scholarly journals The use of CBERS (China-Brazil Earth Resources Satellite) to trace the dynamics of total suspended matter at an urbanized coastal area

2017 ◽  
Vol 65 (2) ◽  
pp. 309-323
Author(s):  
Maria Fernanda Colo Giannini ◽  
Joseph Harari ◽  
Aurea Maria Ciotti
Keyword(s):  
Satellite Data ◽  
Spatial Data ◽  
Suspended Matter ◽  
Data Retrieval ◽  
Coastal Areas ◽  
Total Suspended Matter ◽  
Southeastern Brazil ◽  
Inorganic Particles ◽  
Quality Of Water

ABSTRACT The distribution of organic and inorganic particles in the water column, or the total suspended matter (TSM), responds to local and remote oceanographic and meteorological processes, potentially impacting biogeochemical cycles. In shallow coastal areas, where particles have distinct origins and compositions and vary in different time scales, the use of remote sensing tools for monitoring and tracing this material is highly encouraged due to the high temporal and spatial data resolution. The objective of this work was to understand the variability of in situ TSM at Santos Bay (Southeastern Brazil) and its response to oceanographic and meteorological conditions. We also aimed to verify the applicability of the satellite data from CBERS-2 sensor in order to map the dynamics of TSM in this region. Our results have shown that the distribution of TSM in Santos Bay varied consistently with winds, currents and tidal cycles, with significant relationships emphasizing the role of south-western winds and spring tides. Neap tides and eastern winds, along with rainfall, play an important role in the input of organic matter into the bay. In conclusion, our analyses showed that the main patterns observed in situ regarding the responses of TSM to the ocean-meteorological processes could be reproduced in the CBERS-2 satellite data, after simple and standard methods of images processing. TSM data retrieval from CBERS-2 or other satellite sensors were shown to be feasible, becoming an essential tool for synoptic observations of the composition and quality of water, especially at urbanized and impacted coastal areas.

scholarly journals Synergy between satellite observations and model simulations during extreme events

2018 ◽  
Author(s):  
Anne Wiese ◽  
Joanna Staneva ◽  
Johannes Schultz-Stellenfleth ◽  
Arno Behrens ◽  
Luciana Fenoglio-Marc ◽  
...  
Keyword(s):  
Satellite Data ◽  
Extreme Events ◽  
Wave Model ◽  
Coastal Areas ◽  
In Situ Measurements ◽  
Model Simulations ◽  
Significant Wave ◽  
Operational Analysis

Abstract. In this study, the quality of wind and wave data provided by the new Sentinel-3A satellite is evaluated. We focus on coastal areas, where altimeter data are of lower quality than those for the open ocean. The satellite data of Sentinel-3A, Jason-2 and CryoSat-2 are assessed in a comparison with in situ measurements and spectral wave model (WAM) simulations. The sensitivity of the wave model to wind forcing is evaluated using data with different temporal and spatial resolution, such as ERA-Interim and ERA5 reanalyses, ECMWF operational analysis and short-range forecasts, German Weather Service (DWD) forecasts and regional atmospheric model simulations -coastDat. Numerical simulations show that both the wave model forced using the ERA5 reanalyses and that forced using the ECMWF operational analysis/forecast demonstrate the best capability over the whole study period, as well as during extreme events. To further estimate the variance of the significant wave height of ensemble members for different wind forcings, especially during extreme events, an empirical orthogonal function (EOF) analysis is performed. Intercomparisons between remote sensing and in situ observations demonstrate that the overall quality of the former is good over the North Sea and Baltic Sea throughout the study period, although the significant wave heights estimated based on satellite data tend to be greater than the in situ measurements by 7 cm to 26 cm. The quality of all satellite data near the coastal area decreases; however, within 10 km off the coast, Sentinel-3A performs better than the other two satellites. Analyses in which data from satellite tracks are separated in terms of onshore and offshore flights have been carried out. No substantial differences are found when comparing the statistics for onshore and offshore flights. Moreover, no substantial differences are found between satellite tracks under various metocean conditions. Furthermore, the satellite data quality does not depend on the wind direction relative to the flight direction. Thus, the quality of the data obtained by the new Sentinel-3A satellite over coastal areas is improved compared to that of older satellites.

scholarly journals Integration of HF Radar Observations for an Enhanced Coastal Mean Dynamic Topography

2020 ◽  
Vol 7 ◽  
Author(s):  
Ainhoa Caballero ◽  
Sandrine Mulet ◽  
Nadia Ayoub ◽  
Ivan Manso-Narvarte ◽  
Xabier Davila ◽  
...  
Keyword(s):  
High Resolution ◽  
Sea Level ◽  
Satellite Data ◽  
Coastal Areas ◽  
Hf Radar ◽  
Global Ocean ◽  
Dynamic Topography ◽  
Mean Dynamic Topography ◽  
Radar Measurements

Satellite altimeters provide continuous information of the sea level variability and mesoscale processes for the global ocean. For estimating the sea level above the geoid and monitoring the full ocean dynamics from altimeters measurements, a key reference surface is needed: The Mean Dynamic Topography (MDT). However, in coastal areas, where, in situ measurements are sparse and the typical scales of the motion are generally smaller than in the deep ocean, the global MDT solutions are less accurate than in the open ocean, even if significant improvement has been done in the past years. An opportunity to fill in this gap has arisen with the growing availability of long time-series of high-resolution HF radar surface velocity measurements in some areas, such as the south-eastern Bay of Biscay. The prerequisite for the computation of a coastal MDT, using the newly available data of surface velocities, was to obtain a robust methodology to remove the ageostrophic signal from the HF radar measurements, in coherence with the scales resolved by the altimetry. To that end, we first filtered out the tidal and inertial motions, and then, we developed and tested a method that removed the Ekman component and the remaining divergent part of the flow. A regional high-resolution hindcast simulation was used to assess the method. Then, the processed HF radar geostrophic velocities were used in synergy with additional in situ data, altimetry, and gravimetry to compute a new coastal MDT, which shows significant improvement compared with the global MDT. This study showcases the benefit of combining satellite data with continuous, high-frequency, and synoptic in situ velocity data from coastal radar measurements; taking advantage of the different scales resolved by each of the measuring systems. The integrated analysis of in situ observations, satellite data, and numerical simulations has provided a further step in the understanding of the local ocean processes, and the new MDT a basis for more reliable monitoring of the study area. Recommendations for the replicability of the methodology in other coastal areas are also provided. Finally, the methods developed in this study and the more accurate regional MDT could benefit present and future high-resolution altimetric missions.

scholarly journals Trophic status assessment of small turbid lakes comparing remote sensing and in situ data: case study at lower Danube floodplain

2020 ◽  
Vol 32 ◽  
pp. 53-63
Author(s):  
Stefan Kazakov ◽  
Valko Biserkov ◽  
Luchezar Pehlivanov ◽  
Stoyan Nedkov
Keyword(s):  
Remote Sensing ◽  
Chlorophyll A ◽  
Satellite Data ◽  
Suspended Matter ◽  
Trophic Status ◽  
Remote Sensing Data ◽  
Water Quality Monitoring ◽  
Floodplain Lakes ◽  
In Situ Data

The aim of the study was to compare in situ and remote sensing data, in order to assess the applicability of satellite images in water quality monitoring of floodplain lakes. Two indicators of trophic status were compared: chlorophyll a and total suspended matter. Two lakes on Lower Danube floodplain were selected: Srebarna and Malak Preslavets. Data were obtained in July and August 2018. Sentinel 2 MSI L1c images were analyzed in SeNtinel Application Platform (SNAP), (v. 6.0). According to in situ data, Srebarna Lake indicated status of eutrophication, while Malak Preslavets experienced hypertrophic conditions. Satellite data indicated eutrophic conditions for both lakes. Comparing the results from in situ and satellite data, chlorophyll a showed higher correlation (r = 0.66) and comparable results. On the other hand, significantly overestimation of suspended matter according to satellite data were found, as well weaker correlation (r = 0.57) between both methods. Remote sensing i.e. Sentinel products are emerging as a powerful tool in environmental observation. Although weather conditions could have significant impact on environmental dynamic especially in floodplain lakes, combining and comparing of different methods could improve the preciseness of the methodology as well as assessment reliability.

Assimilation of satellite data to 3D hydrodynamic model of Lake Säkylän Pyhäjärvi

2015 ◽  
Vol 71 (7) ◽  
pp. 1033-1039 ◽  
Author(s):  
Akiko Mano ◽  
Olli Malve ◽  
Sampsa Koponen ◽  
Kari Kallio ◽  
Antti Taskinen ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Time Series ◽  
Satellite Data ◽  
Suspended Matter ◽  
Concentration Field ◽  
Total Suspended Matter ◽  
Observation Data ◽  
Lake Area ◽  
Lake Surface ◽  
Spatial Differences

To analyze the applicability of direct insertion of total suspended matter (TSM) concentration field based on turbidity derived from satellite data to numerical simulation, dispersion studies of suspended matter in Lake Säkylän Pyhäjärvi (lake area 154 km2; mean depth 5.4 m) were conducted using the 3D COHERENS simulation model. To evaluate the practicality of direct insertion, five cases with different initialization frequencies were conducted: (1) every time, when satellite data were available; (2) every 10 days; (3) 20 days; (4) 30 days; and (5) control run without repeated initialization. To determine the effectiveness of initialization frequency, three methods of comparison were used: simple spatial differences of TSM concentration without biomass in the lake surface layer; averaged spatial differences between initialization data and the forecasts; and time series of TSM concentration and observation data at 1 m depth at the deepest point of the lake. Results showed that direct insertion improves the forecast significantly, even if it is applied less often.

Sign in / Sign up

Export Citation Format

Share Document