scholarly journals A Quantitative Assessment of Microbiological Contributions to Corrosion of Candidate Nuclear Waste Package Materials

1999 ◽  
Vol 556 ◽  
Author(s):  
T. Lian ◽  
S. Martin ◽  
J. Horn ◽  
D. Jones
Keyword(s):  
Corrosion Rate ◽  
Nuclear Waste ◽  
Fold Increase ◽  
Yucca Mountain ◽  
Department Of Energy ◽  
Microbiologically Influenced Corrosion ◽  
304 Stainless Steel ◽  
Detection Methods ◽  
Nuclear Waste Repository ◽  
Waste Package

AbstractThe U.S. Department of Energy is contributing to the design of a potential nuclear waste repository at Yucca Mountain, Nevada. A system to predict the contribution of Yucca Mountain (YM) bacteria to overall corrosion rates of candidate waste package (WP) materials was designed and implemented. DC linear polarization resistance techniques were applied to candidate material coupons that had been inoculated with a mixture of YM-derived bacteria with potentially corrosive activities, or left sterile. Inoculated bacteria caused a 5- to 6-fold increase in corrosion rate of carbon steel C 1020 (to approximately 7-8μm/yr), and an almost 100-fold increase in corrosion rate of Alloy 400 (to approximately μm/yr) was observed due to microbiological activities. Microbiologically Influenced Corrosion (MIC) rates on more resistant materials (CRMs: Alloy 625, Type 304 Stainless Steel, and Alloy C22) were on the order of hundredths of micrometers per year (μm/yr). Bulk chemical and surfacial endpoint analyses of spent media and coupon surfaces showed preferential dissolution of nickel from Alloy 400 coupons and depletion of chromium from CRMs after incubation with YM bacteria. Scanning electron microscopy also showed greater damage to the Alloy 400 surface than that indicated by electrochemical detection methods.

NNWSI Performance Assessment Considerations

1983 ◽  
Vol 26 ◽  
Author(s):  
L. D. Tyler ◽  
R. R. Peters ◽  
N. K. Hayden ◽  
J. K. Johnstone ◽  
S. Sinnock
Keyword(s):  
Performance Assessment ◽  
Nuclear Waste ◽  
Yucca Mountain ◽  
Department Of Energy ◽  
Nuclear Waste Repository ◽  
Nuclear Waste Storage ◽  
Human Environment ◽  
Assessment Task ◽  
Waste Storage ◽  
A Site

ABSTRACTThe Nevada Nuclear Waste Storage Investigations (NNWSI) project includes a Performance Assessment task to evaluate the containment and isolation potential for a nuclear waste repository at Yucca Mountain in southern Nevada. This task includes calculations of the rates and concentrations at which radionuclides might be released and transported from the repository and will predict their consequences if they enter the human environment. Among the major tasks required for these calculations will be the development of models for water flow and nuclide transport under unsaturated conditions and in fractured hard rock. The program must also quantify the uncertainties associated with the results of the calculations. The performance assessment will provide evaluations needed for making major decisions as the U. S. Department of Energy seeks a site for a repository. An evaluation will be part of the environmental assessments prepared to accompany the potential nomination of the site. If the Yucca mountain site is selected for characterization and development as a repository, the assessments will be required for an environmental impact statement, a safety analysis report, and other documents.This program has been divided into five tasks. Collectively they will provide the performance assessments needed for the NNWSI Project.

scholarly journals The Proposed Yucca Mountain Repository from a Corrosion Perspective

2006 ◽  
Vol 932 ◽  
Author(s):  
Joe H. Payer
Keyword(s):  
Corrosion Resistance ◽  
Nuclear Waste ◽  
Yucca Mountain ◽  
Department Of Energy ◽  
Process Models ◽  
Localized Corrosion ◽  
Waste Package ◽  
Advanced Technologies ◽  
The U.S

ABSTRACTIn this paper, the proposed Yucca Mountain Repository is viewed from a corrosion perspective. A major component of the long-term strategy for safe disposal of nuclear waste at the Yucca Mountain Repository is first to completely isolate the radionuclides in the waste packages for long times and to greatly retard the egress and transport of radionuclides from penetrated packages. Therefore, long-lived waste packages are important. The corrosion resistance of the waste package outer canister is reviewed, and a framework for the analysis of localized corrosion processes is presented. An overview is presented of the Materials Performance targeted thrust of the U.S. Department of Energy/Office of Civilian Radioactive Waste Management's Office of Science and Technology and International. The thrust program strives for increased scientific understanding, enhanced process models and advanced technologies for corrosion control.

Integrated Analysis for Long-Term Degradation of Waste Package at the Potential Yucca Mountain Repository for High-Level Nuclear Waste Disposal

2002 ◽  
Vol 713 ◽  
Author(s):  
Joon H. Lee ◽  
Kevin G. Mon ◽  
Dennis E. Longsine ◽  
Bryan E. Bullard ◽  
Ahmed M. Moniba
Keyword(s):  
Corrosion Rate ◽  
Nuclear Waste ◽  
Yucca Mountain ◽  
Integrated Analysis ◽  
Total System ◽  
General Corrosion ◽  
Waste Package ◽  
High Level Nuclear Waste ◽  
High Level

ABSTRACTThe technical basis for Site Recommendation (SR) of the potential repository for high-level nuclear waste at Yucca Mountain, Nevada has been completed. Long-term containment of the waste and subsequent slow release of radionuclides from the engineered barrier system (EBS) into the geosphere will rely on a robust waste package (WP) design, among other EBS components as well as the natural barrier system. The WP and drip shield (DS) degradation analyses for the total system performance assessment (TSPA) baseline model for the SR have shown that, based on the current corrosion models and assumptions, both the DSs and WPs do not fail within the regulatory compliance time period (10,000 years). From the perspective of initial WP failure time, the analysis results are encouraging because the upper bounds of the baseline case are likely to represent the worst case combination of key corrosion model parameters that significantly affect long-term performance of WPs in the potential repository. The estimated long life-time of the WPs in the current analysis is attributed mostly to the following two factors that delay the onset of stress corrosion cracking (SCC): (1) the stress mitigation to substantial depths from the outer surface in the dual closure-lid weld regions; and (2) the very low general-corrosion rate applied to the closure-lid weld regions to corrode the compressive stress zones. Uncertainties are associated with the current WP SCC analysis. These are stress mitigation on the closure-lid welds, characterization of manufacturing flaws applied to SCC, and general corrosion rate applied to the closurelid weld regions. These uncertainties are expected to be reduced as additional data and analyses are developed.

Estimated Effects of Temperature-Relative Humidity Variations on the Composition of In-Drift Water in the Potential Nuclear Waste Repository at Yucca Mountain, Nevada

2004 ◽  
Vol 824 ◽  
Author(s):  
Lauren Browning ◽  
Randall Fedors ◽  
Lietai Yang ◽  
Osvaldo Pensado ◽  
Roberto Pabalan ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Nuclear Waste ◽  
Yucca Mountain ◽  
Nuclear Waste Repository ◽  
Aqueous Corrosion ◽  
Waste Package ◽  
Waste Repository ◽  
Effects Of Temperature ◽  
Drift Conditions ◽  
Simulated Time

AbstractWe define four distinct thermohydrochemical environments for drip shield and waste package corrosion in the potential nuclear waste repository, referred to here as the Dry, Seepage + Evaporation, Seepage + Condensation + Evaporation, and the Seepage + Condensation environments. These environments are bounded by temperature and relative humidity conditions at drift wall and drip shield/waste package surfaces judged most likely to initiate fundamental changes in the quantity and/or chemistry of in-drift waters. The duration in which different environments might exist is evaluated by comparing simulated, time-dependent temperature and relative humidity curves for three different locations within repository drift 25. In-drift conditions and processes postulated to cause drip shield/waste package corrosion are evaluated within the context of the thermohydrochemical environments by various means, including analytical calculations and geochemical simulations. Of the four environments considered here, the Seepage + Evaporation environment presents the most significant potential for aqueous corrosion of drip shield and waste package materials, and may persist for approximately 500 years in center drift locations. The likelihood for corrosion in other thermohydrochemical environments is significantly lower, but may increase with the acquisition of new data or the demonstration of extenuating circumstances.

Experimental Investigation of Hydrous Pyrolysis of Diesel Fuel and the Effect of Pyrolysis Products on Performance of the Candidate Nuclear Waste Repository at Yucca Mountain

1993 ◽  
Vol 333 ◽  
Author(s):  
Kenneth J. Jackson ◽  
Susan A. Carroll
Keyword(s):  
Experimental Investigation ◽  
Nuclear Waste ◽  
Diesel Fuel ◽  
Yucca Mountain ◽  
Nuclear Waste Repository ◽  
Hydrothermal Solutions ◽  
Pyrolysis Products ◽  
Analytical Technique ◽  
Hydrous Pyrolysis ◽  
Waste Repository

It is thought that a significant amount of diesel fuel and other hydrocarbon-rich phases may remain inside the candidate nuclear waste repository at Yucca Mountain after construction and subsequent emplacement of radioactive waste. Although the proposed repository horizon is above the water table, the remnant hydrocarbon phases may react with hydrothermal solutions generated by high temperature conditions that will prevail for a period of time in the repository. The preliminary experimental results of this study show that diesel fuel hydrous pyrolysis is minimal at 200°C and 70 bars. The composition of the diesel fuel remained constant throughout the experiment and the concentration of carboxylic acids in the aqueous phases was only slightly above the detection limit (1–2 ppm) of the analytical technique.

Sign in / Sign up

Export Citation Format

Share Document