scholarly journals Structural Organization of Dental Biofilm Formed in situ in the Presence of Sucrose Associated to Maltodextrin

2019 ◽  
Vol 30 (1) ◽  
pp. 36-42
Author(s):  
Gabriela Rezende ◽  
Rodrigo Alex Arthur ◽  
Marcelo Lazzaron Lamers ◽  
Lina Naomi Hashizume
Keyword(s):  
Laser Scanning ◽  
Structural Organization ◽  
Corn Starch ◽  
Extracellular Polysaccharide ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Biofilm Thickness ◽  
Dental Biofilm ◽  
Bovine Enamel

Abstract Maltodextrins, derived from corn starch, have been added to industrialized food combined with sucrose. However it is not clear the diffusion properties of the dental biofilm matrix and the tridimensional structure of multispecies biofilms formed in the presence of these carbohydrates. Therefore, the aim of study was to investigate by confocal laser scanning microscopy (CLSM) the structural organization of the multispecies dental biofilm formed in situ under exposure to sucrose associated to maltodextrin. Adult volunteers wore an intraoral palatal appliance containing bovine enamel blocks. They were instructed to remove the appliance 8 times per day and drop the following solutions on the enamel blocks: deionized distilled water (DDW), maltodextrin, sucrose + maltodextrin or sucrose. Biofilms formed were stained and the percentage of extracellular polysaccharide (%EPS) and thickness were determined by CLSM. Biofilm formed in the presence of sucrose and sucrose + maltodextrin presented similar %EPS and higher than DDW and maltodextrin. Regarding to the biofilm thickness, sucrose and sucrose + maltodextrin treatments were thicker than DDW and maltodextrin and similar between them. The structural organization of the multispecies dental biofilm formed in situ in the presence of sucrose does not change when this carbohydrate is associated to maltodextrin.

scholarly journals Actinomyces naeslundii in initial dental biofilm formation

Microbiology ◽  
2009 ◽  
Vol 155 (7) ◽  
pp. 2116-2126 ◽  
Author(s):  
I. Dige ◽  
M. K. Raarup ◽  
J. R. Nyengaard ◽  
M. Kilian ◽  
B. Nyvad
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Oral Appliances ◽  
Dental Biofilm ◽  
Actinomyces Naeslundii ◽  
Combined Use ◽  
Notable Increase

The combined use of confocal laser scanning microscopy (CLSM) and fluorescent in situ hybridization (FISH) offers new opportunities for analysis of the spatial relationships and temporal changes of specific members of the microbiota of intact dental biofilms. The purpose of this study was to analyse the patterns of colonization and population dynamics of Actinomyces naeslundii compared to streptococci and other bacteria during the initial 48 h of biofilm formation in the oral cavity. Biofilms developed on standardized glass slabs mounted in intra-oral appliances worn by ten individuals for 6, 12, 24 and 48 h. The biofilms were subsequently labelled with probes against A. naeslundii (ACT476), streptococci (STR405) or all bacteria (EUB338), and were analysed by CLSM. Labelled bacteria were quantified by stereological tools. The results showed a notable increase in the number of streptococci and A. naeslundii over time, with a tendency towards a slower growth rate for A. naeslundii compared with streptococci. A. naeslundii was located mainly in the inner part of the multilayered biofilm, indicating that it is one of the species that attaches directly to the acquired pellicle. The participation of A. naeslundii in the initial stages of dental biofilm formation may have important ecological consequences.

scholarly journals Novel Broad-Spectrum Antimicrobial Photoinactivation ofIn SituOral Biofilms by Visible Light plus Water-Filtered Infrared A

2014 ◽  
Vol 80 (23) ◽  
pp. 7324-7336 ◽  
Author(s):  
L. Karygianni ◽  
S. Ruf ◽  
M. Follo ◽  
E. Hellwig ◽  
M. Bucher ◽  
...  
Keyword(s):  
Visible Light ◽  
Laser Scanning ◽  
Treatment Approach ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Pharmaceutical Treatment ◽  
Oral Biofilms ◽  
Biofilm Bacteria ◽  
Bovine Enamel

ABSTRACTAntimicrobial photodynamic therapy (APDT) has gained increased attention as an alternative treatment approach in various medical fields. However, the effect of APDT using visible light plus water-filtered infrared A (VIS + wIRA) on oral biofilms remains unexplored. For this purpose, initial and mature oral biofilms were obtainedin situ; six healthy subjects wore individual upper jaw acrylic devices with bovine enamel slabs attached to their proximal sites for 2 h or 3 days. The biofilms were incubated with 100 μg ml−1toluidine blue O (TB) or chlorin e6 (Ce6) and irradiated with VIS + wIRA with an energy density of 200 mW cm−2for 5 min. After cultivation, the CFU of half of the treated biofilm samples were quantified, whereas following live/dead staining, the other half of the samples were monitored by confocal laser scanning microscopy (CLSM). TB- and Ce6-mediated APDT yielded a significant decrease of up to 3.8 and 5.7 log10CFU for initial and mature oral biofilms, respectively. Quantification of the stained photoinactivated microorganisms confirmed these results. Overall, CLSM revealed the diffusion of the tested photosensitizers into the deepest biofilm layers after exposure to APDT. In particular, Ce6-aided APDT presented elevated permeability and higher effectiveness in eradicating 89.62% of biofilm bacteria compared to TB-aided APDT (82.25%) after 3 days. In conclusion, antimicrobial photoinactivation using VIS + wIRA proved highly potent in eradicating oral biofilms. Since APDT excludes the development of microbial resistance, it could supplement the pharmaceutical treatment of periodontitis or peri-implantitis.

3-D imaging of cells using a confocal laser scanning microscope and digital image processing

1988 ◽  
Vol 46 ◽  
pp. 96-97
Author(s):  
Thomas M. Jovin ◽  
Michel Robert-Nicoud ◽  
Donna J. Arndt-Jovin ◽  
Thorsten Schormann
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Scanning Microscope ◽  
Laser Scanning Microscope ◽  
Biochemical Processes ◽  
Adjacent Structures

Light microscopic techniques for visualizing biomolecules and biochemical processes in situ have become indispensable in studies concerning the structural organization of supramolecular assemblies in cells and of processes during the cell cycle, transformation, differentiation, and development. Confocal laser scanning microscopy offers a number of advantages for the in situ localization and quantitation of fluorescence labeled targets and probes: (i) rejection of interfering signals emanating from out-of-focus and adjacent structures, allowing the “optical sectioning” of the specimen and 3-D reconstruction without time consuming deconvolution; (ii) increased spatial resolution; (iii) electronic control of contrast and magnification; (iv) simultanous imaging of the specimen by optical phenomena based on incident, scattered, emitted, and transmitted light; and (v) simultanous use of different fluorescent probes and types of detectors.We currently use a confocal laser scanning microscope CLSM (Zeiss, Oberkochen) equipped with 3-laser excitation (u.v - visible) and confocal optics in the fluorescence mode, as well as a computer-controlled X-Y-Z scanning stage with 0.1 μ resolution.

scholarly journals Influence of Aging on Corrosion Behaviour of the 6061 Cast Aluminium Alloy

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1821
Author(s):  
Ting He ◽  
Wei Shi ◽  
Song Xiang ◽  
Chaowen Huang ◽  
Ronald G. Ballinger
Keyword(s):  
Aluminium Alloy ◽  
Laser Scanning ◽  
Corrosion Behaviour ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Kelvin Probe ◽  
Force Microscopy ◽  
The Matrix ◽  
6061 Aluminium Alloy

The influence of AlFeSi and Mg2Si phases on corrosion behaviour of the cast 6061 aluminium alloy was investigated. Scanning Kelvin probe force microscopy (SKPFM), electron probe microanalysis (EPMA), and in situ observations by confocal laser scanning microscopy (CLSM) were used. It was found that Mg2Si phases were anodic relative to the matrix and dissolved preferentially without significantly affecting corrosion propagation. The AlFeSi phases’ influence on 6061 aluminium alloy local corrosion was greater than that of the Mg2Si phases. The corroded region width reached five times that of the AlFeSi phase, and the accelerating effect was terminated as the AlFeSi dissolved.

scholarly journals In Situ 3D-Imaging of the Inner Ear Synapses with a Cochlear Implant

Life ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 301
Author(s):  
Kathrin Malfeld ◽  
Nina Armbrecht ◽  
Holger A. Volk ◽  
Thomas Lenarz ◽  
Verena Scheper
Keyword(s):  
Cochlear Implant ◽  
Inner Ear ◽  
Laser Scanning ◽  
3D Imaging ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Sensory Cells ◽  
Residual Hearing ◽  
Preparation Methods

In recent years sensorineural hearing loss was found to affect not exclusively, nor at first, the sensory cells of the inner ear. The sensory cells’ synapses and subsequent neurites are initially damaged. Auditory synaptopathies also play an important role in cochlear implant (CI) care, as they can lead to a loss of physiological hearing in patients with residual hearing. These auditory synaptopathies and in general the cascades of hearing pathologies have been in the focus of research in recent years with the aim to develop more targeted and individually tailored therapeutics. In the current study, a method to examine implanted inner ears of guinea pigs was developed to examine the synapse level. For this purpose, the cochlea is made transparent and scanned with the implant in situ using confocal laser scanning microscopy. Three different preparation methods were compared to enable both an overview image of the cochlea for assessing the CI position and images of the synapses on the same specimen. The best results were achieved by dissection of the bony capsule of the cochlea.

scholarly journals In Situ Characterization ofNitrospira-Like Nitrite-Oxidizing Bacteria Active in Wastewater Treatment Plants

2001 ◽  
Vol 67 (11) ◽  
pp. 5273-5284 ◽  
Author(s):  
Holger Daims ◽  
Jeppe L. Nielsen ◽  
Per H. Nielsen ◽  
Karl-Heinz Schleifer ◽  
Michael Wagner
Keyword(s):  
Wastewater Treatment ◽  
16S Rrna ◽  
Laser Scanning ◽  
Wastewater Treatment Plants ◽  
Carbon Sources ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Rrna Gene ◽  
Phylogenetic Affiliation

ABSTRACT Uncultivated Nitrospira-like bacteria in different biofilm and activated-sludge samples were investigated by cultivation-independent molecular approaches. Initially, the phylogenetic affiliation of Nitrospira-like bacteria in a nitrifying biofilm was determined by 16S rRNA gene sequence analysis. Subsequently, a phylogenetic consensus tree of theNitrospira phylum including all publicly available sequences was constructed. This analysis revealed that the genusNitrospira consists of at least four distinct sublineages. Based on these data, two 16S rRNA-directed oligonucleotide probes specific for the phylum and genus Nitrospira, respectively, were developed and evaluated for suitability for fluorescence in situ hybridization (FISH). The probes were used to investigate the in situ architecture of cell aggregates ofNitrospira-like nitrite oxidizers in wastewater treatment plants by FISH, confocal laser scanning microscopy, and computer-aided three-dimensional visualization. Cavities and a network of cell-free channels inside the Nitrospiramicrocolonies were detected that were water permeable, as demonstrated by fluorescein staining. The uptake of different carbon sources byNitrospira-like bacteria within their natural habitat under different incubation conditions was studied by combined FISH and microautoradiography. Under aerobic conditions, theNitrospira-like bacteria in bioreactor samples took up inorganic carbon (as HCO3 − or as CO2) and pyruvate but not acetate, butyrate, and propionate, suggesting that these bacteria can grow mixotrophically in the presence of pyruvate. In contrast, no uptake by theNitrospira-like bacteria of any of the carbon sources tested was observed under anoxic or anaerobic conditions.

Monitoring the development of anaerobic biofilms using fluorescent in situ hybridization and confocal laser scanning microscopy

2000 ◽  
Vol 41 (12) ◽  
pp. 69-77 ◽  
Author(s):  
J. C. Araujo ◽  
G. Brucha ◽  
J. R. Campos ◽  
R. F. Vazoller
Keyword(s):  
In Situ Hybridization ◽  
Confocal Laser Scanning Microscopy ◽  
Fluorescent In Situ Hybridization ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Scanning Microscopy ◽  
Confocal Laser ◽  
Anaerobic Consortium

In this study we investigated the development of anaerobic biofilm using a laboratory reactor. We were especially interested in comparing the organization of anaerobic cells (particularly those that are very common in domestic sewage sludge) in a hydrophilic (glass) versus a hydrophobic (polypropylene) surface. Fluorescent in situ hybridization (FISH) with domain and group specific probes directed against 16S ribosomal RNA were used to quantify microbial composition in the biofilm. FISH and confocal laser scanning microscopy (CLSM) were used to elucidate spatial distribution of microbes in the biofilms. Two experiments were carried out, one with pure methanogenic organisms and the other with a microbial anaerobic consortium. The pure methanogen cultures, Methanobacterium formicicum (DSM 1535); Methanosaeta concilli (DSM 3671) and Methanosarcina barkeri (DSM 800) were used to seed the modified Robbins Device (MRD) to allow the development of biofilms on polypropylene and glass surfaces during the 9-days experiment. The results showed that all the three species were colonizing both surfaces after two and nine days of experimental period. In another experiment, with polypropylene coupons only, MRD was seeded with a microbial anaerobic consortium and biofilm formation was studied during 11 days. At the end of this period, the biofilms generated were of uneven thickness with areas of minimal or no surface coverage and areas where the biofilm attained a thickness of 7.0 to 9.0 μm as revealed by CLSM. The results showed that the modified Robbins Device together with the fluorescent in situ hybridization and confocal laser scanning microscopy are suitable tools to study anaerobic biofilm development in different kinds of support materials.

Sign in / Sign up

Export Citation Format

Share Document