scholarly journals Synergistic effect of RHA and FCW in alkali-aggregate reaction mitigation

2019 ◽  
Vol 19 (2) ◽  
pp. 7-20
Author(s):  
Patrícia Guillante ◽  
Aguida Gomes de Abreu ◽  
Marlova Piva Kulakowski ◽  
Maurício Mancio ◽  
Claudio de Souza Kazmierczak
Keyword(s):  
Compressive Strength ◽  
Synergistic Effect ◽  
Rice Husk Ash ◽  
Strength Development ◽  
Clay Brick ◽  
Small Loss ◽  
Pozzolanic Material ◽  
Alkali Aggregate Reaction ◽  
Different Types ◽  
Compressive Strength Development

Abstract Pozzolans rich in silica, such as Rice Husk Ash (RHA), contribute to compressive strength gain but at the same time might increase alkali-aggregate reaction (AAR) in mortar mixtures. Pozzolans that have aluminates, such as Fired Clay Brick Waste (FCW), can be efficient to mitigate AAR but tend to lead to a slower compressive strength development. The association of different types of pozzolans, however, may result in a synergistic effect, compensating individual deficiencies. This paper presents a study of mixtures containing RHA, FCW and these two materials combined, aiming to obtain benefits in the mechanical behavior and in the durability regarding AAR. A substitution rate of 20% Portland cement by pozzolanic material was used. Through accelerated AAR tests and compressive strength measurements, it was found that while RHA is considered harmful to AAR - even when using an innocuous aggregate - FCW presents benefits, also avoiding this deleterious effect when combined with RHA. The same occurs in the compressive strength development, where RHA compensates a small loss of compressive strength associated with the use of FWC alone.

scholarly journals The potential use of pumice in mine backfill

2020 ◽  
Vol 1 ◽  
Author(s):  
Mohammed A. Hefni
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Mining Industry ◽  
Strength Development ◽  
Natural Pozzolan ◽  
Mine Backfill ◽  
Natural Pozzolans ◽  
Cemented Backfill ◽  
Compressive Strength Development ◽  
Potential Use

Abstract The use of natural pozzolans in concrete applications is gaining more attention because of the associated environmental, economic, and technical benefits. In this study, reference cemented mine backfill samples were prepared using Portland cement, and experimental samples were prepared by partially replacing Portland cement with 10 or 20 wt.% fly ash as a byproduct (artificial) pozzolan or pumice as a natural pozzolan. Samples were cured for 7, 14, and 28 days to investigate uniaxial compressive strength development. Backfill samples containing 10 wt.% pumice had almost a similar compressive strength as reference samples. There is strong potential for pumice to be used in cemented backfill to minimize costs, improve backfill properties, and promote the sustainability of the mining industry.

Physical Properties of Cement Mortar Containing Waste Ash

2015 ◽  
Vol 804 ◽  
pp. 129-132
Author(s):  
Sumrerng Rukzon ◽  
Prinya Chindaprasirt
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Cement Mortar ◽  
Ash Content ◽  
Water Requirement ◽  
Test Results ◽  
Pozzolanic Material ◽  
Materials Used

This research studies the potential for using waste ash from industrial and agricultural by-products as a pozzolanic material. Classified fly ash (FA) and ground rice husk ash (RA) were the materials used. Water requirement, compressive strength and porosity of cement mortar were investigated. Test results indicated that FA and RA (waste ash) have a high potential to be used as a good pozzolanic material. The water requirement of mortar mix decreases with the increases in fly ash content. For ground rice husk ash (RA), the water requirement of mortar mix increases with the increases in rice husk ash content. In addition, the reduction in porosity was associated with the increase in compressive strength.

scholarly journals Strength and Durability Performance of Alkali-Activated Rice Husk Ash Geopolymer Mortar

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Yun Yong Kim ◽  
Byung-Jae Lee ◽  
Velu Saraswathy ◽  
Seung-Jun Kwon
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Polymerization Reaction ◽  
Strength Development ◽  
Geopolymer Concrete ◽  
Portland Cement Concrete ◽  
Mix Proportion ◽  
Strength And Durability ◽  
Alkali Activated

This paper describes the experimental investigation carried out to develop the geopolymer concrete based on alkali-activated rice husk ash (RHA) by sodium hydroxide with sodium silicate. Effect on method of curing and concentration of NaOH on compressive strength as well as the optimum mix proportion of geopolymer mortar was investigated. It is possible to achieve compressive strengths of 31 N/mm2and 45 N/mm2, respectively for the 10 M alkali-activated geopolymer mortar after 7 and 28 days of casting when cured for 24 hours at 60°C. Results indicated that the increase in curing period and concentration of alkali activator increased the compressive strength. Durability studies were carried out in acid and sulfate media such as H2SO4, HCl, Na2SO4, and MgSO4environments and found that geopolymer concrete showed very less weight loss when compared to steam-cured mortar specimens. In addition, fluorescent optical microscopy and X-ray diffraction (XRD) studies have shown the formation of new peaks and enhanced the polymerization reaction which is responsible for strength development and hence RHA has great potential as a substitute for ordinary Portland cement concrete.

Sign in / Sign up

Export Citation Format

Share Document