scholarly journals Examination of mycological samples by means of the scanning electron microscope

1973 ◽  
Vol 7 (2) ◽  
pp. 79-85 ◽  
Author(s):  
M. Thibaut ◽  
M. Ansel
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Scanning Microscopy ◽  
Rhizopus Nigricans ◽  
Emericella Nidulans ◽  
Hull Cells ◽  
Scanning Electron

Three species of Siphomycetes: Rhizopus arhizus, Rhizopus equinus and Rhizopus nigricans, as well as a Septomycete: Emericella nidulans, have been examined by means of a scanning electron microscope. Among the difjerent Rhizopus, this technique showed differences in the appearance of the sporangia. In Emericella nidulans, scanning microscopy enábled one to ascertain that the "Hull cells" were completely hollow and also demonstrated the ornemented aspect of the ascospores.

scholarly journals Ultrastructure of cleistothecia and the stages of life cycle of Microsphaera palczewskii by scanning electron microscope

2014 ◽  
Vol 32 (2) ◽  
pp. 275-278
Author(s):  
Joanna Z. Kadłubowska ◽  
Ewa Kalinowska-Kucharska
Keyword(s):  
Electron Microscope ◽  
Life Cycle ◽  
Scanning Electron Microscope ◽  
Scanning Microscopy ◽  
Developmental Cycle ◽  
Central Poland ◽  
Caragana Arborescens ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Scanning Electron

Several year long investigations of the developmental cycle of <i>Microsphaera palczewskii</i> occurring on the leaves of <i>Caragana arborescens</i> in Central Poland are reported. The material was studied with light and scanning electron microscopes. The scanning microscopy micrographs of the clistothecia and appendages presented in this report are the first micrographs of this species.

Scanning Microscopy of Thin Biological Specimens

1969 ◽  
Vol 27 ◽  
pp. 48-49
Author(s):  
A. V. Crewe ◽  
J. Wall
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Scanning Microscopy ◽  
Resolving Power ◽  
Electron Current ◽  
Scanning Electron ◽  
Transmission Microscope

We have recently improved our scanning electron microscope to a level that point resolution of 5 Å or so is possible. The electron current in the focused spot is about 10-10 amps so that good pictures can be obtained with a 10 sec exposure and the highest quality pictures can be obtained in 100 sec.The resolving power of this microscope is now comparable to that in a conventional transmission microscope for thin biological specimens and it is therefore of value to compare micrographs taken on the two types of instrument.

Contrast Effects in High Resolution, Low Voltage SEM

1974 ◽  
Vol 32 ◽  
pp. 452-453
Author(s):  
L. M. Welter
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Scanning Electron Microscope ◽  
Field Emission ◽  
Low Voltage ◽  
Electron Source ◽  
Scanning Microscopy ◽  
Contrast Effects ◽  
Probe Current ◽  
Scanning Electron

A scanning electron microscope using a field emission electron source and a single electromagnetic lens can produce a resolution of less than 180Å using an accelerating voltage of only 900v. High resolution, low voltage (0.1-2kV) scanning microscopy offers a number of advantages over the use of higher accelerating voltages. Specimen damage may be reduced because the power (P≃IV) which must be absorbed by the specimen for operation at a given probe current (I) is decreased in proportion to the reduction in accelerating voltage (V).

The Alteration of the Pore Spaces in Sandstones

1973 ◽  
Vol 31 ◽  
pp. 210-211
Author(s):  
R. E. Ferrell ◽  
G. G. Paulson
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
The Other ◽  
Coarse Grained ◽  
Depositional Fabric ◽  
Soluble Components ◽  
Scanning Electron ◽  
Shape And Size

The pore spaces in sandstones are the result of the original depositional fabric and the degree of post-depositional alteration that the rock has experienced. The largest pore volumes are present in coarse-grained, well-sorted materials with high sphericity. The chief mechanisms which alter the shape and size of the pores are precipitation of cementing agents and the dissolution of soluble components. Each process may operate alone or in combination with the other, or there may be several generations of cementation and solution.The scanning electron microscope has ‘been used in this study to reveal the morphology of the pore spaces in a variety of moderate porosity, orthoquartzites.

The Broad Applications of the Scanning Electron Microscope

1969 ◽  
Vol 27 ◽  
pp. 20-21
Author(s):  
C. T. Nightingale ◽  
S. E. Summers ◽  
T. P. Turnbull
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Light Microscopy ◽  
Surface Topography ◽  
Great Depth ◽  
Resolving Power ◽  
Depth Of Field ◽  
Pictorial Representations ◽  
Scanning Electron

The ease of operation of the scanning electron microscope has insured its wide application in medicine and industry. The micrographs are pictorial representations of surface topography obtained directly from the specimen. The need to replicate is eliminated. The great depth of field and the high resolving power provide far more information than light microscopy.

Observability of Very Thick Specimen by Using Transmission Scanning Electron Microscope

1971 ◽  
Vol 29 ◽  
pp. 26-27
Author(s):  
K. Shibatomi ◽  
T. Yamanoto ◽  
H. Koike
Keyword(s):  
Electron Microscope ◽  
Image Quality ◽  
Scanning Electron Microscope ◽  
Chromatic Aberration ◽  
Image Contrast ◽  
Objective Lens ◽  
Thick Specimen ◽  
Transmission Electron ◽  
Scanning Electron

In the observation of a thick specimen by means of a transmission electron microscope, the intensity of electrons passing through the objective lens aperture is greatly reduced. So that the image is almost invisible. In addition to this fact, it have been reported that a chromatic aberration causes the deterioration of the image contrast rather than that of the resolution. The scanning electron microscope is, however, capable of electrically amplifying the signal of the decreasing intensity, and also free from a chromatic aberration so that the deterioration of the image contrast due to the aberration can be prevented. The electrical improvement of the image quality can be carried out by using the fascionating features of the SEM, that is, the amplification of a weak in-put signal forming the image and the descriminating action of the heigh level signal of the background. This paper reports some of the experimental results about the thickness dependence of the observability and quality of the image in the case of the transmission SEM.

Resolution of a Transmitted Electron Image Formed by A Scanning Electron Microscope

1970 ◽  
Vol 28 ◽  
pp. 386-387
Author(s):  
S. Takashima ◽  
H. Hashimoto ◽  
S. Kimoto
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Chromatic Aberration ◽  
Objective Lens ◽  
Specimen Thickness ◽  
Probe Diameter ◽  
Transmission Electron ◽  
Electron Image ◽  
Conventional Transmission Electron Microscope ◽  
Scanning Electron

The resolution of a conventional transmission electron microscope (TEM) deteriorates as the specimen thickness increases, because chromatic aberration of the objective lens is caused by the energy loss of electrons). In the case of a scanning electron microscope (SEM), chromatic aberration does not exist as the restrictive factor for the resolution of the transmitted electron image, for the SEM has no imageforming lens. It is not sure, however, that the equal resolution to the probe diameter can be obtained in the case of a thick specimen. To study the relation between the specimen thickness and the resolution of the trans-mitted electron image obtained by the SEM, the following experiment was carried out.

Characterization of Sputtered Films using the Scanning Electron Microscope

1973 ◽  
Vol 31 ◽  
pp. 44-45
Author(s):  
R. F. Schneidmiller ◽  
W. F. Thrower ◽  
C. Ang
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Sputtered Films ◽  
Plasma Sputtering ◽  
Microelectronic Devices ◽  
Control Film ◽  
Scanning Electron

Solid state materials in the form of thin films have found increasing structural and electronic applications. Among the multitude of thin film deposition techniques, the radio frequency induced plasma sputtering has gained considerable utilization in recent years through advances in equipment design and process improvement, as well as the discovery of the versatility of the process to control film properties. In our laboratory we have used the scanning electron microscope extensively in the direct and indirect characterization of sputtered films for correlation with their physical and electrical properties.Scanning electron microscopy is a powerful tool for the examination of surfaces of solids and for the failure analysis of structural components and microelectronic devices.

Field Emission SEM Equipped With Noise Compensator

1973 ◽  
Vol 31 ◽  
pp. 302-303
Author(s):  
S. Saito ◽  
H. Todokoro ◽  
S. Nomura ◽  
T. Komoda
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Scanning Electron Microscope ◽  
Field Emission ◽  
Low Contrast ◽  
Probe Current ◽  
High Resolution Images ◽  
Scanning Electron

Field emission scanning electron microscope (FESEM) features extremely high resolution images, and offers many valuable information. But, for a specimen which gives low contrast images, lateral stripes appear in images. These stripes are resulted from signal fluctuations caused by probe current noises. In order to obtain good images without stripes, the fluctuations should be less than 1%, especially for low contrast images. For this purpose, the authors realized a noise compensator, and applied this to the FESEM.Fig. 1 shows an outline of FESEM equipped with a noise compensator. Two apertures are provided gust under the field emission gun.

Visualization of Internal Skin Structures with the Scanning Electron Microscope

1969 ◽  
Vol 27 ◽  
pp. 46-47
Author(s):  
Emil Bernstein
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Great Depth ◽  
Hair Follicles ◽  
Depth Of Field ◽  
Pig Skin ◽  
Realistic Picture ◽  
Main Components ◽  
Scanning Electron

An interesting method for examining structures in g. pig skin has been developed. By modifying an existing technique for splitting skin into its two main components—epidermis and dermis—we can in effect create new surfaces which can be examined with the scanning electron microscope (SEM). Although this method is not offered as a complete substitute for sectioning, it provides the investigator with a means for examining certain structures such as hair follicles and glands intact. The great depth of field of the SEM complements the technique so that a very “realistic” picture of the organ is obtained.

Sign in / Sign up

Export Citation Format

Share Document