scholarly journals Comparisons Of Observed And Simulated Atomic Structures Of Pd/NiO Heterophase Interfaces

1992 ◽  
Vol 295 ◽  
Author(s):  
M. I. Buckett ◽  
J. P. Shaffer ◽  
Karl L. Merkle

AbstractHigh-resolution electron microscopy (HREM) and image simulations using the multislice algorithm have been used to study the atomic structure of a Pd/NiO (111) interface in an intemally oxidized sample. Samples prepared in this way result in cube-on-cube oriented or twin-related precipitates whose (111) interfaces exhibit a contrast modulation along the boundary plane in HREM images. Previous studies have reported that the observed structural period of this modulation corresponds qualitatively to the expected spacing if the boundary was composed of a network of misfit dislocations. In this study, rigid models of the (111) interface as viewed from the [110] direction were simulated using the EMS suite of programs. The questions we address are: (1) whether the terminating plane on the oxide side is made up of a Ni or an 0 layer, and (2) whether a rigid body translation normal to the interface exists. Finally, the results of the simulations are compared and contrasted to through-focal experimental images to investigate the origin of the contrast modulations and their possible relation to the extent of the misfit localization in these systems.

Author(s):  
J.L. Batstone ◽  
J.M. Gibson ◽  
Alice.E. White ◽  
K.T. Short

High resolution electron microscopy (HREM) is a powerful tool for the determination of interface atomic structure. With the previous generation of HREM's of point-to-point resolution (rpp) >2.5Å, imaging of semiconductors in only <110> directions was possible. Useful imaging of other important zone axes became available with the advent of high voltage, high resolution microscopes with rpp <1.8Å, leading to a study of the NiSi2 interface. More recently, it was shown that images in <100>, <111> and <112> directions are easily obtainable from Si in the new medium voltage electron microscopes. We report here the examination of the important Si/Si02 interface with the use of a JEOL 4000EX HREM with rpp <1.8Å, in a <100> orientation. This represents a true structural image of this interface.


Author(s):  
J.M. Howe ◽  
R. Gronsky

The technique of high-resolution electron microscopy (HREM) is invaluable to the materials scientist because it allows examination of microstructural features at levels of resolution that are unobtainable by most other methods. Although the structural information which can be determined by HREM and accompanying image simulations has been well documented in the literature, there have only been a few cases where this technique has been used to reveal the chemistry of individual columns or planes of atoms, as occur in segregated and ordered materials.


1985 ◽  
Vol 56 ◽  
Author(s):  
C. CHOI ◽  
N. OTSUKA ◽  
L. A. KOLODZIEJSKI ◽  
R. L. GUNSHOR-a

AbstractStructures of CdTe-Cd0.6Mn0.4Te superlattices which are caused by the lattice mismatch between suterlattice layers have been studied by high resolution electron microscopy (HREM). In thin-layer superlattices, the crystal lattice in each layeris elastically distorted, resulting in the change of the crystal symmetry from cubic to rhombohedral. The presence of the small rhombohedral distrotion has been confirmed through a phase contrast effect in HREM images. In a thick-layer superlattice, the lattice mismatch is accommodated by dissociated misfit dislocations. Burgers vectors of partial misfit dislocations have been identified from the shift of lattice fringes in HREM images.


1993 ◽  
Vol 8 (9) ◽  
pp. 2112-2127 ◽  
Author(s):  
A. Bardal ◽  
O. Eibl ◽  
Th. Matthée ◽  
G. Friedl ◽  
J. Wecker

The microstructures of YBa2Cu3O7−δ (YBCO) thin films grown on Si with Y-stabilized ZrO2 (YSZ) and Y2O3 buffer layers were characterized by means of high-resolution electron microscopy. At the Si–YSZ interface, a 2.5 nm thick layer of regrown amorphous SiOx is present. The layer is interrupted by crystalline regions, typically 5 to 10 nm wide and 10 to 50 nm apart. Close to the crystalline regions, {111} defects are present in the Si substrate. The typical defect observed is an extrinsic stacking fault plus a perfect dislocation close to the stacking fault which terminates extra {111} planes in the upper part of the Si. These defects are probably formed by condensation of Si self-interstitials created during oxide regrowth. Precipitates are present in the Si close to the Si–YSZ interface and indicate that in-diffusion of Zr has occurred. The YSZ–Y2O3 interface is atomically sharp and essentially planar and contains no second phases. Perfect misfit dislocations with Burgers vector 1/2〈110〉 are present at this interface along with unrelaxed elastic misfit stresses. The Y2O3–YBCO interface is atomically sharp and planar, but contains steps. (001) stacking faults are present in the YBCO above these steps; the faults are, however, healed a few unit cells away from the interface. By HREM analysis of ultrathin specimen areas, the atomic layer of the YBCO closest to the Y2O3 was found to be a barium-oxygen layer.


1990 ◽  
Vol 202 ◽  
Author(s):  
A. Catana ◽  
P.E. Schmid

ABSTRACTHigh Resolution Electron Microscopy (HREM) and image calculations are combined to study microstructural changes related to the CoSi/Si-CoSi/CoSi2/Si-CoSi2/Si transformations. The samples are prepared by UHV e-beam evaporation of Co layers (2 nm) followed by annealing at 300°C or 400°C. Cross-sectional observations at an atomic scale show that the silicidation of Co at the lower temperature yields epitaxial CoSi/Si domains such that [111]Si // [111]CoSi and <110>Si // <112>CoSi. At about 400°C CoSi2 nucleates at the CoSi/Si interface. During the early stages of this chemical reaction, an epitaxial CoSi/CoSi2/Si system is observed. The predominant orientation is such that (021) CoSi planes are parallel to (220) CoSi2 planes, the CoSi2/Si interface being of type B. The growth of CoSi2 is shown to proceed at the expense of both CoSi and Si.


1986 ◽  
Vol 49 (5) ◽  
pp. 277-279 ◽  
Author(s):  
N. Otsuka ◽  
C. Choi ◽  
Y. Nakamura ◽  
S. Nagakura ◽  
R. Fischer ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document