTANEOUS QUANTIFICATION OF APIGENIN AND LUTEOLIN FROM ACHILLEA MILLEFOLIUM LINN

2019 ◽  
pp. 169-172
Author(s):  
GOMATHY SUBRAMANIAN ◽  
S.N.MEYYANATHAN ◽  
GOWRAMMA BYRAN
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
High Performance ◽  
Degradation Products ◽  
Forced Degradation ◽  
Reverse Phase ◽  
Chromatography Method ◽  
Stability Indicating ◽  
Degradation Studies ◽  
Liquid Chromatography Method

Objective: A stability-indicating reverse-phase high-performance liquid chromatographic method was developed and validated for the analysis of apigenin and luteolin. The degradation behavior of apigenin and luteolin was investigated under different stress conditions as recommended by the International Conference on Harmonization (ICH). Methods: In the present study, a reversed-phase high-performance liquid chromatography method was developed and the resolution of the plant constituents was successfully achieved using Hibar Lichrospher C8 column with ultraviolet detector at a wavelength of 269 nm. The mobile phase consisted of methanol and 0.5% trifluoroacetic acid (80:20 v/v) at a flow rate of 1.0 ml/min. Both apigenin and luteolin were subjected to various stress degradation studies such as oxidation, acid and alkaline hydrolysis, and photolytic degradation. Results: The proposed method was found to be linear (1–5 μg/ml) with the linear correlation coefficient of R2=0.99. Although the degradation products of stressed conditions were not identified, the methods were able to detect the changes due to stress condition. Conclusion: The method provides good sensitivity and excellent precision and reproducibility. Forced degradation studies on apigenin and luteolin give information about their storage and intrinsic stability conditions considering the advanced pharmaceutical aspects of formulations.

scholarly journals Chemical Fingerprinting of Valeriana Species: Simultaneous Determination of Valerenic Acids, Flavonoids, and Phenylpropanoids Using Liquid Chromatography with Ultraviolet Detection

2006 ◽  
Vol 89 (1) ◽  
pp. 8-15 ◽  
Author(s):  
Andres Navarrete ◽  
Bharathi Avula ◽  
Young-Whan Choi ◽  
Ikhlas A Khan
Keyword(s):  
Liquid Chromatography ◽  
Phosphoric Acid ◽  
Chlorogenic Acid ◽  
Gradient Elution ◽  
Chromatography Method ◽  
Ultraviolet Detection ◽  
Chemical Fingerprinting ◽  
Liquid Chromatography Method ◽  
Valerenic Acids

Abstract The roots and rhizomes of various valeriana species are currently used as a sleeping aid or mild sedative. A liquid chromatography method has been developed that permits the analysis of chlorogenic acid, lignans, flavonoids, valerenic acids, and valpotrates in various valerian samples. The best results were obtained with a Phenomenex Luna C18(2) column using gradient elution with a mobile phase consisting of water and 0.05% phosphoric acid and 2100% acetonitrilemethanol (1 + 1) with 0.05% phosphoric acid. The flow rate was 0.8 mL/min and ultraviolet detection was at 207, 225, 254, 280, and 325 nm. Different valerian species and commercial products showed remarkable quantitative variations. Chlorogenic acid (0.21.2%), 3 lignans, linarin (0.0020.24%), and valepotriates were detected in all the valeriana species analyzed. Highest amounts of valerenic acids were detected in V. officinalis L., trace amounts in V. sitchensis, and none in the other species analyzed.

scholarly journals DEVELOPMENT AND VALIDATION OF STABILITY-INDICATING REVERSE-PHASE HIGHPERFORMANCE LIQUID CHROMATOGRAPHY METHOD FOR THE SIMULTANEOUS QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS OF REGADENOSON FROM ITS PARENTERAL DOSAGE FORM

2018 ◽  
Vol 11 (8) ◽  
pp. 277
Author(s):  
Murlidhar V Zope ◽  
Rahul M Patel ◽  
Ashwinikumari Patel ◽  
Samir G Patel
Keyword(s):  
Liquid Chromatography ◽  
Degradation Product ◽  
Mobile Phase ◽  
Dosage Form ◽  
Degradation Products ◽  
Reverse Phase ◽  
Chromatography Method ◽  
Stability Indicating ◽  
Liquid Chromatography Method ◽  
Injectable Dosage

Objective: The objective was to develop and validate the stability indicating reverse-phase high-performance liquid chromatography method for the quantification of potential degradation products of regadenoson (REGA) from its injectable dosage form.Methods: YMC-PAK ODS AQ, 150 mm × 4.6 mm, 3 μm composed with hydrophobic high carbon loading and a relatively hydrophilic surface chemically bonded to porous silica particles column was used with the temperature maintained at 40°C. Mobile phase A composed of 0.1% triethylamine buffer having pH 4.5 while mobile phase B is 100 % acetonitrile was used for gradient elution with 1.5 ml/min as a flow rate. The wavelength used for quantification was 245 nm and 20 μl as an injection volume. The suitability of the method has been checked and validated according to the International Council for Harmonization (ICH) guidelines for different parameters, namely, specificity, linearity, accuracy, precision, limit of quantification (LOQ), Limit of detection (LOQ), and robustness studies.Results: The resolution between REGA and its two-degradation product is >8.0 for all pairs of components. The high correlation coefficient (r2>0.990) values are for drug and all potential degradation products from LOQ to 150% of specification limits for impurities calculated based on the maximum daily dose of REGA. LOQ for the drug as well as each degradation product is <0.02% w/w. The % relative standard deviation (RSD) for precision and intermediate precision is in the range of 0.17–0.89, and % RSD for precision at LOQ is 0.86–2.35. The % RSD for robustness study is maximum 2.59.Conclusion: The developed method can quantify the specified and unknown degradation products from 0.1% in the injectable dosage form which indicates that method is sensitive. Method fulfills the ICH criteria for its different validation parameters and demonstrates that the developed analytical method is highly specific, precise, and robust and would have a great value when applied in quality control and stability studies for REGA injection.

Stability-indicating LC method for the determination of cephalothin in lyophilized powder for injection

2014 ◽  
Vol 6 (12) ◽  
pp. 4437-4445 ◽  
Author(s):  
Karen de Souza Rugani ◽  
Hérida Regina Nunes Salgado
Keyword(s):  
Liquid Chromatography ◽  
Degradation Products ◽  
Reversed Phase ◽  
Forced Degradation ◽  
Antimicrobial Compound ◽  
Reversed Phase Liquid Chromatography ◽  
Stability Indicating ◽  
Forced Degradation Studies ◽  
Phase Liquid

A stability-indicating gradient reversed phase liquid chromatography (RP-LC) method has been developed for the quantitative determination of cephalothin (CET), an antimicrobial compound, in the presence of its impurities and degradation products generated from forced degradation studies.

Sign in / Sign up

Export Citation Format

Share Document