CONTROL OF THE EVAPORATION IN A PLASMA FURNACE FOR FERROSILICON DUST TREATMENT

Author(s):  
F. Petit ◽  
Alain Grimaud ◽  
C. Trassy ◽  
Pierre Fauchais
Insects ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 443
Author(s):  
Salehe Abbar ◽  
Changlu Wang ◽  
Richard Cooper

Bed bug resistance to commonly used pesticide sprays has led to exploring new pesticides and other strategies for bed bug management. Non-chemical methods are effective in bed bug management; however, they do not provide residual protection. Compared to insecticide sprays, dust formulations are considered to provide longer residual control. We evaluated two bed bug management programs in apartment buildings. A building-wide inspection was initially conducted to identify bed bug infested apartments. Selected apartments were divided into two treatment groups: non-chemical plus silica gel dust treatment (10 apartments) and non-chemical treatment (11 apartments). After initial treatment, apartments were re-visited monthly for up to 6 months. During each visit, the total bed bug count per apartment was obtained by examining interceptor traps placed in the apartments and conducting a visual inspection. Mean bed bug count was reduced by 99% and 89% in non-chemical plus silica gel dust and non-chemical treatment, respectively. Non-chemical plus silica gel dust treatment caused significantly higher bed bug count reduction than the non-chemical treatment at 6 months. Bed bugs were eradicated from 40% and 36% of apartments treated with non-chemical plus silica gel dust treatment and non-chemical treatment, respectively.


2021 ◽  
Vol 2119 (1) ◽  
pp. 012036
Author(s):  
A S Anshakov ◽  
V.A. Faleev ◽  
P V Domarov

Abstract Mathematical modeling of a part of a mine plasma electric furnace for waste gasification is presented. In model calculations, the study of the effect of additional resistive heating as an in-furnace process of drying waste was carried out. In the course of modeling, the electrical resistance of the waste at natural moisture was taken into account. A study was carried out to identify the uniform release of energy inside the waste batch in the drying zone with different connections of the electrodes and the type of current.


Author(s):  
C. Lelievre ◽  
H. Baas ◽  
C.A. Pickles ◽  
J.M. Toguri

2015 ◽  
Vol 1122 ◽  
pp. 225-228
Author(s):  
Tomáš Melichar ◽  
Dalibor Konečný ◽  
Jiří Bydžovský ◽  
Miroslav Vacula

The article presents results of the research focused on suitability assessment of separated dust from formatting and grinding of cement-bonded chipboards to modify their composition. The attention was paid to dust treatment, i.e. milling and sorting. The dust was applied to chipboards in amounts of 5 and 10%. Formulas with water-cement ratio 0.60 and 0.65 were prepared. The influence of sorted dust was subsequently evaluated using setting of selected material properties. In particular the bending strength and tensile strength perpendicular to plate plane were monitored including the influence of frost on these characteristics.


Metallurgist ◽  
1975 ◽  
Vol 19 (7) ◽  
pp. 509-511
Author(s):  
A. D. Pilipchatin ◽  
I. P. Bas'yas ◽  
V. D. Azbukin ◽  
V. I. Klimov ◽  
M. I. Flerova
Keyword(s):  

Author(s):  
Gui Qing Wu ◽  
He Ping Li ◽  
Cheng Yu Bao ◽  
Xi Chen ◽  
Toru Iwao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document