Effect of Separate and Combined Treatments of Herbicides on Weed Control and Corn (Zea mays) Yield

2006 ◽  
Vol 20 (3) ◽  
pp. 640-645 ◽  
Author(s):  
Ehsan Bijanzadeh ◽  
Hossein Ghadiri
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Field Studies ◽  
Corn Yield ◽  
Weed Biomass ◽  
Field Bindweed ◽  
Herbicide Treatments ◽  
Biomass Reduction ◽  
Corn Grain ◽  
Corn Grain Yield

Field studies were conducted at Shiraz, Iran, during 2000 and 2001 to investigate the effect of separate and combined herbicide treatments on weed control and corn yield. Separate and combined herbicide treatments included 14 combinations applied at two rates. Herbicides reduced weed biomass compared with the weedy check. In both years, maximum reduction in weed biomass was observed with atrazine plus alachlor at 1 + 2.44 and 1.5 + 1.92 kg ai/ha and minimum reduction in weed biomass was observed with rimsulfuron at 0.02 and 0.04 kg/ha. In 2000 and 2001, 2,4-D plus MCPA at 0.36 + 0.31 and 0.54 + 0.46 kg/ha, and alachlor plus 2,4-D plus MCPA at 1.92 + 0.54 + 0.46 kg/ha, and 2.44 + 0.36 + 0.31 kg/ha, controlled 80 to 100% of field bindweed and rimsulfuron at 0.02 and 0.04 kg/ha controlled 17 to 70% of field bindweed. All herbicide treatments controlled redroot pigweed 60 to 100%. In 2000, at 6 and 17 WAP, minimum biomass reduction of Chinese-lantern-plant was observed with 2,4-D plus MCPA at 0.36 + 0.31 and 0.54 + 0.46 kg/ha, and primisulfuron plus prosulfuron at 0.02 + 0.02 and 0.03 + 0.03 kg/ha. Rimsulfuron plus primisulfuron plus prosulfuron at 0.02 + 0.03 + 0.03 and 0.04 + 0.02 + 0.02 kg/ha reduced johnsongrass biomass 96 to 100% and the efficacy of rimsulfuron increased when tank mixed with primisulfuron plus prosulfuron. Results of both years showed that all herbicide treatments increased corn grain yield as compared with the weedy check. Maximum corn grain yield was obtained with combinations of atrazine plus alachlor at 1 + 2.44 and 1.5 + 1.92 kg/ha.

Application Timing for Weed Control in Corn (Zea mays) with Dicamba Tank Mixtures

1997 ◽  
Vol 11 (3) ◽  
pp. 602-607 ◽  
Author(s):  
Eric Spandl ◽  
Thomas L. Rabaey ◽  
James J. Kells ◽  
R. Gordon Harvey
Keyword(s):  
Zea Mays ◽  
Grain Yield ◽  
Weed Control ◽  
Field Studies ◽  
Corn Yield ◽  
Application Timing ◽  
Common Lambsquarters ◽  
Giant Foxtail ◽  
Corn Grain ◽  
Corn Grain Yield

Optimal application timing for dicamba–acetamide tank mixes was examined in field studies conducted in Michigan and Wisconsin from 1993 to 1995. Dicamba was tank mixed with alachlor, metolachlor, or SAN 582H and applied at planting, 7 d after planting, and 14 d after planting. Additional dicamba plus alachlor tank mixes applied at all three timings were followed by nicosulfuron postemergence to determine the effects of noncontrolled grass weeds on corn yield. Delaying application of dicamba–acetamide tank mixes until 14 d after planting often resulted in lower and less consistent giant foxtail control compared with applications at planting or 7 d after planting. Corn grain yield was reduced at one site where giant foxtail control was lower when application was delayed until 14 d after planting. Common lambsquarters control was excellent with 7 or 14 d after planting applications. At one site, common lambsquarters control and corn yield was reduced by application at planting. Dicamba–alachlor tank mixes applied 7 d after planting provided similar weed control or corn yield, while at planting and 14 d after planting applications provided less consistent weed control or corn yield than a sequential alachlor plus dicamba treatment or an atrazine-based program.

scholarly journals Corn yield response to weed and fall armyworm controls

2010 ◽  
Vol 28 (1) ◽  
pp. 103-111 ◽  
Author(s):  
M.S. Lima ◽  
P.S.L. Silva ◽  
O.F. Oliveira ◽  
K.M.B. Silva ◽  
F.C.L. Freitas
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Block Design ◽  
Fall Armyworm ◽  
Yield Response ◽  
Corn Yield ◽  
Water Control ◽  
Neem Extract ◽  
Corn Grain ◽  
Corn Grain Yield

The interference imposed the by weeds on corn decreases practically all vegetative characteristics. As consequence, the green ear and grain yield are also reduced. Losses due to the fall armyworm (Spodoptera frugiperda) attack can reduce corn grain yield up to 34%. In general, weed and insect control issues are addressed separately in research papers. Nevertheless, interaction between weeds and insects may exist. This study aimed to evaluate green ear and corn grain yield response to weed and fall armyworm control. A completely randomized block design with split-plots and five replicates was adopted. Corn cultivar AG 1051 was grown under weedy conditions or with control by hand hoeings performed at 20 and 40 days after planting. Fall armyworm control (applied to subplots) was performed with sprays of water (control), deltamethrin (5g active ingredient ha-1); neem oil, at 0.5% (diluted in water), and neem leaf extract at 5%. Each product was sprayed three times, at seven-day intervals, starting at the 7th day after planting, using 150 L ha-1 of the tank solution. Dry mass of the above-ground part, internode diameter, leaf length, leaf width, leaf area, green ear yield and grain yield of corn were reduced due to the lack of weed control. Fall armyworm control in the weeded plots did not influence green ear yield and grain yield, except green mass of marketable, husked ears, which was reduced when the caterpillar was not controlled. Without weed control, neem extracts and deltamethrin sprays provided highest yields of number and total weight of green ears with husks, number and weight of marketable ears with husks and number of marketable ears without husks. The best results for husked ear mass and for grain yield were obtained with neem extract and deltamethrin, respectively.

Effect of cereal rye and canola on winter and summer annual weed emergence in corn

2020 ◽  
Vol 34 (6) ◽  
pp. 787-793
Author(s):  
Stephanie A. DeSimini ◽  
Kevin D. Gibson ◽  
Shalamar D. Armstrong ◽  
Marcelo Zimmer ◽  
Lucas O.R. Maia ◽  
...  
Keyword(s):  
Grain Yield ◽  
Cover Crops ◽  
Cover Crop ◽  
Corn Yield ◽  
Crop Species ◽  
Weed Biomass ◽  
Cereal Rye ◽  
Giant Ragweed ◽  
Corn Grain ◽  
Corn Grain Yield

AbstractField experiments were conducted in 2017 and 2018 at two locations in Indiana to evaluate the influence of cover crop species, termination timing, and herbicide treatment on winter and summer annual weed suppression and corn yield. Cereal rye and canola cover crops were terminated early or late (2 wk before or after corn planting) with a glyphosate- or glufosinate-based herbicide program. Canola and cereal rye reduced total weed biomass collected at termination by up to 74% and 91%, in comparison to fallow, respectively. Canola reduced horseweed density by up to 56% at termination and 57% at POST application compared to fallow. Cereal rye reduced horseweed density by up to 59% at termination and 87% at POST application compared to fallow. Canola did not reduce giant ragweed density at termination in comparison to fallow. Cereal rye reduced giant ragweed density by up to 66% at termination and 62% at POST application. Termination timing had little to no effect on weed biomass and density reduction in comparison to the effect of cover crop species. Cereal rye reduced corn grain yield at both locations in comparison to fallow, especially for the late-termination timing. Corn grain yield reduction up to 49% (4,770 kg ha–1) was recorded for cereal rye terminated late in comparison to fallow terminated late. Canola did not reduce corn grain yield in comparison to fallow within termination timing; however, late-terminated canola reduced corn grain yield by up to 21% (2,980 kg ha–1) in comparison to early-terminated fallow. Cereal rye can suppress giant ragweed emergence, whereas canola is not as effective at suppressing large-seeded broadleaves such as giant ragweed. These results also indicate that early-terminated cover crops can often result in higher corn grain yields than late-terminated cover crops in an integrated weed management program.

Influence of Weed Control on Weed Population in Ridge-till Corn (Zea mays)

Weed Science ◽  
1996 ◽  
Vol 44 (4) ◽  
pp. 903-910
Author(s):  
Gail A. Wicks ◽  
Robert G. Wilson ◽  
Garold W. Mahnken ◽  
Gordon E. Hanson
Keyword(s):  
Zea Mays ◽  
Grain Yield ◽  
Weed Control ◽  
Field Studies ◽  
Grain Yields ◽  
Common Lambsquarters ◽  
Weed Population ◽  
Green Foxtail ◽  
Herbicide Treatments ◽  
Corn Grain

Field studies were conducted to determine the influence of annual herbicide treatments plus cultivation on weed populations and corn yields in ridge-till corn during a 3-yr period at Mitchell, NE, and a 7-yr period at North Platte, NE. When the experiment was initiated at North Platte, no weeds were present before corn planting. It took 4 yr before triazine-resistant kochia became a problem before corn planting in plots treated with atrazine, but these were controlled by other operations prior to corn harvest. In the cultivated check, green foxtail densities before harvest increased from 0 in 1985 to 32 plants 100 m−2in 1991. Annual applications of dicamba plus 2,4-D 10 d early preplant followed by cultivation controlled triazine-resistant kochia and velvetleaf, but common lambsquarters, nightshade species, and green foxtail increased. Volunteer corn was controlled with cultivation. After 3 yr at Mitchell, the annual weed population increased 10-fold in the cultivated check. Thus, corn yields were reduced 64% with two cultivations compared with an annual early preplant application of dicamba plus 2,4-D followed by alachlor plus cyanazine PRE and two cultivations. With two cultivations under low annual weed populations at North Platte, grain yield from the cultivated check treatment was not different from annual treatments of herbicides after 7 yr. Metolachlor plus atrazine occasionally caused a reduction in corn grain yields.

Cultivation and Herbicides for Weed Control in Corn

Weed Science ◽  
1968 ◽  
Vol 16 (2) ◽  
pp. 232-234 ◽  
Author(s):  
K. P. Buchholtz ◽  
R. E. Doersch
Keyword(s):  
Zea Mays ◽  
Grain Yield ◽  
Weed Control ◽  
Corn Yield ◽  
Triazine Herbicides ◽  
Grain Yields ◽  
Yield Increase ◽  
Weed Growth ◽  
Corn Grain ◽  
Corn Grain Yield

Corn (Zea mays L.) plots receiving broadcast spray applications of triazine herbicides without cultivation yielded as much as plots receiving the standard two cultivations for weed control. One cultivation resulted in an average 6% increase in corn grain yield on herbicide treated plots. This yield increase probably was due to improved weed control. Weed growth reduced grain yields an average of 1.23 bu/A for each 100 lb/A of dry weeds. In some experiments, increases in corn yield due to improved weed control by cultivation on plots treated with herbicides were less than increases expected based on weed growth reductions. This disparity may have been due to injury to the corn by cultivation.

Rimsulfuron for Postemergence Weed Control in Corn in Humid Tropical Environments of Nigeria

2007 ◽  
Vol 21 (4) ◽  
pp. 977-981 ◽  
Author(s):  
David Chikoye ◽  
Udensi E. Udensi ◽  
A. Fontem Lum ◽  
Friday Ekeleme
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Field Studies ◽  
Small Scale ◽  
International Institute ◽  
Tropical Environments ◽  
Perennial Weeds ◽  
Dry Biomass ◽  
Corn Grain ◽  
Corn Grain Yield

Cogongrass and guineagrass are serious perennial weeds in small-scale farms in lowland subhumid zones of West Africa. Field studies were conducted in 2002 and 2003 at two sites in Ibadan, Nigeria [Ijaye and the International Institute of Tropical Agriculture (IITA)], to evaluate the effect of rimsulfuron on weed communities dominated by cogongrass and guineagrass in corn. At both sites, treatments were rimsulfuron dosages of 0 (nontreated control), 10, 20, 30, 40, 50, 60, 70, and 80 g ai/ha. Rimsulfuron did not cause any visible phytotoxicity on the corn at any dosage at either site. There was a rapid increase in weed control as the dosage of rimsulfuron increased from 0 to 20 g/ha. Weed control was not improved at rates higher than 20 g/ha. Rimsulfuron was very effective against sedges,Ipomoea involucrata, Bengal dayflower, gulf leafflower, old-world diamond-flower, and wild jute providing more than 80% control at dosages between 10 and 20 g/ha at Ijaye. Rimsulfuron was less effective for cogongrass, with a maximum of only 38% control observed. At IITA, the herbicide was very effective against guineagrass, Bengal dayflower, nodeweed, coat buttons, redfruit passionflower, and waterleaf; all of which were controlled more than 70% with any rate of rimsulfuron. Regression analysis showed that the dosage of rimsulfuron required to reduce shoot dry biomass by 70% was 5 g/ha for guineagrass and 35 g/ha for cogongrass at 3 wk after treatment (WAT). At crop maturity, the dosage of rimsulfuron required to reduce shoot dry biomass by 70% was 43 g/ha for guineagrass and 200 g/ha for cogongrass. The dry biomass of cogongrass and guineagrass was higher at crop harvest than at 2 WAT regardless of herbicide dosage. Corn grain yield was 1.8 times higher at IITA than at Ijaye. At both sites, corn grain yield increased with increased herbicide dosage. Maximum corn grain yields were obtained at a rimsulfuron dosage of 20 g/ha.

Suppression of Annual Ryegrass in Corn with Nicosulfuron

2019 ◽  
Vol 33 (1) ◽  
pp. 173-177 ◽  
Author(s):  
Taïga B. Cholette ◽  
Nader Soltani ◽  
David C. Hooker ◽  
Darren E. Robinson ◽  
Peter H. Sikkema
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Cover Crop ◽  
Control Period ◽  
Field Studies ◽  
Corn Yield ◽  
Annual Ryegrass ◽  
Yield Losses ◽  
Yield Responses ◽  
Corn Grain

AbstractField studies were conducted to determine the possible rate and timing of nicosulfuron to suppress annual ryegrass (ARG) seeded as a cover crop at the time of corn planting without affecting corn performance near Ridgetown, ON, Canada, in 2016 and 2017. Nicosulfuron was applied at rates from 0.8 to 50 g ai ha–1when the ARG was at the two- to three- or four- to five-leaf stages, or approximately 3 or 4 wk after emergence of both corn and ARG. There were no differences between the two application timings in grain yield responses or ARG suppression. As the rate of nicosulfuron increased from 0.8 to 50 g ai ha–1, ARG was suppressed 6% to 76% and 5% to 96%, at 1 and 4 wk after application (WAA), respectively. At 4 WAA, ARG biomass decreased from 29 to 1 g m–2as the rate of nicosulfuron increased from 0.8 to 50 g ai ha–1, compared to 36 g m–2in the untreated control. Where nicosulfuron was not applied to ARG, grain corn yield was reduced by 6% compared to the ARG-free control; similar effects on corn yield were observed with nicosulfuron at the lowest rate applied at 0.8 g ai ha–1. Grain corn yield was reduced by 2.5% with the application of nicosulfuron at 25 g ai ha–1(label rate for corn) compared to no ARG control, but this was not statistically significant. This study identified rates of nicosulfuron that suppressed ARG when emerged approximately the same day as corn, but there was evidence that grain corn yields were lowered because of interference, possibly during the critical weed control period. Based on this study, an ARG cover crop should not be seeded at the same time as corn unless one is willing to accept a risk for corn grain yield losses for the sake of the cover crop.

scholarly journals Interactions of Nitrogen Source and Rate and Weed Removal Timing Relative to Nitrogen Content in Corn and Weeds and Corn Grain Yield

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Alexandra M. Knight ◽  
Wesley J. Everman ◽  
David L. Jordan ◽  
Ronnie W. Heiniger ◽  
T. Jot Smyth
Keyword(s):  
Grain Yield ◽  
Weed Management ◽  
Management Strategies ◽  
Field Studies ◽  
Weed Species ◽  
Weed Interference ◽  
Coated Urea ◽  
N Fertility ◽  
Corn Grain ◽  
Corn Grain Yield

Adequate fertility combined with effective weed management is important in maximizing corn (Zea mays L.) grain yield. Corn uptake of nitrogen (N) is dependent upon many factors including weed species and density and the rate and formulation of applied N fertilizer. Understanding interactions among corn, applied N, and weeds is important in developing management strategies. Field studies were conducted in North Carolina to compare corn and weed responses to urea ammonium nitrate (UAN), sulfur-coated urea (SCU), and composted poultry litter (CPL) when a mixture of Palmer amaranth (Amaranthus palmeri S. Wats.) and large crabgrass (Digitaria sanguinalis L.) was removed with herbicides at heights of 8 or 16 cm. These respective removal timings corresponded with 22 and 28 days after corn planting or V2 and V3 stages of growth, respectively. Differences in N content in above-ground biomass of corn were noted early in the season due to weed interference but did not translate into differences in corn grain yield. Interactions of N source and N rate were noted for corn grain yield but these factors did not interact with timing of weed control. These results underscore that timely implementation of control tactics regardless of N fertility management is important to protect corn grain yield.

Response of Johnsongrass (Sorghum halepense) and Imidazolinone-Resistant Corn (Zea mays) to AC 263,222

1999 ◽  
Vol 13 (3) ◽  
pp. 484-488 ◽  
Author(s):  
John W. Wilcut ◽  
John S. Richburg ◽  
F. Robert Walls
Keyword(s):  
Zea Mays ◽  
Weed Control ◽  
Untreated Control ◽  
Field Studies ◽  
Sorghum Halepense ◽  
Corn Yield ◽  
Redroot Pigweed ◽  
Herbicide Treatments ◽  
Ac 263,222 ◽  
Large Crabgrass

Field studies were conducted in 1992 and 1993 to evaluate AC 263,222 applied postemergence (POST) alone and as a mixture with atrazine or bentazon for weed control in imidazolinone-resistant corn. Nicosulfuron alone and nicosulfuron plus atrazine were also evaluated. Herbicide treatments were applied following surface-banded applications of two insecticides, carbofuran or terbufos at planting. Crop sensitivity to POST herbicides, corn yield, and weed control was not affected by insecticide treatments. AC 263,222 at 36 and 72 g ai/ha controlled rhizomatous johnsongrass 88 and 99%, respectively, which was equivalent to nicosulfuron applied alone or with atrazine. AC 263,222 at 72 g/ha controlled large crabgrass 99% and redroot pigweed 100%, and this level of control exceeded that obtained with nicosulfuron alone. AC 263,222 at 72 g/ha controlled sicklepod and morningglory species 99 and 98%, respectively. Nicosulfuron alone or with atrazine controlled these two species less than AC 263,222 at 72 g/ha. Addition of bentazon or atrazine to AC 263,222 did not improve control of any species compared with the higher rate of AC 263,222 at 72 g/ha applied alone. Corn yield increased over the untreated control when POST herbicide(s) were applied, but there were no differences in yield among herbicide treatments.

Evaluation of Application Program and Timing in Herbicide-Resistant Corn

2012 ◽  
Vol 26 (4) ◽  
pp. 617-621 ◽  
Author(s):  
Laura E. Lindsey ◽  
Wesley J. Everman ◽  
Andrew J. Chomas ◽  
James J. Kells
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Herbicide Application ◽  
Application Timing ◽  
Common Lambsquarters ◽  
Giant Foxtail ◽  
Residual Herbicide ◽  
Herbicide Programs ◽  
Corn Grain ◽  
Corn Grain Yield

Field studies were conducted from 2007 to 2009 in East Lansing, MI to evaluate three residual herbicide programs, three POST herbicide application timings, and two POST herbicides in glyphosate- and glufosinate-resistant corn. Herbicide programs included a residual PRE-applied herbicide followed by (fb) POST application (residual fb POST), a residual herbicide tank-mixed with a POST herbicide (residual + POST), and a nonresidual POST. Three POST herbicide application timings included early POST (EP), mid-POST (MP), and late POST (LP) at an average corn growth stage of V3/V4, V4/V5, and V5/V6, respectively. The two POST herbicides evaluated were glyphosate and glufosinate. Control of common lambsquarters and giant foxtail was evaluated 28 d after the LP application. Glyphosate often provided greater weed control than glufosinate. The LP application resulted in greater giant foxtail control compared with the EP application timing, which may be attributed to control of late-emerging weeds. The EP application timing improved common lambsquarters control compared with the LP application timing. The residual + POST program resulted in greater weed control compared with the residual fb POST program in all years. The effect of residual herbicide program, POST herbicide, and POST application timing on corn grain yield varied by year. In 2007, the use of glyphosate resulted in higher grain yield compared with glufosinate. In 2008, corn grain yield was the highest in the PRE fb POST program and with POST applications at EP and MP. To provide the most consistent weed control and minimize the likelihood of grain yield reductions, a PRE fb POST program applied at EP or MP is recommended.

Sign in / Sign up

Export Citation Format

Share Document