Hydroxyapatite Ceramics from Hydrothermally Prepared Powders

1994 ◽  
Vol 346 ◽  
Author(s):  
C.H. Lin ◽  
C.W. Huang ◽  
S.C. Chang
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Reaction Time ◽  
Human Bone ◽  
Hydroxyapatite Ceramics ◽  
Commercial Source

ABSTRACTHydroxyapatite (Ca5(P04)3(0H)) is an effective material for artificial human bone production. Hydroxyapatite powders were hydrothermally produced in this work by reacting Ca(OH)2 with Na3PO4·12H2O in an autoclave at various temperature and for various times. The particle size of hydroxyapatite was observed to be very fine, uniform, around 50 nm, as well as independent of reaction time.The hydroxyapatite powders were compacted and sintered at various temperatures for 2 hrs. The density, grain size, and hardness of the hydroxyapatite ceramics were measured and compared with those of the hydroxyapatite ceramics produced by the powders from the commercial source. The hydroxyapatite ceramics from the hydrothermal powders were found to have a higher density, smaller grain size, and higher hardness.After the hydroxyapatite ceramics were dipped in a simulated biological body liquid for 10 days, the density and hardness of the hydrooxyapatite ceramics from the hydrothermal powders were less deteriorated than those of the hydroxyapatite ceramics from the commercial powder.

Effect of the Adjuvants on the Properties of Superfine SnO2 Powders

2018 ◽  
Vol 281 ◽  
pp. 705-709
Author(s):  
Jie Guang Song ◽  
Lin Chen ◽  
Xian Jie Zhou ◽  
Xue Yang ◽  
Xin Peng Lou ◽  
...  
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Solar Cells ◽  
Reaction Time ◽  
Powder Material ◽  
Tin Oxide ◽  
Molar Ratio ◽  
New Type ◽  
And Performance ◽  
Holding Temperature

Ultrafine SnO2 is a new type of material, in the field of solar cells and semiconductors have a lot of use. To get different morphology and different properties of tin oxide powder material, making more applications in the field, the effect of the adjuvants on the properties of superfine SnO2 powders were distigated. Through the analysis of experimental results, the conclusions are shown the stronger the alkalinity of the auxiliary agent, the larger the grain size of the obtained particles and the more uniform the particles. When the molar ratio of salt to alkali is more than 1: 4, the amount of alkali is gradually reduced, the particle size is small, the morphology is not uniform and easy to agglomerate. When the molar ratio of salt to alkali is 1: 4, the smaller particle size is shown, the appearance morphology is uneven. The longer the reaction time, the more complete the grain, the more uniform the morphology. Under the condition of SnCl4 concentration of 0.05mol/L, reaction time is 4 days, salt and alkali molar ratio is 1: 4, holding temperature is 200°C, the auxiliary agent is NaOH, the size, shape and performance of synthesized SnO2 are the better.

Effect of the Adjuvants on the Properties of Superfine SnO2 Powders

2018 ◽  
Vol 934 ◽  
pp. 35-40
Author(s):  
Jie Guang Song ◽  
Cai Liang Pang ◽  
Yue Liu ◽  
Jia Zhang ◽  
Lin Chen ◽  
...  
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Solar Cells ◽  
Reaction Time ◽  
Powder Material ◽  
Tin Oxide ◽  
Experimental Results ◽  
Molar Ratio ◽  
New Type ◽  
Holding Temperature

Ultrafine SnO2 is a new type of material, in the field of solar cells and semiconductors have a lot of use. To get different morphology and different properties of tin oxide powder material, making more applications in the field, the effect of the adjuvants on the properties of superfine SnO2 powders were distigated. Through the analysis of experimental results, the conclusions are shown the stronger the alkalinity of the auxiliary agent, the larger the grain size of the obtained particles and the more uniform the particles. When the molar ratio of salt to alkali is more than 1: 4, the amount of alkali is gradually reduced, the particle size is small, the morphology is not uniform and easy to agglomerate. When the molar ratio of salt to alkali is 1: 4, the smaller particle size is shown, the appearance morphology is uneven. The longer the reaction time, the more complete the grain, the more uniform the morphology. Under the condition of SnCl4 concentration of 0.05 mol/L, reaction time is 4 days, salt and alkali molar ratio is 1: 4, holding temperature is 200 °C, the auxiliary agent is NaOH, the size, shape and properties of synthesized SnO2 are the better.

Effect of Synthetic Technology on the Properties of Co2O3 Powder

2018 ◽  
Vol 281 ◽  
pp. 46-51
Author(s):  
Ge Xiong ◽  
Hui Min Sun ◽  
Xue Yang ◽  
Jin Shi Li ◽  
Mei Hua Chen ◽  
...  
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Reaction Time ◽  
Hydrothermal Synthesis ◽  
Salt Solution ◽  
Average Particle Size ◽  
Particle Aggregation ◽  
Molar Ratio ◽  
Average Particle

Ultrafine Co2O3powder was prepared via hydrothermal synthesis. The effect of technology on the performance of the superfine Co2O3powders was investigated, and the hydrothermal parameters in preparing Co2O3were gradually improved. In addition, the morphology and grain size of the Co2O3powder were analyzed by FESEM. Results show that reducing the salt–alkali molar ratio resulted in more uniform Co2O3powder and smaller particles, with average particle size of approximately 40 nm. Reaction time displayed little effect on the Co2O3powder, but the particle size decreased with the reaction time. The concentration of salt solution remarkably affected the morphology of the Co2O3powder. Lower concentration resulted in smaller particle aggregation and particle size.

scholarly journals Feasibility of fly ash as fluxing agent in mid- and low-grade phosphate rock carbothermal reduction and its reaction kinetics

2021 ◽  
Vol 10 (1) ◽  
pp. 157-168
Author(s):  
Biwei Luo ◽  
Pengfei Li ◽  
Yan Li ◽  
Jun Ji ◽  
Dongsheng He ◽  
...  
Keyword(s):  
Particle Size ◽  
Fly Ash ◽  
Reaction Time ◽  
Carbothermal Reduction ◽  
Industrial Waste ◽  
Phosphate Rock ◽  
Molar Ratio ◽  
Low Grade ◽  
Carbon Excess ◽  
Fluxing Agent

Abstract The feasibility of industrial waste fly ash as an alternative fluxing agent for silica in carbothermal reduction of medium-low-grade phosphate ore was studied in this paper. With a series of single-factor experiments, the reduction rate of phosphate rock under different reaction temperature, reaction time, particle size, carbon excess coefficient, and silicon–calcium molar ratio was investigated with silica and fly ash as fluxing agents. Higher reduction rates were obtained with fly ash fluxing instead of silica. The optimal conditions were derived as: reaction temperature 1,300°C, reaction time 75 min, particle size 48–75 µm, carbon excess coefficient 1.2, and silicon–calcium molar ratio 1.2. The optimized process condition was verified with other two different phosphate rocks and it was proved universally. The apparent kinetics analyses demonstrated that the activation energy of fly ash fluxing is reduced by 31.57 kJ/mol as compared with that of silica. The mechanism of better fluxing effect by fly ash may be ascribed to the fact that the products formed within fly ash increase the amount of liquid phase in the reaction system and promote reduction reaction. Preliminary feasibility about the recycling of industrial waste fly ash in thermal phosphoric acid industry was elucidated in the paper.

Fabrication of Nanostructured Fe-Co Alloy Powders by Hydrogen Reduction and Its Magnetic Properties

2007 ◽  
Vol 534-536 ◽  
pp. 1389-1392
Author(s):  
Young Jung Lee ◽  
Baek Hee Lee ◽  
Gil Su Kim ◽  
Kyu Hwan Lee ◽  
Young Do Kim
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Grain Size ◽  
Magnetic Properties ◽  
Nanostructured Materials ◽  
Hydrogen Reduction ◽  
Internal Strain ◽  
Oxide Powder ◽  
Powder Mixtures ◽  
Effect Of Microstructure

Magnetic properties of nanostructured materials are affected by the microstructures such as grain size (or particle size), internal strain and crystal structure. Thus, it is necessary to study the synthesis of nanostructured materials to make significant improvements in their magnetic properties. In this study, nanostructured Fe-20at.%Co and Fe-50at.%Co alloy powders were prepared by hydrogen reduction from the two oxide powder mixtures, Fe2O3 and Co3O4. Furthermore, the effect of microstructure on the magnetic properties of hydrogen reduced Fe-Co alloy powders was examined using XRD, SEM, TEM, and VSM.

Controlled experiments and finite element simulations with the Swiss plate geophone bedload monitoring system: particle size identification and transport mode

2021 ◽  
Author(s):  
Zheng Chen ◽  
Siming He ◽  
Tobias Nicollier ◽  
Lorenz Ammann ◽  
Alexandre Badoux ◽  
...  
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Finite Element ◽  
Quantitative Agreement ◽  
Bedload Transport ◽  
Material Structure ◽  
Flume Experiments ◽  
Fem Simulations ◽  
Transport Mode ◽  
Signal Response

<p>The Swiss plate geophone (SPG) system is an indirect bedload transport monitoring device that records the acoustic signals generated by bedload particle impacts, with the goal to derive the bedload flux and grain size distribution. Particle drop experiments with quartz spheres in quiescent water in a flume setting were performed to investigate the dynamic signal response of the SPG system impacted by particle-like objects varying in size and impact location. Systematic flume experiments with natural bedload particles in flowing water were conducted to study the effects of impact angle and transport mode (saltating, rolling and sliding) on the SPG signals. For each impact caused by a single particle, the number of signal impulses, the amplitude, the positive area surrounded by the signal envelope, and the centroid frequency were extracted from the raw geophone monitoring data. The finite element method (FEM) was used to construct a virtual model of the SPG system and to determine the propagation characteristics of the numerical stress wave in the material structure. The experimental and numerical results showed a qualitative and partially quantitative agreement in the changes of the signal impulses, the amplitude, and the envelope area with increasing colliding sphere size. The centroid frequencies of the SPG vibrations showed qualitatively similar dependencies with increasing particle size as some field measurements for the coarser part of the investigated range of impact sizes. The effects of variable particle impact velocities and impact locations on the geophone plate were also investigated by drop experiments and compared to FEM simulations. In addition, the signal response for different bedload transport modes and varying impact angles were explored. In summary, the FEM simulations contribute to the understanding of the signal response of the SPG system and the findings in this study may eventually result in improving the bedload grain size classification and transport mode recognition.</p>

Limiting austenite grain size of TiN-containing steel considering the critical particle size

2007 ◽  
Vol 56 (12) ◽  
pp. 1083-1086 ◽  
Author(s):  
Joonoh Moon ◽  
Sanghoon Kim ◽  
Jongbong Lee ◽  
Changhee Lee
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Austenite Grain Size ◽  
Austenite Grain ◽  
Critical Particle Size

scholarly journals Paleolimnology of Lake Yamanaka as reflected on particle-size distribution

1970 ◽  
Vol 14 ◽  
pp. 35-42 ◽  
Author(s):  
Danda Pani Adhikari
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Size Distribution ◽  
Central Japan ◽  
Size Frequency Distribution ◽  
Factors Affecting ◽  
Mean Grain Size ◽  
The Mean ◽  
Main Factors ◽  
Lake Size

A 17.63 m long bore-hole core extracted from the deepest part of Lake Yamanaka, one of the Fuji-five Lakes at the northeasternfoot of Mount Fuji, central Japan, composed of sediment with intercalations of scoria fallout deposits. The sediment of the upper11.4 m was investigated for grain-size distribution by using a laser diffraction particle size analyser. The mean grain-size profileshowed various degrees of fluctuations, both short-and long-terms, and the size-frequency distribution revealed unimodal-trimodalmixing of sediments. Changes in lake size and water depth appear to be the main factors affecting the variability in the grain-sizedistribution and properties. The lake level appears low during 7000–5000 cal BP and 2800–1150 cal BP and relatively high during5000–2800 cal BP and 1150 cal BP– present.DOI: http://dx.doi.org/10.3126/bdg.v14i0.5437Bulletin of the Department of Geology Vol.14 2011, pp.35-42 

scholarly journals Influence of grain growth on the thermal structure of protoplanetary discs

2020 ◽  
Vol 640 ◽  
pp. A63 ◽  
Author(s):  
Sofia Savvidou ◽  
Bertram Bitsch ◽  
Michiel Lambrechts
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Grain Growth ◽  
Thermal Structure ◽  
Size Composition ◽  
Size Distributions ◽  
Migration Rates ◽  
Grain Size Distributions ◽  
Hydrodynamical Simulations ◽  
Protoplanetary Discs

The thermal structure of a protoplanetary disc is regulated by the opacity that dust grains provide. However, previous works have often considered simplified prescriptions for the dust opacity in hydrodynamical disc simulations, for example, by considering only a single particle size. In the present work, we perform 2D hydrodynamical simulations of protoplanetary discs where the opacity is self-consistently calculated for the dust population, taking into account the particle size, composition, and abundance. We first compared simulations utilizing single grain sizes to two different multi-grain size distributions at different levels of turbulence strengths, parameterized through the α-viscosity, and different gas surface densities. Assuming a single dust size leads to inaccurate calculations of the thermal structure of discs, because the grain size dominating the opacity increases with orbital radius. Overall the two grain size distributions, one limited by fragmentation only and the other determined from a more complete fragmentation-coagulation equilibrium, give comparable results for the thermal structure. We find that both grain size distributions give less steep opacity gradients that result in less steep aspect ratio gradients, in comparison to discs with only micrometer-sized dust. Moreover, in the discs with a grain size distribution, the innermost (<5 AU) outward migration region is removed and planets embedded in such discs experience lower migration rates. We also investigated the dependency of the water iceline position on the alpha-viscosity (α), the initial gas surface density (Σg,0) at 1 AU and the dust-to-gas ratio (fDG) and find rice ∝ α0.61Σg,00.8fDG0.37 independently of the distribution used in the disc. The inclusion of the feedback loop between grain growth, opacities, and disc thermodynamics allows for more self-consistent simulations of accretion discs and planet formation.

Effect of Ag addition in Sn on growth of SnTe compound during reaction between molten solder and tellurium

2010 ◽  
Vol 25 (2) ◽  
pp. 391-395 ◽  
Author(s):  
Chien-Neng Liao ◽  
Yen-Chun Huang
Keyword(s):  
Particle Size ◽  
Reaction Time ◽  
Electrical Properties ◽  
Bismuth Telluride ◽  
Molten Solder ◽  
Thermoelectric Modules ◽  
Ag Addition ◽  
Mean Particle Size ◽  
Mechanical And Electrical Properties ◽  
The Mean

SnTe is the most common compound formed at the bismuth telluride/metal soldered junction of thermoelectric modules. It affects the mechanical and electrical properties of the soldered junction. In the study we investigate the growth of SnTe compound during reaction between molten Sn–3.5Ag solder and tellurium at 250 °C. We found that the growth of SnTe is suppressed by Ag–Te bilayer compounds that block further reaction between liquid Sn and Te. With increasing reaction time, the SnTe morphology becomes rough as a result of coarsening of SnTe grains. The growth of SnTe grains follows the conservative ripening kinetics with the mean particle size proportional to one-third power of reaction time.

Sign in / Sign up

Export Citation Format

Share Document