Helical Rosette Nanotubes as a Potentially More Effective Orthopaedic Implant Material

2004 ◽  
Vol 845 ◽  
Author(s):  
Ai Lin Chun ◽  
Hicham Fenniri ◽  
Thomas J. Webster
Keyword(s):  
Tissue Engineering ◽  
Surface Roughness ◽  
Bone Cells ◽  
In Vitro Study ◽  
Orthopaedic Implant ◽  
Rosette Nanotubes ◽  
Osteoblast Adhesion ◽  
Organic Nanotubes ◽  
First Time

ABSTRACTOrganic nanotubes called helical rosette nanotubes (HRN) have been synthesized in this study for bone tissue engineering applications. They possess intriguing properties for various bionanotechnology applications since they can be designed to mimic the nanostructured constituent components in bone such as collagen fibers and hydroxyapatite (Ca5(PO4)3(OH)) which bone cells are naturally accustomed to interacting with. This is in contrast to currently used orthopaedic materials such as titanium which do not possess desirable nanometer surface roughness. The objective of this in vitro study was to determine bone-forming cell (osteoblasts) interactions on titanium coated with HRNs. Results of this study showed for the first time increased osteoblast adhesion on titanium coated with HRNs compared to those not coated with HRNs. In this manner, this study provided evidence that HRNs should be further considered for orthopaedic applications.

scholarly journals SEM Analysis of Enamel Abrasion after Air Polishing Treatment with Erythritol, Glycine and Sodium Bicarbonate

Coatings ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 549 ◽  
Author(s):  
Bruna Sinjari ◽  
Gianmaria D’Addazio ◽  
Martina Bozzi ◽  
Manlio Santilli ◽  
Tonino Traini ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Sodium Bicarbonate ◽  
Air Flow ◽  
Dental Enamel ◽  
In Vitro Study ◽  
Sem Analysis ◽  
Medical Systems ◽  
Air Polishing ◽  
And Control

The aim of this in vitro study was to evaluate the enamel surface topography after treatment with three air polishing powders: Glycine (A), erythritol (B), and sodium bicarbonate (C) (Air Flow Soft, Plus and Classic powders, EMS Electro Medical Systems S.A., Nyon, Switzerland). Fifteen extracted incisors were randomly divided into three groups of five teeth each, A, B and C, respectively. The teeth were blocked in plaster bases, washed, dried and half-covered with polytetrafluoroethylene strips before treatment. In this way, each half-treated dental element became test and control of itself. Comparative statistical analysis of Rq (geometric average of the deviations occurring in roughness profile) was performed. The scanning electron microscope (SEM) analysis showed different degrees of surface roughness between the groups, decreasing after treatment. In addition, a statistically significant reduction p < 0.05 was present in group C (Rq mean non-treated 108.17 µm, 95% CI: 97.29–124.01 and Rq mean treated 86.78 µm, 95% CI: 80.63–93.70). A decrease in surface roughness post-treatment was not observed in group A and B. Therefore, it may be concluded that the air flow powders tested herein can be used on dental enamel to reduce the surface roughness due to function and the action of dental therapies.

Novel Anti-Cancer, Anti-Bacterial Coatings for Biomaterial Applications: Selenium Nanoclusters

2009 ◽  
Vol 1209 ◽  
Author(s):  
Phong Anh Tran ◽  
Erik Taylor ◽  
Love Sarin ◽  
Robert H. Hurt ◽  
Thomas J Webster
Keyword(s):  
Bone Cells ◽  
Tumor Resection ◽  
Active Agent ◽  
In Vitro Study ◽  
Biologically Active ◽  
Elemental Selenium ◽  
Orthopedic Implant ◽  
Functional Coating ◽  
Anti Cancer

AbstractTwo common problems with implantation after cancerous tumor resection are cancer recurrence and bacteria infection at the implant site. Tumor resection surgery sometimes can not remove all the cancerous cells, thus, cancer can return after implantation. In addition, bacteria infection is one of the leading causes of implant failure. Therefore, it is desirable to have anti-cancer and anti-bacterial molecules which both rapidly (for anti-infection purposes) and continuously (for anti-cancer purposes) are available at the implant site following implantation. Therefore, the objective of the present in vitro study was to create a multi-functional coating for anti-cancer and anti-bacterial orthopedic implant applications. Elemental selenium was chosen as the biologically active agent in this effort because of its known chemopreventive and anti-bacterial properties. To achieve that objective, titanium (Ti), a conventional orthopedic implant material was coated with selenium (Se) nanoclusters. Different coating densities were achieved by varying Se concentration in the reaction mixture. Titanium substrates coated with Se nanoclusters were shown to enhance healthy osteoblast (bone-forming cell) and inhibit cancerous osteoblast proliferation in co-culture experiments. Functions of S. epidermidis (one of the leading bacteria that infect implants) were inhibited on Ti coated with Se-nanoclusters compared to uncoated materials. Thus, this study provided for the first time a coating material (selenium nanoclusters) to the biomaterials’ community to promote healthy bone cells’ functions, inhibit cancer growth and prevent bacteria infection.

scholarly journals The behaviour of composites, glass ionomers and compomers in erosive conditions – in vitro study

2014 ◽  
Vol 60 (5) ◽  
pp. 200-203
Author(s):  
Andreea Borş ◽  
Cristina Molnar-Varlam ◽  
Melinda Székely
Keyword(s):  
Surface Roughness ◽  
Wear Resistance ◽  
Erosive Wear ◽  
In Vitro Study ◽  
Vitro Study ◽  
Initial Surface ◽  
Dental Filling ◽  
Filling Materials ◽  
Restorative Materials

Abstract Objective: The aim of this in vitro study was to evaluate the influence of erosive conditions on the wear resistance of aesthetic direct restorative materials. Methods: Six dental filling materials were tested: two composites (Filtek Z550 and X-tra fil), two compomers (Dyract Extra and Twinky Star) and two glass ionomers (Ketac Molar and Fuji II LC). Twenty disks (10mm×2mm) of each material were prepared (n=120) and kept in artificial saliva at 37˚C for 24 hours. Specimens were cycled in acidic soft drink (Coca-Cola) 5×/day, for 5’, over 30 days. Initial surface roughness ISR (Ra-μm) and final surface roughness FSR were measured using a profilometer. The wear rate was calculated as difference of final minus the initial roughness (ΔSR=FSR-ISR). For statistical analysis t-test and one-way ANOVA test were used by GraphPad Prism version 5.03 statistical software. The level of significance was set at p<0.05. Results: The erosive wear rates (mean±SD, μm) after exposure to acidic beverage were: 0.30±0.03 (Ketac Molar), 0.28±0.04 (Fuji II LC), 0.27±0.00 (Filtek Z550), 0.23±0.01 (X-tra fil), 0.20±0.00 (Twinky Star) and 0.14±0.01 Dyract Extra, respectively. There were significant differences between the tested materials (p<0.05). Conclusions: Dental filling materials had different behaviour under the same erosive condition, however all investigated aesthetic restorative materials showed surface degradation. These findings suggest that erosive wear resistance of tooth coloured restoratives could influence their longevity in intraoral acidic conditions. Acknowledgements: The study was supported by the Internal Research Grant no. 5/30.01.2013 of the University of Medicine and Pharmacy of Tirgu Mureş.

scholarly journals In Vitro Characterization of Immune-Related Properties of Human Fetal Bone Cells for Potential Tissue Engineering Applications

2009 ◽  
Vol 15 (7) ◽  
pp. 1523-1532 ◽  
Author(s):  
Marc-Olivier Montjovent ◽  
Chiara Bocelli-Tyndall ◽  
Corinne Scaletta ◽  
Arnaud Scherberich ◽  
Silke Mark ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Cells ◽  
Engineering Applications ◽  
Fetal Bone ◽  
In Vitro Characterization

TRENDS AND CHALLENGES OF CARTILAGE TISSUE ENGINEERING

2009 ◽  
Vol 21 (03) ◽  
pp. 149-155 ◽  
Author(s):  
Hsu-Wei Fang
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Growth Factors ◽  
Bone Cells ◽  
Cartilage Tissue Engineering ◽  
Bioactive Molecules ◽  
In Vivo Studies ◽  
Cartilage Tissue

Cartilage injuries may be caused by trauma, biomechanical imbalance, or degenerative changes of joint. Unfortunately, cartilage has limited capability to spontaneous repair once damaged and may lead to progressive damage and degeneration. Cartilage tissue-engineering techniques have emerged as the potential clinical strategies. An ideal tissue-engineering approach to cartilage repair should offer good integration into both the host cartilage and the subchondral bone. Cells, scaffolds, and growth factors make up the tissue engineering triad. One of the major challenges for cartilage tissue engineering is cell source and cell numbers. Due to the limitations of proliferation for mature chondrocytes, current studies have alternated to use stem cells as a potential source. In the recent years, a lot of novel biomaterials has been continuously developed and investigated in various in vitro and in vivo studies for cartilage tissue engineering. Moreover, stimulatory factors such as bioactive molecules have been explored to induce or enhance cartilage formation. Growth factors and other additives could be added into culture media in vitro, transferred into cells, or incorporated into scaffolds for in vivo delivery to promote cellular differentiation and tissue regeneration.Based on the current development of cartilage tissue engineering, there exist challenges to overcome. How to manipulate the interactions between cells, scaffold, and signals to achieve the moderation of implanted composite differentiate into moderate stem cells to differentiate into hyaline cartilage to perform the optimum physiological and biomechanical functions without negative side effects remains the target to pursue.

Sign in / Sign up

Export Citation Format

Share Document