NONLINEAR PHENOMENA IN LASER-MATERIAL INTERACTIONS

2005 ◽  
Vol 14 (14) ◽  
pp. 419-438
Author(s):  
Jon P. Longtin
Author(s):  
Ramin Sattari ◽  
Stephan Barcikowski ◽  
Thomas Püster ◽  
Andreas Ostendorf ◽  
Heinz Haferkamp

2021 ◽  
Vol 33 (1) ◽  
pp. 012019
Author(s):  
Jonathan Schaible ◽  
Luis Andrea Hau ◽  
David Weber ◽  
Thomas Schopphoven ◽  
Constantin Häfner ◽  
...  

Author(s):  
Babak Soltani ◽  
Faramarz Hojati ◽  
Amir Daneshi ◽  
Bahman Azarhoushang

AbstractUnderstanding the laser ablation mechanism is highly essential to find the effect of different laser parameters on the quality of the laser ablation. A mathematical model was developed in the current investigation to calculate the material removal rate and ablation depth. Laser cuts were created on the workpiece with different laser scan speeds from 1 to 10 mm s−1 by an ultrashort pulse laser with a wavelength of about 1000 nm. The calculated depths of laser cuts were validated via practical experiments. The variation of the laser power intensity on the workpiece’s surface during laser radiation was also calculated. The mathematical model has determined the laser-material interaction mechanism for different laser intensities. The practical sublimation temperature and ablated material temperature during laser processing are other data that the model calculates. The results show that in laser power intensities (IL) higher than 1.5 × 109 W cm−2, the laser-material interaction is multiphoton ionisation with no effects of thermal reaction, while in lower values of IL, there are effects of thermal damages and HAZ adjacent to the laser cut. The angle of incidence is an essential factor in altering incident IL on the surface of the workpiece during laser processing, which changes with increasing depth of the laser cut.


Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 183
Author(s):  
Xing Zhu ◽  
David R. Bacon ◽  
Julien Madéo ◽  
Keshav M. Dani

The transient terahertz (THz) pulse with high peak field has become an important tool for matter manipulation, enabling many applications such as nonlinear spectroscopy, particle acceleration, and high harmonic generation. Among the widely used THz generation techniques, optical rectification in lithium niobate (LN) has emerged as a powerful method to achieve high fields at low THz frequencies, suitable to exploring novel nonlinear phenomena in condensed matter systems. In this review, we focus on introducing single- to few-cycle THz generation in LN, including the basic principles, techniques, latest developments, and current limitations. We will first discuss the phase matching requirements of LN, which leads to Cherenkov-like radiation, and the tilted pulse front (TPF) technique. Emphasis will be put on the TPF technique, which has been shown to improve THz generation efficiency, but still has many limitations. Different geometries used to produce continuous and discrete TPF will be systematically discussed. We summarize the advantages and limitations of current techniques and future trends.


Sign in / Sign up

Export Citation Format

Share Document