Interfacial Atomic Structures During Cobalt Silicidation

1990 ◽  
Vol 202 ◽  
Author(s):  
A. Catana ◽  
P.E. Schmid
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Atomic Scale ◽  
Type B ◽  
Cross Sectional ◽  
Atomic Structures ◽  
Resolution Electron ◽  
Predominant Orientation ◽  
Lower Temperature

ABSTRACTHigh Resolution Electron Microscopy (HREM) and image calculations are combined to study microstructural changes related to the CoSi/Si-CoSi/CoSi2/Si-CoSi2/Si transformations. The samples are prepared by UHV e-beam evaporation of Co layers (2 nm) followed by annealing at 300°C or 400°C. Cross-sectional observations at an atomic scale show that the silicidation of Co at the lower temperature yields epitaxial CoSi/Si domains such that [111]Si // [111]CoSi and <110>Si // <112>CoSi. At about 400°C CoSi2 nucleates at the CoSi/Si interface. During the early stages of this chemical reaction, an epitaxial CoSi/CoSi2/Si system is observed. The predominant orientation is such that (021) CoSi planes are parallel to (220) CoSi2 planes, the CoSi2/Si interface being of type B. The growth of CoSi2 is shown to proceed at the expense of both CoSi and Si.

Atomic Scale Study of Cosi/Si (111) and CoSi2/Si (111) Interfaces

1989 ◽  
Vol 159 ◽  
Author(s):  
A. Catana ◽  
M. Heintze ◽  
P.E. Schmid ◽  
P. Stadelmann
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
High Resolution ◽  
Orientation Relationship ◽  
Cross Sections ◽  
High Resolution Electron Microscopy ◽  
Atomic Scale ◽  
Type B ◽  
Initial Stage ◽  
Resolution Electron

ABSTRACTHigh Resolution Electron Microscopy (HREM) was used to study microstructural changes related to the CoSi/Si-CoSi/CoSi2/Si-CoSi2/Si transformations. CoSi is found to grow epitaxially on Si with [111]Si // [111]CoSi and < 110 >Si // < 112 >CoSi. Two CoSi non-equivalent orientations (rotated by 180° around the substrate normal) can occur in this plane. They can be clearly distinguished by HRTEM on cross-sections ( electron beam along [110]Si). At about 500°C CoSi transforms to CoSi2. Experimental results show that the type B orientation relationship satisfying [110]Si // [112]CoSi is preserved after the initial stage of CoSi2 formation. At this stage an epitaxial CoSi/CoSi2/Si(111) system is obtained. The atomic scale investigation of the CoSi2/Si interface shows that a 7-fold coordination of the cobalt atoms is observed in both type A and type B epitaxies.

X-Ray-Optical Multilayer Structures Studied Using High Resolution Electron Microscopy.

1986 ◽  
Vol 77 ◽  
Author(s):  
Mary Beth Stearns ◽  
Amanda K. Petford-Long ◽  
C.-H. Chang ◽  
D. G. Stearns ◽  
N. M. Ceglio ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Substrate Surface ◽  
High Resolution Electron Microscopy ◽  
Atomic Scale ◽  
Degree Of Crystallinity ◽  
Multilayer Systems ◽  
Layer Width ◽  
X Ray ◽  
Resolution Electron

ABSTRACTThe technique of high resolution electron microscopy has been used to examine the structure of several multilayer systems (MLS) on an atomic scale. Mo/Si multilayers, in use in a number of x-ray optical element applications, and Mo/Si multilayers, of interest because of their magnetic properties, have been imaged in cross-section. Layer thicknesses, flatness and smoothness have been analysed: the layer width can vary by up to 0.6nm from the average value, and the layer flatness depends on the quality of the substrate surface for amorphous MLS, and on the details of the crystalline growth for the crystalline materials. The degree of crystallinity and the crystal orientation within the layers have also been investigated. In both cases, the high-Z layers are predominantly crystalline and the Si layers appear amorphous. Amorphous interfacial regions are visible between the Mo and Si layers, and crystalline cobalt suicide interfacial regions between the Co and Si layers. Using the structural measurements obtained from the HREM results, theoretical x-ray reflectivity behaviour has been calculated. It fits the experimental data very well.

Study of the growth mechanism of highly in-plane aligned α-axis YBa2Cu3O7−x thin films on LaSrGaO4 substrate by high resolution electron microscopy

1996 ◽  
Vol 11 (12) ◽  
pp. 2951-2954 ◽  
Author(s):  
J. G. Wen ◽  
S. Mahajan ◽  
H. Ohtsuka ◽  
T. Morishita ◽  
N. Koshizuka
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Cross Sectional ◽  
Plan View ◽  
Oriented Film ◽  
Resolution Electron ◽  
Average Size

Highly in-plane aligned α-axis YBa2Cu3O7−x thin films deposited on (100) LaSrGaO4 substrates by a self-template method were studied by high-resolution electron microscopy along three orthogonal 〈100〉 axes of the substrate. Plan-view images confirm that the majority of the film preferentially aligns across the entire substrate except for very few misaligned domains with average size 10 nm2. Cross-sectional images along the [100] orientation of YBa2Cu3O7−x reveal that in-plane aligned α-axis YBa2Cu3O7−x is grown on a template layer dominated by c-axis oriented film. This strongly suggests that the in-plane alignment of α-axis YBa2Cu3O7−x thin films on (100) LaSrGaO4 substrates is governed by the different stresses along the b and c axes of the substrate. Cross-sectional images along [001] of the YBa2Cu3O7—x thin film reveal that the 90° domains easily nucleate in the region between α-axis YBa2Cu3O7—x and the YBa4Cu3Ox phase. Cracks along the (001) plane of YBa2Cu3O7−x are found to be due to the large mismatch between the c parameters of the thin film and substrate.

A HREM study of V/Al2O3 interface

1992 ◽  
Vol 50 (1) ◽  
pp. 146-147
Author(s):  
Y. Ikuhara ◽  
P. Pirouz ◽  
A. H. Heuer ◽  
S. Yadavalli ◽  
C. P. Flynn
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
High Resolution ◽  
Substrate Temperature ◽  
Molecular Beam ◽  
High Resolution Electron Microscopy ◽  
Interface Structure ◽  
Cross Sectional ◽  
Plan View ◽  
Resolution Electron

The interface structure between vanadium and the R-plane of sapphire (α-Al2O3) was studied by conventional and cross-sectional high resolution electron microscopy (HREM) to clarify the atomic structure of the interface.A 57 nm thick vanadium film was deposited on the (1102) (R) plane of sapphire by molecular beam epitaxy (MBE) at a substrate temperature of 920 K in a vacuum of 10-10torr. The HREM observations of the interface were done from three directions: two cross-sectional views (parallel to [0221]Al2O3 and [1120]Al2O3) and a plan view (parallel to [2201]Al2O3) by a top-entry JEOL 4000EX electron microscope (400 kV).

Sign in / Sign up

Export Citation Format

Share Document