scholarly journals Size dependent melting of Silicon nanoparticles

2014 ◽  
Vol 24 (3) ◽  
pp. 207 ◽  
Author(s):  
Nguyen Thi Thuy Hang

Melting of crystalline silicon nanoparticles is studied by molecular dynamics (MD) simulations using Stillinger-Weber potential. Models are heated up from a crystalline to a normal liquid state. Temperature dependence of total energy and the Lindemann ratio exhibit a first-order-like behavior of the transition at the melting point. Heat capacity of the system presents a single peak at around the melting point. The size dependent melting is presented. As the size of the nanoparticles increases, the variation of the melting point becomes more monotonic and the temperature range of bistability shifts to higher temperatures. In large nanoparticles, the proportion of interior atoms increases and the average potential energy per atom converges to the bulk or thin films.

1996 ◽  
Vol 446 ◽  
Author(s):  
Martina E. Bachlechner ◽  
Ingvar Ebbsjö ◽  
Rajiv K. Kalia ◽  
Priya Vashishta

AbstractStructural correlations at the Si(111)/Si3N4(0001) interface are studied using the molecular dynamics (MD) method. In the bulk, Si is described by the Stillinger-Weber potential and Si3N4 by an interaction potential which contains two-body (steric, Coulomb, electronic polarizabilities) and three-body (bond bending and stretching) terms. At the interface, the charge transfer from silicon to nitrogen is taken from LCAO electronic structure calculations. Using these Si, Si3N4 and interface interactions in MD simulations, the interface structure (atomic positions, bond lengths, and bond angles) is determined. Results for fracture in silicon are also presented.


2012 ◽  
Vol 100 (7) ◽  
pp. 072403 ◽  
Author(s):  
F. X. Hu ◽  
L. Chen ◽  
J. Wang ◽  
L. F. Bao ◽  
J. R. Sun ◽  
...  

2021 ◽  
Author(s):  
Josip Lovrić ◽  
Xiangrui Kong ◽  
Sofia M. Johansson ◽  
Erik S. Thomson ◽  
Jan B. C. Pettersson

<p>The detailed description of organic aerosols surfaces in the atmosphere remains an open issue, which limits our ability to understand and predict environmental change. Important research questions concern the hydrophobic/hydrophilic character of fresh and aged aerosols and the related influence on water uptake in solid, liquid as well in intermediate state.  Also, surface characterization remains big challenge but we find it reachable by conjunction of Molecular Dynamics (MD) simulations and the environmental molecular beam (EMB) experimental method.  A  picture of the detailed molecular-level behavior of water molecules on organic surfaces is beginning to rise based on detailed experimental and theoretical studies; one example is a recent study that investigates water interactions with solid and liquid n-butanol near the melting point [1], another example focus on interaction of water with solid nopinone [2]. From the other side, in order to characterize surface properties during and before melting we employ MD simulations of n-butanol, nopinone and valeric acid. Nopinone (C<sub>9</sub>H<sub>14</sub>O) is a reaction product formed during oxidation of β-pinene and has been found in both the gas and particle phases of atmospheric aerosol. n-butanol (C<sub>4</sub>H<sub>9</sub>OH) is primary alcohol, naturally occurs scarcely and here serves as good representative for alcohols. In the same way valeric acid (CH<sub>3</sub>(CH<sub>2</sub>)<sub>3</sub>COOH) serves as a good representative for a family of carboxylic acids. Valeric acid is, as n-butanol, straight-chain molecule. We show that a classical force field for organic material is able to model crystal and liquid structures. The surface properties near the melting point of the condensed phase are reported, and the hydrophobic and hydrophilic character of the surface layer is discussed.  Overall surface melting dynamic is presented and quantified in the terms of structural and geometrical properties. Mixing of a methanol with the solid nopinone surface is examined and hereby presented.</p><p><strong>References</strong></p><p>[1] Johansson, S. M., Lovrić, J., Kong, X., Thomson, E. S., Papagiannakopoulos, P., Briquez, S., Toubin, C, Pettersson, J. B. C. (2019). Understanding water interactions with organic surfaces: environmental molecular beam and molecular dynamics studies of the water–butanol system. Physical Chemistry Chemical Physics. https://doi.org/10.1039/C8CP04151B   </p><p>[2] Johansson, S. M., Lovrić, J., Kong, X., Thomson, E. S., Hallquist, M., & Pettersson, J. B. C. (2020). Experimental and Computational Study of Molecular Water Interactions with Condensed Nopinone Surfaces Under Atmospherically Relevant Conditions. The Journal of Physical Chemistry A, acs.jpca.9b10970. https://doi.org/10.1021/acs.jpca.9b10970</p><p>Keywords: Molecular Dynamics, organic crystal, organic aerosols, water uptake, surface procesess, molecular level</p>


2021 ◽  
Author(s):  
Yubing Liu ◽  
Kuan Lu ◽  
Xingchen Liu ◽  
Jinjia Liu ◽  
Wenping Guo ◽  
...  

The first-order phase transition plays a pivotal role in material behaviors, yet that of carbides, a type of important materials, has not been systematically studied. Herein, the melting process and...


2019 ◽  
Vol 53 (7) ◽  
pp. 947-953 ◽  
Author(s):  
I. V. Talyzin ◽  
M. V. Samsonov ◽  
V. M. Samsonov ◽  
M. Yu. Pushkar ◽  
V. V. Dronnikov

1956 ◽  
Vol 34 (9) ◽  
pp. 1243-1248 ◽  
Author(s):  
D. W. Davidson

With isopentane as the dilatometric liquid, CH3OD was examined between 120 °K. and the melting point. There is evidence of two transitions within the solid: one, in the vicinity of 158 °K., appears to be a gradual transition, the other, at 163 °K., a first-order one. The corresponding molar volume changes are 0.04 and 0.43 ml. A further change of volume of 2.67 ml./mole occurs at the melting point. These results are compared with recent dilatometric results for CH3OH and discussed with reference to the available calorimetric data. The molar volume of CH3OD is slightly greater than that of CH3OH in both liquid and solid forms.


1976 ◽  
Vol 61 (2) ◽  
pp. 177-183 ◽  
Author(s):  
C.P. Girijavallabhan ◽  
S. Sasidharan Nair ◽  
K. Babu Joseph

2012 ◽  
Vol 48 (3) ◽  
pp. 419-425 ◽  
Author(s):  
J. Sopousek ◽  
J. Vrestal ◽  
A. Zemanova ◽  
J. Bursi

SnAg nanoparticles (SnAg NPs) were prepared by wet synthesis. The chemical composition of the SnAg NPs was obtained by inductively coupled plasma - mass spectrometry. The prepared fine powder samples were characterized by electron microscopic technique (SEM) and thermal analysis (DSC). The nanoparticles with different size were obtained. The size dependent melting point depression (MPD) of the SnAg NPs was determined experimentally. The size dependent phase diagram of the SnAg alloy was also calculated using CALPHAD method, which has been extended to describe the surface energy of SnAg nanoparticles. The same approach was used for SnAg eutectic MPD calculations. The own experimental and theoretical results were compared with the data of the other authors. The satisfactory agreement was found.


Author(s):  
Asegun S. Henry ◽  
Gang Chen

Silicon's material properties, have been studied extensively because of its technological significance in a variety of industries, including microelectronics. Yet, questions surrounding the phonon relaxation times in silicon continue to linger.1,2 Previous theoretical works3-5 have generated qualitative expressions for phonon relaxation times, however these approaches require fitting parameters that cannot be determined reliably. This paper first discusses implementation issues associated with using the Green-Kubo method in molecular dynamics (MD) simulations. We compare various techniques used in similar works and discusses several implementation issues that have arisen in the literature. We then describe an alternative procedure for analyzing the normal modes of a crystal to extract phonon relaxation times. As an example material we study bulk crystalline silicon using equilibrium MD simulations and lattice dynamics. The environment dependent interatomic potential6 is used to model the interactions and frequency dependent phonon properties are extracted from the MD simulations.


2003 ◽  
Vol 82 (1) ◽  
pp. 225-227 ◽  
Author(s):  
Q Jiang ◽  
S Zhang ◽  
M Zhao

Sign in / Sign up

Export Citation Format

Share Document