High energy density lithium-ion batteries with carbon nanotube anodes

2010 ◽  
Vol 25 (8) ◽  
pp. 1636-1644 ◽  
Author(s):  
Brian J. Landi ◽  
Cory D. Cress ◽  
Ryne P. Raffaelle
Keyword(s):  
Carbon Nanotube ◽  
Energy Density ◽  
High Capacity ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Electrically Conductive ◽  
Single Walled Carbon Nanotube ◽  
Battery Energy ◽  
Graphite Composites

Recent advancements using carbon nanotube electrodes show the ability for multifunctionality as a lithium-ion storage material and as an electrically conductive support for other high capacity materials like silicon or germanium. Experimental data show that replacement of conventional anode designs, which use graphite composites coated on copper foil, with a freestanding silicon-single-walled carbon nanotube (SWCNT) anode, can increase the usable anode capacity by up to 20 times. In this work, a series of calculations were performed to elucidate the relative improvement in battery energy density for such anodes paired with conventional LiCoO2, LiFePO4, and LiNiCoAlO2 cathodes. Results for theoretical flat plate prismatic batteries comprising freestanding silicon-SWCNT anodes with conventional cathodes show energy densities of 275 Wh/kg and 600 Wh/L to be theoretically achievable; this is a 50% improvement over today's commercial cells.

High-energy-density lithium-ion battery using a carbon-nanotube–Si composite anode and a compositionally graded Li[Ni0.85Co0.05Mn0.10]O2 cathode

2016 ◽  
Vol 9 (6) ◽  
pp. 2152-2158 ◽  
Author(s):  
Joo Hyeong Lee ◽  
Chong S. Yoon ◽  
Jang-Yeon Hwang ◽  
Sung-Jin Kim ◽  
Filippo Maglia ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Energy Density ◽  
Lithium Ion Battery ◽  
State Of The Art ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Rechargeable Battery ◽  
Composite Anode ◽  
Battery System

A Li-rechargeable battery system based on state-of-the-art cathode and anode technologies demonstrated high energy density, meeting demands for vehicle application.

scholarly journals Enhanced Roles of Carbon Architectures in High-Performance Lithium-Ion Batteries

2019 ◽  
Vol 11 (1) ◽  
Author(s):  
Lu Wang ◽  
Junwei Han ◽  
Debin Kong ◽  
Ying Tao ◽  
Quan-Hong Yang
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Electrochemical Performance ◽  
Lithium Ion Batteries ◽  
High Performance ◽  
High Capacity ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
High Mass

Abstract Lithium-ion batteries (LIBs), which are high-energy-density and low-safety-risk secondary batteries, are underpinned to the rise in electrochemical energy storage devices that satisfy the urgent demands of the global energy storage market. With the aim of achieving high energy density and fast-charging performance, the exploitation of simple and low-cost approaches for the production of high capacity, high density, high mass loading, and kinetically ion-accessible electrodes that maximize charge storage and transport in LIBs, is a critical need. Toward the construction of high-performance electrodes, carbons are promisingly used in the enhanced roles of active materials, electrochemical reaction frameworks for high-capacity noncarbons, and lightweight current collectors. Here, we review recent advances in the carbon engineering of electrodes for excellent electrochemical performance and structural stability, which is enabled by assembled carbon architectures that guarantee sufficient charge delivery and volume fluctuation buffering inside the electrode during cycling. Some specific feasible assembly methods, synergism between structural design components of carbon assemblies, and electrochemical performance enhancement are highlighted. The precise design of carbon cages by the assembly of graphene units is potentially useful for the controlled preparation of high-capacity carbon-caged noncarbon anodes with volumetric capacities over 2100 mAh cm−3. Finally, insights are given on the prospects and challenges for designing carbon architectures for practical LIBs that simultaneously provide high energy densities (both gravimetric and volumetric) and high rate performance.

Folding insensitive, high energy density lithium-ion battery featuring carbon nanotube current collectors

Carbon ◽  
2015 ◽  
Vol 87 ◽  
pp. 292-298 ◽  
Author(s):  
Jing Wei Hu ◽  
Zi Ping Wu ◽  
Sheng Wen Zhong ◽  
Wei Bo Zhang ◽  
Shravan Suresh ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Energy Density ◽  
Lithium Ion Battery ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Current Collectors

Carbon-based materials for lithium-ion capacitors

2019 ◽  
Vol 3 (7) ◽  
pp. 1265-1279 ◽  
Author(s):  
Xiaojun Wang ◽  
Lili Liu ◽  
Zhiqiang Niu
Keyword(s):  
Energy Density ◽  
Power Density ◽  
High Capacity ◽  
Lithium Ion ◽  
High Energy ◽  
High Rate ◽  
High Energy Density ◽  
Large Power ◽  
Excellent Stability ◽  
Carbon Based

Lithium-ion capacitors (LICs) can deliver high energy density, large power density and excellent stability since they possess a high-capacity battery-type electrode and a high rate capacitor-type electrode.

scholarly journals Porous Co2VO4 Nanodisk as a High-Energy and Fast-Charging Anode for Lithium-Ion Batteries

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Jinghui Ren ◽  
Zhenyu Wang ◽  
Peng Xu ◽  
Cong Wang ◽  
Fei Gao ◽  
...  
Keyword(s):  
Energy Density ◽  
Lithium Ion Batteries ◽  
High Capacity ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
High Energy ◽  
High Specific Surface Area ◽  
High Energy Density ◽  
Safety Issues ◽  
Fast Charging

AbstractHigh-energy–density lithium-ion batteries (LIBs) that can be safely fast-charged are desirable for electric vehicles. However, sub-optimal lithiation potential and low capacity of commonly used LIBs anode cause safety issues and low energy density. Here we hypothesize that a cobalt vanadate oxide, Co2VO4, can be attractive anode material for fast-charging LIBs due to its high capacity (~ 1000 mAh g−1) and safe lithiation potential (~ 0.65 V vs. Li+/Li). The Li+ diffusion coefficient of Co2VO4 is evaluated by theoretical calculation to be as high as 3.15 × 10–10 cm2 s−1, proving Co2VO4 a promising anode in fast-charging LIBs. A hexagonal porous Co2VO4 nanodisk (PCVO ND) structure is designed accordingly, featuring a high specific surface area of 74.57 m2 g−1 and numerous pores with a pore size of 14 nm. This unique structure succeeds in enhancing Li+ and electron transfer, leading to superior fast-charging performance than current commercial anodes. As a result, the PCVO ND shows a high initial reversible capacity of 911.0 mAh g−1 at 0.4 C, excellent fast-charging capacity (344.3 mAh g−1 at 10 C for 1000 cycles), outstanding long-term cycling stability (only 0.024% capacity loss per cycle at 10 C for 1000 cycles), confirming the commercial feasibility of PCVO ND in fast-charging LIBs.

Sign in / Sign up

Export Citation Format

Share Document