Evolution of Stress During Formation of Titanium Disilicide by Rta and Tube Furnace Annealing

1990 ◽  
Vol 202 ◽  
Author(s):  
J.F. Jongste ◽  
O.B. Loopstra ◽  
G.C.A.M. Janssen ◽  
S. Radelaar
Keyword(s):  
Integrated Circuit ◽  
Thermal Processing ◽  
Reaction Rates ◽  
Titanium Disilicide ◽  
Furnace Annealing ◽  
Integrated Circuit Fabrication ◽  
Annealing Step ◽  
Circuit Fabrication ◽  
The Difference ◽  
Processing Steps

Integrated circuit fabrication consists of many processing steps: e.g. lithography, etching, implantation and metallization. Some of these processes are combined with thermal processing. Heat treatments require special attention because previous fabrication steps may be influenced: e.g. dopant profiles may be deteriorated. The amount of interference of an annealing step with a former process is determined by the ratio of the reaction rates (and hence by the difference in activation energies).

Silicon Rapid Thermal Processing with Ripple Pyrometry

1997 ◽  
Vol 502 ◽  
Author(s):  
A. T. Fiory
Keyword(s):  
Integrated Circuit ◽  
Thermal Processing ◽  
Wide Field ◽  
Loop Control ◽  
Dopant Activation ◽  
Integrated Circuit Fabrication ◽  
Metal Silicides ◽  
Circuit Fabrication ◽  
Infrared Lamps

ABSTRACTThermal processing in silicon integrated circuit fabrication steps for dopant activation, metal silicides, annealing, and oxidation commonly uses single-wafer furnaces that rapidly heat wafers with incandescent infrared lamps. Radiation pyrometers and thermocouple probes are the principle methods of measuring wafer temperature for closed-loop control of rapid thermal processes. The challenge with thermocouples is in dealing with heat from the lamps and non-ideal thermally resistive wafer contact. The challenge with pyrometry is in compensating for the variable emissivity of wafer surfaces and suppressing interference from the lamps. Typical deposited or grown layers of silicon nitride, silicon dioxide, and polycrystalline silicon can produce dramatic changes in emissivity. Layer thicknesses and composition are generally not known with sufficient accuracy, so a method for real time in situ emissivity compensation is required. Accufiber introduced a “ripple technique” to address this issue. The idea is to use two probes, separately sensing radiation from the wafer and the lamps, and extracting AC and quasi-DC parts from each. The AC signals provide a measure of the reflectivity of the wafer, and thence emissivity, as well as the fraction of reflected lamp radiation present in the DC signals. Lucent Technologies introduced a method of using AC lamp ripple to measure wafer temperatures with two radiation probes at a wall in the furnace. One probe views radiation emanating from the wafer through a gap in the lamp array. The other probe has a wide field of view to include lamp radiation. The accuracy of Lucent devices, determined from process results on wafers with various emissivities, is typically in the range of 12°C to 18°C at three standard deviations.

A Fresh Insight into Film Morphology Measurement Techniques for Advanced Ulsi Manufacturing

1993 ◽  
Vol 309 ◽  
Author(s):  
Seshadri Ramaswami
Keyword(s):  
Grain Size ◽  
Integrated Circuit ◽  
Measurement Techniques ◽  
Film Morphology ◽  
Integrated Circuit Fabrication ◽  
Circuit Fabrication ◽  
Non Destructive ◽  
Fresh Insight ◽  
Insight Into

AbstractA laser based non-destructive technique has been used to study the morphology of sputterdeposited aluminum alloy films. The data emanating from the Therma-wave Imager that makes use of this principle, has been correlated with reflectivity, grain size and micro-roughness of the film. In addition, through the use of a case study, this paper demonstrates the utility of this application as an in-line monitor in an integrated circuit fabrication line.

Simple Methods for Design of Narrowband High-Pass FIR Filters

2005 ◽  
pp. 2492-2498
Author(s):  
Gordana Jovanovic-Dolecek
Keyword(s):  
Integrated Circuit ◽  
High Reliability ◽  
Low Cost ◽  
Rapid Development ◽  
Digital Signal ◽  
Fir Filters ◽  
Integrated Circuit Fabrication ◽  
Circuit Fabrication ◽  
Analog Systems ◽  
High Pass

Digital signal processing (DSP) is an area of engineering that “has seen explosive growth during the past three decades” (Mitra, 2001). Its rapid development is a result of significant advances in digital computer technology and integrated circuit fabrication (Smith, 2002; Jovanovic-Dolecek, 2002). Diniz, Silva, and Netto (2002) state that “the main advantages of digital systems relative to analog systems are high reliability, suitability for modifying the system’s characteristics, and low cost.”

Sign in / Sign up

Export Citation Format

Share Document