Electrochemically Fabricated Conducting Polymer Nanoframework Electrode Junctions That Function as Resistive Sensors

2004 ◽  
Vol 828 ◽  
Author(s):  
Hsian-Rong Tseng ◽  
Jun Wang ◽  
Maksudul M. Alam
Keyword(s):  
Aqueous Solutions ◽  
Conducting Polymer ◽  
Electrochemical Method ◽  
Chemical Sensing ◽  
Organic Vapors ◽  
Site Specific ◽  
Ph Values ◽  
Template Free ◽  
Polymer Nanowires

ABSTRACTWe have demonstrated a template-free, site-specific, and scalable electrochemical method for the fabrication of individually addressable conducting polymer nanoframework electrode junctions in a parallel-oriented array. These conducting polymer nanoframeworks, which are composed of numerous intercrossing conducting polymer nanowires that have uniform diameters ranging from 40 to 150 nm, can be used for the chemical sensing of HCl and NH3 gases and organic vapors and for sensing pH values of aqueous solutions.

Electrical Transport and Chemical Sensing Properties of Individual Conducting Polymer Nanowires

Nano Letters ◽  
2008 ◽  
Vol 8 (12) ◽  
pp. 4653-4658 ◽  
Author(s):  
Yanyan Cao ◽  
Alexey E. Kovalev ◽  
Rui Xiao ◽  
Jaekyun Kim ◽  
Theresa S. Mayer ◽  
...  
Keyword(s):  
Conducting Polymer ◽  
Electrical Transport ◽  
Chemical Sensing ◽  
Sensing Properties ◽  
Polymer Nanowires

Template-Free Growth of Aligned Bundles of Conducting Polymer Nanowires

2009 ◽  
Vol 113 (24) ◽  
pp. 10346-10349 ◽  
Author(s):  
Yue Wang ◽  
Henry D. Tran ◽  
Richard B. Kaner
Keyword(s):  
Conducting Polymer ◽  
Template Free ◽  
Free Growth ◽  
Polymer Nanowires

scholarly journals Electrochemical bubble generation via hydrazine oxidation for the in situ control of an electrodeposited conducting polymer micro/-nanostructure

RSC Advances ◽  
2021 ◽  
Vol 11 (18) ◽  
pp. 11020-11025
Author(s):  
David Possetto ◽  
Luciana Fernández ◽  
Gabriela Marzari ◽  
Fernando Fungo
Keyword(s):  
Conducting Polymer ◽  
Electrochemical Method ◽  
Bubble Generation ◽  
Hydrazine Oxidation ◽  
In Situ Control

An electrochemical method to manipulate the size and density of electrodeposited polypyrrole structures at the micro-nanoscale by the discharge of hydrazine.

HPLC Analysis of Oxytetracycline Residues in Honey

1986 ◽  
Vol 49 (5) ◽  
pp. 383-388 ◽  
Author(s):  
PETER SPORNS ◽  
SUET KWAN ◽  
LAWRENCE A. ROTH
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Aqueous Solutions ◽  
High Performance ◽  
Hplc Analysis ◽  
Extraction Procedure ◽  
Hplc Method ◽  
Limits Of Detection ◽  
Ph Values ◽  
Double Extraction

Oxytetracycline (OTC), also known commercially as Terramycin, was determined to be more stable in honey than in buffered aqueous solutions at similar pH values and temperatures. A rapid high performance liquid chromatography (HPLC) method was developed to detect and quantitate OTC using a 1:1 dilution (wt/wt) of honey samples in water. Using 355 nm as the wavelength of detection, amounts as low as 0.5 μg/ml could be detected in the above solution. The limits of detection were lowered considerably by a double extraction procedure.

scholarly journals Kinetics of thiamin cleavage by sulphite

1969 ◽  
Vol 113 (4) ◽  
pp. 611-615 ◽  
Author(s):  
J. Leichter ◽  
M. A. Joslyn
Keyword(s):  
Aqueous Solutions ◽  
Rate Constant ◽  
Sulphur Dioxide ◽  
First Order ◽  
Ph Values ◽  
Rate Of Reaction ◽  
Kinetics Of

Results are presented on the rate of thiamin cleavage by sulphite in aqueous solutions as affected by temperature (20–70°), pH(2·5–7·0), and variation of the concentration of either thiamin (1–20μm) or sulphite (10–5000μm as sulphur dioxide). Plots of the logarithm of percentage of residual thiamin against time were found to be linear and cleavage thus was first-order with respect to thiamin. At pH5 the rate was also found to be proportional to the sulphite concentration. In the pH region 2·5–7·0 at 25° the rate constant was 50m−1hr.−1 at pH5·5–6·0, and decreased at higher or lower pH values. The rate of reaction increased between 20° and 70°, indicating a heat of activation of 13·6kcal./mole.

Removal of Dyes from Aqueous Solutions by Adsorption on Chrome-Tanned Solid Wastes Generated in the Leather Industry

2003 ◽  
Vol 38 (2) ◽  
pp. 393-411 ◽  
Author(s):  
Soufiane Tahiri ◽  
Ali Messaoudi ◽  
Abderrahman Albizane ◽  
Mohamed Azzi ◽  
Mohamed Bouhria ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Operating Conditions ◽  
Solid Wastes ◽  
Cationic Dyes ◽  
Optimum Operating ◽  
Leather Industry ◽  
Anionic Dyes ◽  
Ph Values ◽  
Acidic Conditions ◽  
Dyes Adsorption

Abstract In this work, the ability of chrome shavings and of crust leather buffing dusts to remove dyes from aqueous solutions has been studied. Buffing dusts proved to be a much better adsorbent than chrome shavings for cationic dyes. The adsorption of anionic dyes is very important on two studied wastes. The pH has an obvious influence on the adsorption of dyes. Adsorption of cationic dyes is less favourable under acidic conditions (pH <3.5) and at high pH values (pH >10.5). The adsorption of anionic dyes on both adsorbents is more favourable under acidic conditions (pH <3). The adsorption on chrome shavings is improved by the use of finer particles. The kinetic adsorption was also studied. Adsorption isotherms, at the optimum operating conditions, were determined. Adsorption follows the Langmuir model. The isotherm parameters have been calculated. The column technique could be applied to treat significant volumes of solutions.

Sign in / Sign up

Export Citation Format

Share Document