scholarly journals In vitro release of diclofenac diethylamine from gels: evaluation of generic semisolid drug products in Brazil

2013 ◽  
Vol 49 (2) ◽  
pp. 211-219 ◽  
Author(s):  
Karin Goebel ◽  
Mayumi Eliza Otsuka Sato ◽  
Dayse Fernanda de Souza ◽  
Fábio Seigi Murakami ◽  
Itamar Francisco Andreazza
Keyword(s):  
Drug Release ◽  
Generic Drug ◽  
Drug Product ◽  
In Vitro Release ◽  
Performance Testing ◽  
Vertical Diffusion ◽  
Reference Drug ◽  
Drug Products ◽  
Vitro Release

In order for the pharmacological action of a topical dermal drug product to occur, the drug must first be released from the vehicle to be available to penetrate the skin layers and reach the site of action. Drug release is mainly dependent on the characteristics of the formulation. Currently, to register a generic or a similar drug product in Brazil performance testing of topical drug products for local action is not required. In this context, this aim of this study was to evaluate the in vitro release of commercial diclofenac diethylamine gel products available on the Brazilian pharmaceutical market, using the vertical diffusion cell method. Factors which may influence the test, such as the type of membrane used, and the effect of the formulation characteristics on the diffusion rate were evaluated. Brazilian legislation currently allows generic drug products to contain excipients other than the reference drug, which may affect the drug release from the vehicle. Only one of the four generic drug products tested could be considered equivalent to the reference Cataflam Emulgel®. The cellulose acetate and polyethersulfone membranes tested were found to be interchangeable in the in vitro release studies carried out on this product.

scholarly journals Assessment of “Sameness” and/or Differences between Marketed Creams Containing Miconazole Nitrate Using a Discriminatory in vitro Release Testing (IVRT) Method

2020 ◽  
Vol 88 (1) ◽  
pp. 6
Author(s):  
Potiwa Purazi ◽  
Seeprarani Rath ◽  
Ashmita Ramanah ◽  
Isadore Kanfer
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Vertical Diffusion ◽  
Discriminatory Ability ◽  
Miconazole Nitrate ◽  
Performance Verification Test ◽  
Semi Solid ◽  
Vitro Release ◽  
Release Testing

In vitro release testing (IVRT) provides an efficient method for the evaluation of drug release from semi-solid formulations. The aim of this research was to develop and validate a discriminatory IVRT system using vertical diffusion cells (VDCs) to assess generic topical products containing miconazole nitrate (MCZ). A comprehensive approach addressing all essential suitability criteria supporting the reliability of IVRT results was applied. These include mechanical validation of the VDCs, a performance verification test (PVT), validation of the analytical method (HPLC) used to quantify the drug release and validation of the IVRT method to confirm its precision, reproducibility, discriminatory ability, and robustness. Two marketed generic products were tested and assessed in accordance with the acceptance criteria for “sameness” in the FDA’s SUPAC-SS guidance which requires that the 90% confidence interval (CI) should fall within the limits of 75%–133.33%. One product was found to be in vitro equivalent to the reference product whereas the other was not. The results confirmed the suitability of the IVRT method to accurately measure the release of MCZ from topical cream products and, importantly, demonstrated the necessary discriminatory ability to assess “sameness”/differences of dermatological creams containing MCZ. Furthermore, the developed IVRT method was able to detect differences between formulations, which may be attributed to qualitative (Q1) and quantitative (Q2) properties and the microstructure and arrangement of matter (Q3).

IN VITRO RELEASE PERFORMANCE OF METFORMIN HYDROCHLORIDE FORMULATIONS USING THE FLOW-THROUGH CELL METHOD

2020 ◽  
pp. 76-82
Author(s):  
JOSE RAUL MEDINA-LÓPEZ ◽  
FRIDA IRIANA MEDINA-MORALES ◽  
RAFAEL ALONSO GALVEZ LOMELIN ◽  
JUAN CARLOS RUIZ SEGURA ◽  
MARCELA HURTADO
Keyword(s):  
Drug Product ◽  
In Vitro Release ◽  
Dissolution Time ◽  
Metformin Hydrochloride ◽  
Reference Drug ◽  
Cell Method ◽  
Post Marketing ◽  
Flow Through ◽  
Vitro Release

Objective: The objective of this work was to evaluate the in vitro release performance of metformin hydrochloride formulations (500-mg tablets) using the hydrodynamic environment of the flow-through cell method. Results were compared with those generated by the official dissolution test (USP basket apparatus). Methods: The reference drug product and three generic formulations were tested with phosphate buffer pH 6.8 as dissolution medium. Dissolution profiles were carried out with an automated flow-through cell apparatus using laminar flow at 16 ml/min. Drug was quantified at 233 nm during 45 min. Dissolution profiles were compared with the calculation of f2 similarity factor, mean dissolution time, dissolution efficiency, t50% and t63.2%. Dissolution data were adjusted to several mathematical models such as Makoid-Banakar, Peppas-Sahlin, Weibull and Logistic. Results: With the flow-through cell method and at 45 min less than 60% of metformin hydrochloride dissolved was found, while with the USP basket apparatus, less than 75% of the drug was found. Some generic formulations showed f2>50 with both USP apparatuses, but statistical comparisons of parameters indicated significant differences between their dissolution profiles and reference. Due to variability obtained no dissolution profiles were compared by model-dependent approach. Conclusion: To demonstrate safe interchangeability between metformin hydrochloride generic formulations and reference bioequivalence studies should be performed. It is important post-marketing monitoring of the commercial formulations because health regulatory agencies of each country must ensure drug products with quality, safety, and efficacy at the lowest possible cost.

Formulation and In vitro Release Characterization of Metoprolol Succinate Extended Release Tablets

2012 ◽  
Vol 4 (4) ◽  
pp. 1537-1543
Author(s):  
Sakthikumar T ◽  
Rajendran N N ◽  
Natarajan R
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Wet Granulation ◽  
Direct Compression ◽  
Metoprolol Succinate ◽  
Extended Release Formulations ◽  
Vitro Release

The present study was aimed to develop an extended release tablet of metoprolol Succinate for the treatment of hypertension.  Four extended release formulations F1-F4 were developed using varying proportions of hydroxylpropyl-methylcellulose K100M, sodium carboxy methyl cellulose and Eudragit L30 D55 by wet granulation. Five extended release formulations F5-F9 containing HPMC K100M and HPMC 5 cps in varying concentration were developed by direct compression. The physicochemical and in vitro release characteristics of all the formulations were investigated and compared. Two formulations, F7 and F8 have shown not more 25% drug release  in 1st h, 20%-40% drug release at 4th hour, 40%-60% drug release at 8th hour and not less than 80% at 20th hour and the release pattern conform with USP specification for 24 hours extended release formulation. It can be conclusively stated that optimum concentration of HPMC K100M (58%-65%) by direct compression method can yield an extended release of metoprolol succinate for 24 hours.

Preparation, evaluation, and in vitro release of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules

2020 ◽  
pp. 1-9
Author(s):  
Yunhong Wang ◽  
Rong Hu ◽  
Yanlei Guo ◽  
Weihan Qin ◽  
Xiaomei Zhang ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Orthogonal Design ◽  
Drug Loading ◽  
In Vitro Release ◽  
Core Material ◽  
Evaluation Indexes ◽  
Vitro Release

OBJECTIVE: In this study we explore the method to prepare tanshinone self-microemulsifying sustained-release microcapsules using tanshinone self-microemulsion as the core material, and chitosan and alginate as capsule materials. METHODS: The optimal preparation technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules was determined by using the orthogonal design experiment and single-factor analysis. The drug loading and entrapment rate were used as evaluation indexes to assess the quality of the drug, and the in vitro release rate was used to evaluate the drug release performance. RESULTS: The best technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules is as follows: the concentration of alginate is 1.5%, the ratio of tanshinone self-microemulsion volume to alginate volume to chitosan mass is 1:1:0.5 (ml: ml: g), and the best concentration of calcium chloride is 2.0%. To prepare the microcapsules using this technology, the drug loading will be 0.046%, the entrapment rate will be 80.23%, and the 24-hour in vitro cumulative release rate will be 97.4%. CONCLUSION: The release of the microcapsules conforms to the Higuchi equation and the first-order drug release model and has a good sustained-release performance.

scholarly journals In vitro Release Kinetics Study of Ranolazine from Swellable Hydrophilic Matrix Tablets

1970 ◽  
Vol 8 (1) ◽  
pp. 31-38 ◽  
Author(s):  
Mohammad Nezab Uddin ◽  
Ishtiaq Ahmed ◽  
Monzurul Amin Roni ◽  
Muhammad Rashedul Islam ◽  
Mohammad Habibur Rahman ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
High Viscosity ◽  
Matrix Tablets ◽  
Release Studies ◽  
The Matrix ◽  
Vitro Release

The objective of this study was to design oral sustained release matrix tablets of Ranolazine usinghydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of formulation factors suchas polymer proportion and polymer viscosity on the release of drug. In vitro release studies were performed usingUSP type II apparatus (paddle method) in 900 mL of 0.1N HCl at 100 rpm for 12 hours. The release kinetics wasanalyzed using the zero-order, first order, Higuchi and Korsmeyer-Peppas equations to explore and explain themechanism of drug release from the matrix tablets. In vitro release studies revealed that the release rate decreasedwith increase in polymer proportion and viscosity grade. Mathematical analysis of the release kinetics indicated thatthe nature of drug release from the matrix tablets was dependent on drug diffusion and polymer relaxation andtherefore followed non-Fickian or anomalous release. The developed controlled release matrix tablets of Ranolazineprepared with high viscosity HPMC extended release up to 12 hours.Key words: Ranolazine; Sustained release; Methocel E50 Premium LV; Methocel K100LV CR; Methocel K4M CR;Methocel K15M CR.DOI: 10.3329/dujps.v8i1.5333Dhaka Univ. J. Pharm. Sci. 8(1): 31-38, 2009 (June)

scholarly journals FABRICATION OF NANO CLAY INTERCALATED POLYMERIC MICROBEADS FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 206-215
Author(s):  
DHARMENDER PALLERLA ◽  
SUMAN BANOTH ◽  
SUNKARI JYOTHI
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Simulated Gastric Fluid ◽  
Release Mechanism ◽  
Release Studies ◽  
Swelling Studies ◽  
Vitro Release

Objective: The objective of this study was to formulate and evaluate the Curcumin (CUR) encapsulated sodium alginate (SA)/badam gum (BG)/kaolin (KA) microbeads for controlled drug release studies. Methods: The fabricated microbeads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Dynamic swelling studies and in vitro release kinetics were performed in simulated intestinal fluid (pH 7.4) and simulated gastric fluid (pH 1.2) at 37 °C. Results: FTIR confirms the formation of microbeads. DSC studies confirm the polymorphism of CUR in drug loaded microbeads which indicate the molecular level dispersion of the drug in the microbeads. SEM studies confirmed the microbeads are spherical in shape with wrinkled and rough surfaces. XRD studies reveal the molecular dispersion of CUR and the presence of KA in the developed microbeads. In vitro release studies and swelling studies depend on the pH of test media, which might be suitable for intestinal drug delivery. The % of drug release values fit into the Korsmeyer-Peppas equation and n values are obtained in the range of 0.577-0.664, which indicates that the developed microbeads follow the non-Fickian diffusion drug release mechanism. Conclusion: The results concluded that the CUR encapsulated microbeads are potentially good carriers for controlled drug release studies.

scholarly journals DESIGN AND IN VITRO EVALUATION OF EXTENDED RELEASE TABLET OF NATEGLINIDE

2018 ◽  
Vol 8 (5-s) ◽  
pp. 235-239
Author(s):  
NILESH M MAHAJAN ◽  
Kalyanee Wanaskar ◽  
Yogesh Bhutada ◽  
Raju Thenge ◽  
Vaibhav Adhao
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
In Vitro Release ◽  
Matrix Tablet ◽  
Direct Compression ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Tablet Properties ◽  
Vitro Release

The aim of present study is to formulate and evaluate extended release matrix tablet of Nateglinide by direct compression method using different polymer like HPMC K4 and HPMC K15. Matrix tablet of nateglidine were prepared in combination with the polymer HPMC K4, HPMC K15, along with the excipients and the formulations were evaluated for tablet properties and in vitro drug release studies. Nateglinide matrix tablet prepared by using polymer such as HPMC K4 and HPMC K15,  it was found that HPMC K15 having higher viscosity as compare to HPMC K4 therefore different concentration of polymer were studied to extend the drug release up to 12 h. The tablets of Nateglinide prepared by direct compression had acceptable physical characteristics and satisfactory drug release. The study demonstrated that as far as the formulations were concerned, the selected polymers proved to have an acceptable flexibility in terms of in-vitro release profile. In present the study the percent drug release for optimize batch was found to 94.62%.  Hence it can be conclude that Nateglinide extended release matrix tablet can prepared by using HPMC. The swollen tablet also maintains its physical integrity during the drug release study Keywords: Tablet, in-vitro drug release, Nateglinide, HPMC

scholarly journals DESIGN AND STATISTICAL OPTIMIZATION OF A BILAYERED TABLET OF METOPROLOL SUCCINATE SUSTAINED RELEASE AND ATORVASTATIN CALCIUM IMMEDIATE RELEASE: ONCE A DAY FORMULATION IN THE MANAGEMENT OF HYPERTENSION

2018 ◽  
Vol 11 (3) ◽  
pp. 293
Author(s):  
Pearl Pires Dighe ◽  
Tank Hm
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
In Vitro Release ◽  
Blood Cholesterol ◽  
Fixed Dose ◽  
Content Uniformity ◽  
Metoprolol Succinate ◽  
Atorvastatin Calcium ◽  
Vitro Release

 Objective: The current study involves the fabrication of oral bilayer matrix designs of a combination of two drugs, metoprolol succinate and atorvastatin calcium, the optimization of their in vitro release and characterization using the design expert software. Metoprolol succinate, a β1- selective adrenergic receptor blocking agent, is used in the management of hypertension has a half-life of approximately 4–5 h; thus, there is the need to use extended-release formulation for prolonged action. Atorvastatin is a hydroxymethylglutaryl-coenzyme A reductase inhibitor, an antilipidemic, used to lower blood cholesterol. The rationale for this fixed-dose combination is to coadminister two drugs acting by different mechanisms of action together, reduce dosing frequency, and increase patient compliance.Methods: A 32 factorial design was selected to analyze the effect of critical factors, polymer concentration of Kollidon sustained release (SR), and Eudragit RS and their interaction on the in vitro release of the SR part containing metoprolol succinate. The drug release at 2 h (Q2), 8 h (Q8), and 20 h (Q20) was taken as responses. The blends of both layers were prepared, evaluated for precompression characteristics, and compressed by direct compression. The compressed bilayer tablets were evaluated for their hardness, weight variation, friability, content uniformity, diameter, and in vitro release.Result and Conclusion: The release profile indicates Higuchi’s kinetics. Contour and surface response plots show significant interaction among the formulation variables. Formulation MS06 containing 70 mg Kollidon SR and 10 mg Eurdragit RS was found to be the optimized formulation, controlling the drug release for a 24 h period.

Sign in / Sign up

Export Citation Format

Share Document