scholarly journals Bioelectricity generation in annulus structure of single chamber membrane-less microbial fuel cell using wastewater from chocolate industry

2017 ◽  
Author(s):  
Ghasem Najafpour ◽  
Parisa Nouri ◽  
Mostafa Rahimnejad
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Proton Exchange ◽  
Anaerobic Sludge ◽  
Carbon Cloth ◽  
Efficient System ◽  
Single Chamber ◽  
Chocolate Industry

Microbial Fuel Cell (MFC) is an efficient system for generating low power where wastewater is substrate for the biocatalyst. In this work, Annular Single Chamber Microbial Fuel Cell (ASCMFC) with spiral anode was fabricated and tested. Carbon cloth and stainless steel 400 meshes were selected as cathode and anode electrodes, respectively. In order to enhance the conductivity of anode, the graphite coating was applied. A 40% platinum as catalyst was used on carbon based cathode in MFC. The carbon cloth was coated with 5% Nafion solution. In fact Nafion acts as Proton Exchange Membrane (PEM) in the fabricated MFC. For the first time, wastewater of Chocolate industry with COD 1400 mg/L was used as substrate in anode compartment. Also a mixture of anaerobic sludge from wastewater treatment plant (Qaem-Shahr, Iran) was introduced into MFC. Maximum voltage obtained in the ASCMFC system was 792 mV in an open-circuit mode. Also, Fabricated MFC operating at 30 ◦C, the maximum achieved power density using an external resistance of 500Ω was about 4.8 W/m3. The upshots from single chamber MFC were compared to dual chamber MFC. The findings demonstrate that, due to the generated high power density and voltage by the cell, the ASCMFC has a great potential for COD removal and wastewater treatment.

scholarly journals Using Shewanella Oneidensis MR1 as a Biocatalyst in a Microscale Microbial Fuel Cell

2013 ◽  
Author(s):  
Jie Yang ◽  
Sasan Ghobadian ◽  
Reza Montazami ◽  
Nastaran Hashemi
Keyword(s):  
Power Generation ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Microbial Fuel Cells ◽  
Shewanella Oneidensis ◽  
Proton Exchange ◽  
Carbon Cloth ◽  
Anode Chamber

Microbial fuel cell (MFC) technology is a promising area in the field of renewable energy because of their capability to use the energy contained in wastewater, which has been previously an untapped source of power. Microscale MFCs are desirable for their small footprints, relatively high power density, fast start-up, and environmentally-friendly process. Microbial fuel cells employ microorganisms as the biocatalysts instead of metal catalysts, which are widely applied in conventional fuel cells. MFCs are capable of generating electricity as long as nutrition is provided. Miniature MFCs have faster power generation recovery than macroscale MFCs. Additionally, since power generation density is affected by the surface-to-volume ratio, miniature MFCs can facilitate higher power density. We have designed and fabricated a microscale microbial fuel cell with a volume of 4 μL in a polydimethylsiloxane (PDMS) chamber. The anode and cathode chambers were separated by a proton exchange membrane. Carbon cloth was used for both the anode and the cathode. Shewanella Oneidensis MR-1 was chosen to be the electrogenic bacteria and was inoculated into the anode chamber. We employed Ferricyanide as the catholyte and introduced it into the cathode chamber with a constant flow rate of approximately 50 μL/hr. We used trypticase soy broth as the bacterial nutrition and added it into the anode chamber approximately every 15 hours once current dropped to base current. Using our miniature MFC, we were able to generate a maximum current of 4.62 μA.

Studies on Power Generation and Wastewater Treatment Using Modified Single Chamber Microbial Fuel Cell

2015 ◽  
Vol 1113 ◽  
pp. 823-827 ◽  
Author(s):  
Nik Mahmood Nik Azmi ◽  
Nazlee Faisal Ghazali ◽  
Ahmad Fikri ◽  
Md Abbas Ali
Keyword(s):  
Power Generation ◽  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Mixed Culture ◽  
Power Density ◽  
Oxygen Demand ◽  
Wastewater Sample ◽  
Single Chamber ◽  
Wastewater Samples

A membrane-less and mediator-less system was designed and tested with wastewater sample as fuel to generate electricity. Microorganisms were first isolated from the wastewater sample to pure culture and were used as the ‘machinery’ that converts wastewater into energy. The wastewater samples were treated either by sterilization or non-sterilization methods. These tests were run using a modified air-cathode single chamber microbial fuel cell (MFC). By sterilizing the wastewater, the calculated power density was much lower compared to non-sterilized wastewater indicating a significant role of microbial activity in the SCMFC system and substrate availability. Furthermore, mixed culture was observed to give larger power density compared to an individual microbe (18.42 ± 5.84 mW/m2 for mixed culture and 8.82 ± 4.56 mW/m2 to 9.46 ± 4.87 mW/m2 for individual microbe, Bukholderi capecia and Acidovorax sp. respectively) to prove that larger power value could be achieved with a mixed microbial system. In addition, the system proved to remove 68.57% of chemical oxygen demand (COD) of the wastewater sample tested. In conclusion, the designed SCMFC has been proven capable of power generation and wastewater treatment comparable to other SCMFCs to date.

A single chamber packed bed microbial fuel cell biosensor for measuring organic content of wastewater

2009 ◽  
Vol 60 (11) ◽  
pp. 2879-2887 ◽  
Author(s):  
Mirella Di Lorenzo ◽  
Tom P. Curtis ◽  
Ian M. Head ◽  
Sharon B. Velasquez-Orta ◽  
Keith Scott
Keyword(s):  
Fuel Cell ◽  
Surface Area ◽  
Microbial Fuel Cell ◽  
Packed Bed ◽  
Organic Content ◽  
Anode Surface ◽  
Carbon Cloth ◽  
Single Chamber ◽  
Steady State Current ◽  
Bed Thickness

This study reports an investigation of the effect of the anode surface area on the performance of a single chamber microbial fuel cell (SCMFC) based biosensor for measuring the organic content of wastewater. A packed bed of graphite granules was used as the anode. The surface area of the anode was changed by altering the granule bed thickness (0.3 cm and 1 cm). The anode surface area was found to play a role in the dynamic response of the system. For a granule bed thickness of 1 cm and with an external resistance of 500 Ω, the response time (defined as the time required to achieve 95% of the steady-state current) was reduced by approximately 65% in comparison to a SCMFC biosensor with a carbon cloth anode.

Production of Electricity during Wastewater Treatment Using a Single Chamber Microbial Fuel Cell

2004 ◽  
Vol 38 (7) ◽  
pp. 2281-2285 ◽  
Author(s):  
Hong Liu ◽  
Ramanathan Ramnarayanan ◽  
Bruce E. Logan
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Single Chamber

scholarly journals High Electric Production by Membraneless Microbial Fuel Cell with Up Flow Operation Using Acetate Wastewater

2020 ◽  
Vol 11 (2) ◽  
pp. 19-27
Author(s):  
Aris Mukimin ◽  
Nur Zen ◽  
Hanny Vistanty ◽  
Purwanto Agus
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Oxygen Demand ◽  
Gas Diffusion ◽  
Synthetic Wastewater ◽  
Anaerobic Sludge ◽  
Carbon Cloth ◽  
Current Response ◽  
Current Voltage ◽  
Anaerobic Chamber

Microbial fuel cell (MFC) is a new proposed technology reported to generate renewable energy while simultaneously treating wastewater. Membraneless microbial fuel cell (ML-MFC) system was developed to eliminate the requirement of membrane which is expensive and prone to clogging while enhancing electricity generation and wastewater treatment efficiency. For this purpose, a reactor was designed in two chambers and connected via three pipes (1 cm in diameter) to enhance fluid diffusion. Influent flowrate was maintained by adjusting peristaltic pump at the base of anaerobic chamber. Carbon cloth (235 cm2) was used as anode and paired with gas diffusion layer (GDL) carbon-Pt as cathode. Anaerobic sludge was filtered and used as starter feed for the anaerobic chamber. The experiment was carried out by feeding synthetic wastewater to anaerobic chamber; while current response and potential were recorded. Performance of reactor was evaluated in terms of chemical oxygen demand (COD). Electroactive microbe was inoculated from anaerobic sludge and showed current response (0.55-0.65 mA) at 0,35 V, range of diameter 1.5-2 µm. The result of microscopics can showed three different species. The microbial performance was increased by adding ferric oxide 1 mM addition as acceptor electron. The reactor was able to generate current, voltage, and electricity power of 0.36 mA, 110 mV, and 40 mWatt (1.5 Watt/m2), respectively, while reaching COD removal and maximum coulomb efficiency (EC) of 16% and 10.18%, respectively.

Sign in / Sign up

Export Citation Format

Share Document