Measuring the Focal Spot Diameter of Laser Radiation by a Thin-Wire Bolometer

A monolithic, polycapillary, x-ray optic was adapted to a laboratory-based x-ray microprobe to evaluate the potential of the optic for x-ray micro fluorescence analysis. The polycapillary was capable of collecting x-rays over a 6 degree angle from a point source and focusing them to a spot approximately 40 µm diameter. The high intensities expected from this capillary should be useful for determining and mapping minor to trace elements in materials. Fig. 1 shows a sketch of the capillary with important dimensions.The microprobe had previously been used with straight and with tapered monocapillaries. Alignment of the monocapillaries with the focal spot was accomplished by electromagnetically scanning the focal spot over the beveled anode. With the polycapillary it was also necessary to manually adjust the distance between the focal spot and the polycapillary.The focal distance and focal spot diameter of the polycapillary were determined from a series of edge scans.

Download Full-text

Improving the efficiency of the SLM-process by adjusting the focal spot diameter of the laser beam

The Paton Welding Journal ◽

10.37434/tpwj2021.05.03 ◽

2021 ◽

Vol 2021 (5) ◽

pp. 18-23

Author(s):

S.V. Adjamskyi ◽

◽

G.A. Kononenko ◽

R.V. Podolskyi ◽

◽

...

Keyword(s):

Laser Beam ◽

Focal Spot ◽

Spot Diameter ◽

Focal Spot Diameter

Download Full-text

Diffractive phase element for shrinking focal spot diameter: Design, fabrication, and application to laser beam lithography

Optical Review ◽

10.1007/bf02931729 ◽

2001 ◽

Vol 8 (6) ◽

pp. 416-421

Author(s):

Yusuke Ogura ◽

Jun Tanida ◽

Yoshiki Ichioka ◽

Yoshiaki Mokuno ◽

Katsunori Matsuoka

Keyword(s):

Laser Beam ◽

Focal Spot ◽

Spot Diameter ◽

Diffractive Phase Element ◽

Focal Spot Diameter

Download Full-text

Laser-induced cratering of a 3DCC material at mesoscale: Experiments and simulations

EPJ Web of Conferences ◽

10.1051/epjconf/201818301028 ◽

2018 ◽

Vol 183 ◽

pp. 01028

Author(s):

Vincent Jaulin ◽

David Hébert ◽

Bertrand Aubert ◽

Jean-Luc Rullier ◽

Frédéric Malaise ◽

...

Keyword(s):

Composite Material ◽

Composite Materials ◽

Dynamic Behaviour ◽

Focal Spot ◽

Dynamic Pressure ◽

Dynamic Strength ◽

Mesoscopic Scale ◽

Spot Diameter ◽

Laser Facility ◽

Focal Spot Diameter

This study concerns the damaging of a 3-Dimension Carbon/Carbon (3DCC) composite material under dynamic loading. Experiments were performed with a laser facility delivering energies between 13 and 40 J with 100 nanoseconds pulse duration. The focal spot diameter was 250 μm, leading to dynamic pressure up to 10 GPa. The focal spot being smaller than the size of the composite components, it allows us to study the dynamic behaviour of the material at mesoscopic scale. The dynamic process of this cratering is then investigated via 3D numerical simulations, and a Johnson-Holmquist model is proposed. It appears that comparison of simulations with experimental results is useful to identify the dynamic strength of individual components of composite materials.

Download Full-text

Laser and target experiments on KrF GARPUN laser installation at FIAN

Laser and Particle Beams ◽

10.1017/s0263034699171064 ◽

1999 ◽

Vol 17 (1) ◽

pp. 69-88 ◽

Cited By ~ 8

Author(s):

V.D. ZVORYKIN ◽

I.G. LEBO

Keyword(s):

Inertial Confinement Fusion ◽

Focal Spot ◽

Laser Pulses ◽

Inertial Confinement ◽

Power Laser ◽

Spot Diameter ◽

Confinement Fusion ◽

Short Laser Pulses ◽

Focal Spot Diameter ◽

Laser Installation

Multistage, e-beam-pumped, 100 J-class KrF laser installation “GARPUN” is described with the emphases to high-power laser beam control and target irradiation experiments. The ablation pressures in the megabar range were measured and hydrodynamic flow was investigated both experimentally and by numerical simulations for laser intensities up to 5×1012 W/cm2, pulse duration of 100 ns, and focal spot diameter 150 μm. Graphite-diamond phase transformation under laser loading was observed by dynamic and Raman scattering methods. Some approaches to the fast ignition inertial confinement fusion, using the simultaneous amplification of long and short laser pulses in KrF drivers, are considered.

Download Full-text

Influence of focal spot diameter and beam oscillation on the process efficiency of laser beam welding utilizing a direct diode laser

Procedia CIRP ◽

10.1016/j.procir.2018.08.149 ◽

2018 ◽

Vol 74 ◽

pp. 466-469 ◽

Cited By ~ 1

Author(s):

Kerstin Schaumberger ◽

Vincent Mann ◽

Michael Mödl ◽

Konstantin Hofmann ◽

Stefan Stein ◽

...

Keyword(s):

Laser Beam ◽

Diode Laser ◽

Focal Spot ◽

Laser Beam Welding ◽

Process Efficiency ◽

Spot Diameter ◽

Focal Spot Diameter ◽

Beam Oscillation

Download Full-text

High-precision small-scale laser focal spot measurements

Laser and Particle Beams ◽

10.1017/s0263034612001073 ◽

2013 ◽

Vol 31 (1) ◽

pp. 177-183 ◽

Cited By ~ 3

Author(s):

Z.W. Lu ◽

X.Y. Liu ◽

X. Wang ◽

D.X. Ba ◽

Z.H. Jiang ◽

...

Keyword(s):

Background Noise ◽

Measurement Accuracy ◽

Focal Spot ◽

Small Scale ◽

Two Dimensional ◽

Charge Coupled Device ◽

Spot Diameter ◽

Focal Spot Diameter ◽

Laser Focal Spot ◽

Better Than

AbstractIn this paper, a method of two-dimensional fine-scanning with charge coupled device has been conducted to precisely measure spatial position and intensity distribution of small-scale focal spot (diameter in microns). The measurement accuracy of the small-scale focal spot position is better than 1 µm when the fluctuations of the light energy and background noise are relatively small. The theoretical analysis is consistent with the experimental results.

Download Full-text