Analysis of soft impingement in nonisothermal precipitation

2009 ◽  
Vol 24 (12) ◽  
pp. 3664-3673 ◽  
Author(s):  
Kai Fan ◽  
Feng Liu ◽  
Wei Yang ◽  
Gencang Yang ◽  
Yaohe Zhou
Keyword(s):  
Three Dimensional ◽  
Plain Carbon Steel ◽  
Model Parameters ◽  
Temperature Dependent ◽  
Analytical Treatment ◽  
Growth Coefficient ◽  
Soft Impingement ◽  
Compact Expression ◽  
Nonisothermal Heating ◽  
Dependent Growth

The effects of soft impingement on precipitation are considered. A physically realistic analytical treatment of soft impingement has been developed for solid-state precipitation in a nonisothermal heating/cooling process following the basic assumptions (i.e., a two-stage transformation including site saturation of nucleation, isotropic growth and linear approximation for a concentration gradient in front of the precipitate/matrix interface). Furthermore, both one- and three-dimensional precipitations have been described using a compact expression which is analogous to Zener’s model but with a temperature-dependent growth coefficient. A detailed description for the model parameters has been given for the model application. Good agreement with published experimental data, for example, the decomposition of austenite in a 0.038–0.30wt%Mn plain carbon steel, has been achieved.

scholarly journals Temperature-Dependent Growth Characteristics of Nb- and CoFe-Based Nanostructures by Direct-Write Using Focused Electron Beam-Induced Deposition

Micromachines ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Michael Huth ◽  
Fabrizio Porrati ◽  
Peter Gruszka ◽  
Sven Barth
Keyword(s):  
Computer Aided Design ◽  
Ion Beam ◽  
Three Dimensional ◽  
Reaction Diffusion ◽  
Reaction Diffusion Equation ◽  
Direct Write ◽  
Temperature Dependent ◽  
Exponential Factor ◽  
Dependent Growth ◽  
Aided Design

Focused electron and ion beam-induced deposition (FEBID/FIBID) are direct-write techniques with particular advantages in three-dimensional (3D) fabrication of ferromagnetic or superconducting nanostructures. Recently, two novel precursors, HCo 3 Fe(CO) 12 and Nb(NMe 3 ) 2 (N-t-Bu), were introduced, resulting in fully metallic CoFe ferromagnetic alloys by FEBID and superconducting NbC by FIBID, respectively. In order to properly define the writing strategy for the fabrication of 3D structures using these precursors, their temperature-dependent average residence time on the substrate and growing deposit needs to be known. This is a prerequisite for employing the simulation-guided 3D computer aided design (CAD) approach to FEBID/FIBID, which was introduced recently. We fabricated a series of rectangular-shaped deposits by FEBID at different substrate temperatures between 5 ° C and 24 ° C using the precursors and extracted the activation energy for precursor desorption and the pre-exponential factor from the measured heights of the deposits using the continuum growth model of FEBID based on the reaction-diffusion equation for the adsorbed precursor.

scholarly journals A General Temperature-Dependent Stress–Strain Constitutive Model for Polymer-Bonded Composite Materials

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1393
Author(s):  
Xiaochang Duan ◽  
Hongwei Yuan ◽  
Wei Tang ◽  
Jingjing He ◽  
Xuefei Guan
Keyword(s):  
Composite Materials ◽  
Constitutive Model ◽  
Model Parameters ◽  
Temperature Dependent ◽  
Stress Strain ◽  
Proposed Model ◽  
Single Temperature ◽  
Testing Data ◽  
Bonded Composite ◽  
Tension And Compression

This study develops a general temperature-dependent stress–strain constitutive model for polymer-bonded composite materials, allowing for the prediction of deformation behaviors under tension and compression in the testing temperature range. Laboratory testing of the material specimens in uniaxial tension and compression at multiple temperatures ranging from −40 ∘C to 75 ∘C is performed. The testing data reveal that the stress–strain response can be divided into two general regimes, namely, a short elastic part followed by the plastic part; therefore, the Ramberg–Osgood relationship is proposed to build the stress–strain constitutive model at a single temperature. By correlating the model parameters with the corresponding temperature using a response surface, a general temperature-dependent stress–strain constitutive model is established. The effectiveness and accuracy of the proposed model are validated using several independent sets of testing data and third-party data. The performance of the proposed model is compared with an existing reference model. The validation and comparison results show that the proposed model has a lower number of parameters and yields smaller relative errors. The proposed constitutive model is further implemented as a user material routine in a finite element package. A simple structural example using the developed user material is presented and its accuracy is verified.

scholarly journals A flexible framework for sequential estimation of model parameters in computational hemodynamics

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Christopher J. Arthurs ◽  
Nan Xiao ◽  
Philippe Moireau ◽  
Tobias Schaeffter ◽  
C. Alberto Figueroa
Keyword(s):  
Unscented Kalman Filter ◽  
Three Dimensional ◽  
Synthetic Data ◽  
Sequential Estimation ◽  
Wall Material ◽  
Patient Specific ◽  
Model Parameters ◽  
Computational Framework ◽  
Lumped Parameter ◽  
Estimation Of Model Parameters

AbstractA major challenge in constructing three dimensional patient specific hemodynamic models is the calibration of model parameters to match patient data on flow, pressure, wall motion, etc. acquired in the clinic. Current workflows are manual and time-consuming. This work presents a flexible computational framework for model parameter estimation in cardiovascular flows that relies on the following fundamental contributions. (i) A Reduced-Order Unscented Kalman Filter (ROUKF) model for data assimilation for wall material and simple lumped parameter network (LPN) boundary condition model parameters. (ii) A constrained least squares augmentation (ROUKF-CLS) for more complex LPNs. (iii) A “Netlist” implementation, supporting easy filtering of parameters in such complex LPNs. The ROUKF algorithm is demonstrated using non-invasive patient-specific data on anatomy, flow and pressure from a healthy volunteer. The ROUKF-CLS algorithm is demonstrated using synthetic data on a coronary LPN. The methods described in this paper have been implemented as part of the CRIMSON hemodynamics software package.

Modeling of Thermoplastic Materials for the Process-Simulation of Press-Fit Interconnections on Moulded Interconnected Devices

2012 ◽  
Vol 134 (3) ◽  
Author(s):  
Thomas Fellner ◽  
Elena Zukowski ◽  
Jürgen Wilde ◽  
H. Kück ◽  
H. Richter ◽  
...  
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Base Material ◽  
Creep Model ◽  
Assembly Process ◽  
Temperature Dependent ◽  
Reliability Modeling ◽  
Finite Element Software ◽  
Press Fit ◽  
Temperature Loads

This investigation is aimed at the modeling of both the fabrication process and the reliability of press-fit interconnections on moulded interconnect devices (MID). These are multifunctional three-dimensional substrates, produced by thermoplastic injection moulding for large-series applications. The assembly process and subsequently the durability of press-fit interconnections has been modeled and proved with a finite element software. Especially, a simulation tool for process optimizations was created and applied. In order to obtain realistic results, a creep model for the investigated base material, a liquid-crystal polymer (LCP), was generated and verified by experiments. Required friction coefficients between metal pin and base material were determined by adapting simulations and experiments. Retention forces of pins pressed into substrate holes during as well after the assembly process, and after temperature loads were predicted by simulations. Additionally, the decreasing extraction forces over time due to creep in the thermoplastic base material have been predicted for different storage temperatures as well with finite element analyses. Following, the numerical results of the process and reliability modeling were verified by experiments. It is concluded that the behavior of the mechanical contact of the pin-substrate system, can be suitably described time- and temperature-dependent.

Theory of ultrasonic attenuation in one and two dimensional metals

1976 ◽  
Vol 54 (14) ◽  
pp. 1454-1460 ◽  
Author(s):  
T. Tiedje ◽  
R. R. Haering
Keyword(s):  
Ultrasonic Attenuation ◽  
Three Dimensional ◽  
Electronic Systems ◽  
Two Dimensional ◽  
Temperature Dependent ◽  
One Dimensional ◽  
The Difference

The theory of ultrasonic attenuation in metals is extended so that it applies to quasi one and two dimensional electronic systems. It is shown that the attenuation in such systems differs significantly from the well-known results for three dimensional systems. The difference is particularly marked for one dimensional systems, for which the attenuation is shown to be strongly temperature dependent.

scholarly journals A faster escape does not enhance survival in zebrafish larvae

2017 ◽  
Vol 284 (1852) ◽  
pp. 20170359 ◽  
Author(s):  
Arjun Nair ◽  
Christy Nguyen ◽  
Matthew J. McHenry
Keyword(s):  
High Speed ◽  
Larval Fish ◽  
Body Position ◽  
Three Dimensional ◽  
Limited Range ◽  
The Body ◽  
Model Parameters ◽  
Fish Prey ◽  
Zebrafish Larvae ◽  
Fish Predators

An escape response is a rapid manoeuvre used by prey to evade predators. Performing this manoeuvre at greater speed, in a favourable direction, or from a longer distance have been hypothesized to enhance the survival of prey, but these ideas are difficult to test experimentally. We examined how prey survival depends on escape kinematics through a novel combination of experimentation and mathematical modelling. This approach focused on zebrafish ( Danio rerio ) larvae under predation by adults and juveniles of the same species. High-speed three-dimensional kinematics were used to track the body position of prey and predator and to determine the probability of behavioural actions by both fish. These measurements provided the basis for an agent-based probabilistic model that simulated the trajectories of the animals. Predictions of survivorship by this model were found by Monte Carlo simulations to agree with our observations and we examined how these predictions varied by changing individual model parameters. Contrary to expectation, we found that survival may not be improved by increasing the speed or altering the direction of the escape. Rather, zebrafish larvae operate with sufficiently high locomotor performance due to the relatively slow approach and limited range of suction feeding by fish predators. We did find that survival was enhanced when prey responded from a greater distance. This is an ability that depends on the capacity of the visual and lateral line systems to detect a looming threat. Therefore, performance in sensing, and not locomotion, is decisive for improving the survival of larval fish prey. These results offer a framework for understanding the evolution of predator–prey strategy that may inform prey survival in a broad diversity of animals.

3D-[Pr(Im)3(ImH)]@ImH: Ein dreidimensionales Netzwerk mit vollständiger Stickstoffkoordination aus einer Imidazolschmelze / 3D-[Pr(Im)3(ImH)]@ImH: A Three-Dimensional Network with Complete Nitrogen Coordination Obtained from an Imidazole Melt

2006 ◽  
Vol 61 (7) ◽  
pp. 792-798 ◽  
Author(s):  
Klaus Müller-Buschbaum
Keyword(s):  
Crystal Engineering ◽  
Material Science ◽  
Three Dimensional ◽  
Temperature Dependent ◽  
Temperature Synthesis ◽  
3 Dimensional ◽  
High Temperature Synthesis ◽  
Dimensional Network ◽  
Bright Green ◽  
Gas Molecules

The reaction of a melt of unsubstituted imidazole with praseodymium metal yields bright green crystals of 3D-[Pr(Im)3(ImH)]@ImH. Imidazolate ligands coordinate η1 via both N atoms their 1,3 positioning within the heterocycle being responsible for the connection of praseodymium atoms. A 3-dimensional network is formed with imidazole molecules from the melt intercalated in the crystal structure. The imidazole molecules can be released and temperature dependent reversibly be exchanged with gas molecules including argon. Thus the solvent free high temperature synthesis of rare earth elements with amine melts can also be utilized for “crystal engineering” and the synthesis of compounds with material science aspects. Furthermore 3D-[Pr(Im)3(ImH)]@ImH is the first unsubstituted imidazolate of the lanthanides.

Sign in / Sign up

Export Citation Format

Share Document