Device Characterization of CdSe/poly[2-methoxy-5-(2’-ethylhexyloxy)-1,4-(1-cyanovinylene)phenylene] Nanocomposite Infrared Photodetectors Deposited via Matrix Assisted Pulsed Laser Evaporation on GaAs

2008 ◽  
Author(s):  
Kevin R. Lantz ◽  
Ryan Pate ◽  
Adrienne D. Stiff-Roberts
Keyword(s):  
Pulsed Laser ◽  
Laser Evaporation ◽  
Infrared Photodetectors ◽  
Device Characterization

Synthesis and Characterization of MoS2 Thin Films Grown by Pulsed Laser Evaporation

1988 ◽  
Vol 140 ◽  
Author(s):  
M. S. Donley ◽  
P. T. Murray ◽  
N. T. McDevitt
Keyword(s):  
Thin Films ◽  
Pulsed Laser ◽  
Plasma Temperature ◽  
Laser Evaporation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Plot Analysis ◽  
Glancing Angle ◽  
Substrate Temperatures

AbstractThe growth and characterization of MoS thin films grown by pulsed laser evaporation is investigated. TOF anafysis of the ions evaporated from an MoS2 target indicates that PLE results primarily in the evaporation of atomic Mo and S species; MoxSy clusters were also detected, but were present at a significantly Iower intensity. TOF velocity analysis indicates an effective plasma temperature of 1500K. Stoichiometric MoS2 films were grown at substrate temperatures between room temperature and 500ºC under the above laser conditions. XPS data is used to develop a Wagner chemical state plot. Analysis of the films by Raman spectroscopy and glancing angle x-ray diffraction indicates the films to be crystalline, hexagonal MoS2, with a tendency for basal plane orientation parallel to the substrate.

Characterization of lysozyme films produced by matrix assisted pulsed laser evaporation (MAPLE)

2007 ◽  
Vol 253 (15) ◽  
pp. 6451-6455 ◽  
Author(s):  
Andreea Purice ◽  
Jørgen Schou ◽  
Peter Kingshott ◽  
Nini Pryds ◽  
Maria Dinescu
Keyword(s):  
Pulsed Laser ◽  
Laser Evaporation

Deposition and Characterization of Laccase Thin Films Obtained by Matrix Assisted Pulsed Laser Evaporation

2015 ◽  
pp. 47-51 ◽  
Author(s):  
Nunzia Cicco ◽  
Antonio Morone ◽  
Maria Verrastro ◽  
Maria Dinescu ◽  
Andreea Matei ◽  
...  
Keyword(s):  
Thin Films ◽  
Pulsed Laser ◽  
Laser Evaporation

Characterization of ethylcellulose and hydroxypropyl methylcellulose thin films deposited by matrix-assisted pulsed laser evaporation

2014 ◽  
Vol 302 ◽  
pp. 87-91 ◽  
Author(s):  
A. Palla-Papavlu ◽  
L. Rusen ◽  
V. Dinca ◽  
M. Filipescu ◽  
T. Lippert ◽  
...  
Keyword(s):  
Thin Films ◽  
Hydroxypropyl Methylcellulose ◽  
Pulsed Laser ◽  
Laser Evaporation

Preparation and characterization of CuSbSe2 thin films deposited by pulsed laser deposition

2021 ◽  
Vol 127 ◽  
pp. 105716
Author(s):  
Tianzhen Guo ◽  
Dan Wang ◽  
Yajun Yang ◽  
Xiaoyong Xiong ◽  
Kelin Li ◽  
...  
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Laser Deposition

Processing by Pulsed Laser Deposition and Structural, Morphological and Chemical Characterization of Bi-Pb-Sr-Ca-Cu-O and Bi-Pb-Sb-Sr-Ca-Cu-O Thin Films

2010 ◽  
Vol 75 ◽  
pp. 202-207
Author(s):  
Victor Ríos ◽  
Elvia Díaz-Valdés ◽  
Jorge Ricardo Aguilar ◽  
T.G. Kryshtab ◽  
Ciro Falcony
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Room Temperature ◽  
Pulsed Laser ◽  
Chemical Characterization ◽  
Laser Deposition ◽  
Nominal Composition ◽  
Deposition Parameters ◽  
The Relationship

Bi-Pb-Sr-Ca-Cu-O (BPSCCO) and Bi-Pb-Sb-Sr-Ca-Cu-O (BPSSCCO) thin films were grown on MgO single crystal substrates by pulsed laser deposition. The deposition was carried out at room temperature during 90 minutes. A Nd:YAG excimer laser ( = 355 nm) with a 2 J/pulse energy density operated at 30 Hz was used. The distance between the target and substrate was kept constant at 4,5 cm. Nominal composition of the targets was Bi1,6Pb0,4Sr2Ca2Cu3O and Bi1,6Pb0,4Sb0,1Sr2Ca2Cu3OSuperconducting targets were prepared following a state solid reaction. As-grown films were annealed at different conditions. As-grown and annealed films were characterized by XRD, FTIR, and SEM. The films were prepared applying an experimental design. The relationship among deposition parameters and their effect on the formation of superconducting Bi-system crystalline phases was studied.

Sign in / Sign up

Export Citation Format

Share Document