scholarly journals Evaluation of Drought Tolerance Indices for Screening Some of Corn (Zea mays L.) Cultivars under Environmental Conditions

2013 ◽  
Vol 5 (3) ◽  
pp. 388-393 ◽  
Author(s):  
Mohhamad Reza NAGHAVI ◽  
Alireza POUR ABOUGHADAREH ◽  
Marouf KHALILI
Keyword(s):  
Zea Mays ◽  
Drought Tolerance ◽  
Stress Tolerance ◽  
Zea Mays L ◽  
Stress Conditions ◽  
Tolerance Index ◽  
Drought Tolerant ◽  
Drought Tolerance Indices ◽  
Stress Susceptibility ◽  
Tolerance Indices

In order to study the effect of drought stress on eight cultivars corn (Zea mays L.), an experiment was conducted in a factorial experimental on the basis of randomized complete block design under two irrigated conditions during 2010-2011 cropping season. Twelve drought tolerance/resistance indices including stress tolerance index (STI), stress susceptibility index (SSI), tolerance index (TOL), geometric mean production (GMP), mean production (MP), yield index (YI), yield stability index (YSI), drought resistance index (DI), relative drought index (RDI), stress susceptibility percentage index (SSPI) and modified stress tolerance (K1STI and K2STI) were calculated based on grain yield under drought and irrigated conditions. Yield in stress and non-stress conditions were significantly and positively correlated with STI, GMP, MP, YI, TOL, DI, RDI, YSI, SSPI, K1STI, and K2STI and negatively correlated with SSI. Yield in stress and non-stress conditions were significantly and positively correlated with STI, GMP, MP, YI, TOL, DI, RDI, YSI, SSPI, K1STI, and K2STI and negatively correlated with SSI. Screening drought tolerant cultivars using ranking method, three dimensional plots discriminated cultivars ‘KSC720’, KSC 710GT and ‘KSC 700’ as the most drought tolerant. Cluster analysis classified the cultivars into three groups i.e., tolerant, susceptible and semi-susceptible to drought conditions. In general, Results of this study showed that among drought tolerance indices STI, YI, SSPI, K1STI, and K2STI can be used as the most suitable indicators for screening drought tolerant cultivars and ‘KSC720’, KSC 710 GT and ‘KSC 700’ had the highest tolerance to drought in our studies condition.

scholarly journals Evaluation of drought tolerance in corn (Zea mays L.) new hybrids with using stress tolerance indices

2012 ◽  
Vol 1 (3) ◽  
pp. 543 ◽  
Author(s):  
H. Moradi ◽  
G A. Akbari ◽  
S. Khavari Khorasani ◽  
H A. Ramshini
Keyword(s):  
Drought Stress ◽  
Drought Tolerance ◽  
Stress Tolerance ◽  
Block Design ◽  
Geometric Mean ◽  
Weather Condition ◽  
Tolerance Index ◽  
Drought Tolerance Indices ◽  
Stress Susceptibility ◽  
Tolerance Indices

In order to study the effect of drought stress on morphophysiologic characteristics,yield and yield components of 8 new hybrids of corn (Zea maize L.) and KSC704commercial hybrid as control resistant to drought and warm (which were bred andscreened in Khozestan province condition), an experiment was conducted in aRandomized Complete Block Design (RCBD) with three replications underdrought stress and normal irrigation at Khorasan-Razavi Agriculture ResearchCenter, Mashhad, Iran on June 10, 2011. The results of analyze variance showedthat under normal irrigation and drought condition, there was a significantdifference (p<0.01) between the hybrids. Mean comparison of hybrids revealedthat in normal irrigation H6 and in drought stress H8 hybrid had the maximumgrain yield (12.85 and 6.75 ton/ha, respectively). Based on the grain yields ofstudied hybrids, stress tolerance index (STI), stress susceptibility index (SSI),tolerance index (TOI), mean productivity (MP), geometric mean productivity(GMP), harmonic mean (HM) and golden mean (GM) were estimated. Resultsshowed that among drought tolerance indices, MP, GMP, STI and HM were thebest indices for corn and KSC704 hybrid and H4 had the highest tolerance todrought in Mashhad weather condition.

scholarly journals Canopy Temperature and Chlorophyll Content are Effective Measures of Drought Stress Tolerance in Durum Wheat

2018 ◽  
Vol 10 (4) ◽  
pp. 575-583 ◽  
Author(s):  
Fereshteh JOKAR ◽  
Rahmatollah KARIMIZADEH ◽  
Asad MASOUMIASL ◽  
Reza AMIRI FAHLIANI
Keyword(s):  
Drought Tolerance ◽  
Durum Wheat ◽  
Stress Tolerance ◽  
Chlorophyll Content ◽  
Geometric Mean ◽  
Canopy Temperature ◽  
Stress Conditions ◽  
Tolerance Index ◽  
Wheat Varieties ◽  
Drought Tolerant

Durum wheat (Triticum durum L.) is used for the preparation of multiple food products, including pasta and bread. Its production is restricted due to diverse environmental stresses i.e. drought and heat stress. Here, comparative analysis of durum wheat varieties was done by studying canopy temperature depression (CTD) and chlorophyll content (CHL), yield and yield contributing traits to evaluate their performance under stress and low stress conditions. Twelve durum wheat genotypes were studied under stressful and low-stress conditions in Gachsaran region of Iran. CTD and CHL were measured at two stages, from the emergence of fifty percent of inflorescence (ZGS 54) to watery ripe stage (ZGS 71). According to stress tolerance index (STI), mean productivity (MP) and geometric mean productivity (GMP) indices, genotype G10 exhibited the most, while genotype G6, the least relative tolerance, respectively. Based on MP and GMP, genotype G10 was found to be drought tolerant, while genotype G2 displayed the lowest amount of MP and GMP. Therefore these genotypes are recommended to be used as genitors in artificial hybridization for improvement of drought tolerance in other cultivars. All indices had high correlation with grain yield under stress and non-stress condition, indicating more suitability of these indices for selection of resistant genotype. Results of the present study showed that among drought tolerance indices, harmonic mean (HM), GMP, CTD and modified STI index (K2STI) can be used as the most suitable indicators for screening drought tolerant cultivars.

scholarly journals Physiological Screening for Drought Tolerance Traits in Vegetable Amaranth (Amaranthus tricolor) Germplasm

Agriculture ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 994
Author(s):  
Norain Jamalluddin ◽  
Festo J. Massawe ◽  
Sean Mayes ◽  
Wai Kuan Ho ◽  
Ajit Singh ◽  
...  
Keyword(s):  
Drought Stress ◽  
Drought Tolerance ◽  
Geometric Mean ◽  
Tolerance Index ◽  
Genotypic Differences ◽  
Amaranthus Tricolor ◽  
Drought Tolerant ◽  
Drought Tolerance Indices ◽  
Tolerance Indices ◽  
Screening Trials

Amaranth (Amaranthus tricolor), an underutilized climate smart crop, is highly nutritious and possesses diverse drought tolerance traits, making it an ideal crop to thrive in a rapidly changing climate. Despite considerable studies on the growth and physiology of plants subjected to drought stress, a precise trait phenotyping strategy for drought tolerance in vegetable amaranth is still not well documented. In this study, two drought screening trials were carried out on 44 A. tricolor accessions in order to identify potential drought-tolerant A. tricolor germplasm and to discern their physiological responses to drought stress. The findings revealed that a change in stem biomass was most likely the main mechanism of drought adaptation for stress recovery, and dark-adapted quantum yield (Fv/Fm) could be a useful parameter for identifying drought tolerance in amaranth. Three drought tolerance indices: geometric mean productivity (GMP), mean productivity (MP) and stress tolerance index (STI) identified eight drought-tolerant accessions with stable performance across the two screening trials. The highly significant genotypic differences observed in several physiological traits among the amaranth accessions indicate that the amaranth panel used in this study could be a rich source of genetic diversity for breeding purposes for drought tolerance traits.

scholarly journals Evaluation of a Hexaploid Wheat Collection (Triticum aestivum L.) under Drought Stress Conditions Using Stress Tolerance Indices

2020 ◽  
pp. 1-10
Author(s):  
Alireza Daneshvar Hosseini ◽  
Ali Dadkhodaie ◽  
Bahram Heidari ◽  
Seyed Abdolreza Kazemeini
Keyword(s):  
Drought Stress ◽  
Grain Yield ◽  
Stress Tolerance ◽  
Geometric Mean ◽  
Triticum Aestivum L ◽  
Stress Conditions ◽  
Tolerance Index ◽  
Highly Correlated ◽  
Drought Tolerance Indices ◽  
Tolerance Indices

Wheat is the most important crop in the world which faces the global problem of drought. Its production is affected by water deficit after pollination in arid and semi-arid regions. An experiment was conducted to assess tolerance of 39 bread wheat genotypes to end-season drought. The experimental design was Randomized Complete Block in three replications and the drought tolerance indices (SSI, STI, TOL, MP and GMP) were calculated for grain yield. The cultivar Cambin produced the highest grain yield under normal irrigation by 369.19 g m-2 while Arina had the highest yield (223.35 g m-2) under drought stress conditions. Stress tolerance (TOL) introduced Hindukesh, Iran2355 and Iran6476 as drought tolerant genotypes. Also, results showed that grain yield under stress and non-stress environments were highly correlated with the mean productivity (MP), the geometric mean productivity (GMP) and tolerance index (TOL). These genotypes could be further used in crosses for genetic studies and breeding programs for improvement tolerance to drought.

scholarly journals Water deficit stress tolerance assessment in barley cultivars using drought tolerance indices

2021 ◽  
Author(s):  
Md Habib ◽  
Md Mannan ◽  
Md Karim ◽  
Md Miah ◽  
Hari Singh
Keyword(s):  
Drought Stress ◽  
Drought Tolerance ◽  
Grain Yield ◽  
Stress Tolerance ◽  
Water Deficit ◽  
Geometric Mean ◽  
Research Work ◽  
Tolerance Index ◽  
Drought Tolerance Indices ◽  
Tolerance Indices

Abstract Crop productivity is greatly affected by drought stress. Understanding the drought tolerance capability of the crop varieties available in a country is the foremost consideration for drought adaptation. The objective of this research work was to examine the drought tolerance potentiality of 5 cultivated barley varieties (BARI Barley5, BARI Barley6, BARI Barley7, BARI Barley8 and BARI Barley9) through calculating drought tolerance indices. A completely randomized design (CRD) with three replications was followed in the experiment, where crops were grown under control (80% of FC) and water deficit environment (50% of FC). Stress Tolerance (TOL), Mean Productivity (MP), Geometric Mean Productivity (GMP), Stress Susceptibility Index (SSI), Stress Tolerance Index (STI), Harmonic Mean (HAM), Yield Index (YI) and Yield Stability Index (YSI) were calculated based on grain yield under control and drought conditions. BARI Barley7 and BARI Barley8 were the most tolerant variety and BARI Barley9 considered as susceptible based on TOL and SSI. Drought tolerance indices like MP, HAM, GMP, TOL as well as STI were showed a high correlation with grain yield under both conditions and were recognized as appropriate indices to identify varieties with high grain yield and low sensitivity to drought stress.

Selection indices to identify maize (Zea mays L.) hybrids adapted under drought-stress and drought-free conditions in a tropical climate

2016 ◽  
Vol 67 (10) ◽  
pp. 1087 ◽  
Author(s):  
Bhupender Kumar ◽  
Satish Kumar Guleria ◽  
Subhash M. Khanorkar ◽  
Rajender Babu Dubey ◽  
Jashvantlal Patel ◽  
...  
Keyword(s):  
Zea Mays ◽  
Drought Stress ◽  
Grain Yield ◽  
Zea Mays L ◽  
Tolerance Index ◽  
Yield Performance ◽  
Susceptibility Index ◽  
Drought Tolerant ◽  
Selection Indices ◽  
Stress Susceptibility

Drought stress is the most important production constraint in maize (Zea mays L.), especially in rainfed agriculture. To improve productivity of rainfed maize, the development of hybrids with tolerance to drought stress is an important objective in maize breeding programs. The present study was undertaken to identify maize hybrids that perform better under drought-stress and drought-free conditions by using various selection indices. These selection indices were calculated on the basis of yield (t ha–1) performance of hybrids measured under drought stress and optimum environments. A set of 38 cultivars was evaluated at 10 environments (representing five each of drought stress and optimum growing conditions). The average reduction in grain yield due to drought stress was 52%. Effects of genotype, environment and their interaction were significant sources of variation in determining grain yield, respectively explaining 5.0–7.4%, 55.0–60.2% and 12.0–15.0% of total variation in yield under drought-stress and drought-free conditions. Of eight selection indices considered for study, three indices such as harmonic mean, geometric mean, and stress tolerance index were identified as suitable for selection of genotypes capable of performing well both under drought-stress and drought-free environments. Drought response index and drought resistance index were found useful in identifying hybrids that performed better under drought stress. Stress susceptibility index was negatively correlated with yield measured under drought stress. Stress susceptibility index could be used as selection index but only in combination with yield performance data under water-deficit conditions in order to identify drought-tolerant hybrids with reasonable productivity. Test weight, shelling percentage, days to maturity, and ear girth were found to be useful traits for improving yield performance across diverse environments. Cultivation of identified drought-tolerant hybrids would be useful to enhance maize productivity in drought-stress environments.

scholarly journals Multi-Environment Screening of Durum Wheat Genotypes for Drought Tolerance in Changing Climatic Events

Agronomy ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 875
Author(s):  
Sourour Ayed ◽  
Afef Othmani ◽  
Imen Bouhaouel ◽  
Jaime A. Teixeira da Silva
Keyword(s):  
Drought Tolerance ◽  
Durum Wheat ◽  
Geometric Mean ◽  
Principal Component ◽  
Tolerance Index ◽  
Wheat Genotypes ◽  
Drought Tolerant ◽  
Drought Tolerance Indices ◽  
Tolerance Indices ◽  
Modern Varieties

Durum wheat is the most widely grown cereal in Tunisia, but its production is threatened by drought, which is exacerbated by climate change. This study aimed to identify drought-tolerant durum wheat genotypes from five modern varieties and six landraces in a multi-environment trial at two sites (Kef and Siliana, Tunisia) during three growing seasons under rainfed and irrigated conditions. Six drought tolerance indices (mean productivity (MP), geometric mean productivity (GMP), stress susceptibility index (SSI), tolerance index (TOL), stress tolerance index (STI), and yield stability index (YSI)) were used to evaluate the 11 genotypes. The environment was the dominant source of variation for grain yield (GY; 94.27%), followed by the environment × genotype interaction (4.06%) and genotype (1.65%). Cluster analysis based on GY identified four environment-based groups with distinct water treatments, extreme minimum/maximum temperatures, and rainfall. Principal component analysis and a correlation matrix revealed that drought tolerance indices significantly correlated with GY in non-stressed and stressed conditions and could be separated into four groups. Based on STI, MP, and GMP, G6 and G8 (landraces) were the most drought-tolerant genotypes attaining high GY in both conditions. TOL was able to discriminate G1, G3, and G5 (modern varieties) as well as drought-susceptible genotypes, all of which were suitable for irrigation. Genotypes G7, G9, G10, and G11 (landraces), which had high SSI and lowest STI, MP, GMP, and YSI values, were susceptible to drought and were thus not suitable for cultivation in both conditions. Finally, G2 and G4 (modern varieties), which had an intermediate rank for different indices, were classified as semi-tolerant or sensitive genotypes. Drought tolerance indices and genotype ranks were helpful tools to screen drought-tolerant genotypes with a large adaptation to a range of environments, namely irrigated and rainfed conditions (landraces G6 and G8), or genotypes with the ability to adapt (modern varieties G1, G3, and G5) to irrigated conditions.

scholarly journals Evaluation and comparison of drought tolerance in some wild diploid populations, tetraploid and hexaploid cultivars of wheat using stress tolerance indices

2020 ◽  
Vol 115 (1) ◽  
pp. 105
Author(s):  
Sara KHOSRAVI ◽  
Reza AZIZINEZHAD ◽  
Amin BAGHIZADEH ◽  
Mahmood MALEKI
Keyword(s):  
Drought Stress ◽  
Drought Tolerance ◽  
Grain Yield ◽  
Stress Tolerance ◽  
Block Design ◽  
Geometric Mean ◽  
Tolerance Index ◽  
Wheat Genotypes ◽  
Drought Tolerance Indices ◽  
Tolerance Indices

<p>This study was carried out on grain yield in wheat genotypes with the aim of assessing genetic potential of drought tolerance. The experiment was performed as split plot in the form of randomized complete block design with three replications under normal and drought stress conditions with 32 genotypes. Based on grain yield, and under the condition of non-stress and drought stress, 5 drought tolerance indices are estimated including Tolerance Index (TOL), Stress Tolerance (STI), Mean Productivity (MP), Geometric Mean (GMP) and, Harmonic Mean (HM) for all kinds of genotypes. The analysis of yield correlation and drought tolerance indices in two environments indicated that STI, MP, GMP, HM indices were the most suitable parameters for screening wheat genotypes. Principal components analysis exhibited that the 83 % of first principal component and the 15 % of second one justified the variation of the initial data. Drawing bi-plot diagram declared that Sabalan, Shabrang, Aria, Azar, Azadi, and T2 genotypes were highly functional and resistant to drought stress.</p>

Sign in / Sign up

Export Citation Format

Share Document