Thermal-Hydraulic Performance of Aluminum Foam Heat Exchangers with Varying Cellular Lattice Structures

2017 ◽  
Author(s):  
Edward Kraft ◽  
Kevin Laux ◽  
Albert To ◽  
Mark L. Kimber
Keyword(s):  
Heat Exchangers ◽  
Aluminum Foam ◽  
Hydraulic Performance ◽  
Lattice Structures

The Air-Side Thermal-Hydraulic Performance of Flat-Tube Heat Exchangers With Louvered, Wavy, and Plain Fins Under Dry and Wet Conditions

2009 ◽  
Vol 131 (6) ◽  
Author(s):  
Young-Gil Park ◽  
Anthony M. Jacobi
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Hydraulic Performance ◽  
Operating Conditions ◽  
Geometrical Parameters ◽  
Flat Tube ◽  
Parametric Effects ◽  
Dry And Wet Conditions ◽  
Wet Surface ◽  
Friction Performance

The air-side thermal-hydraulic performance of flat-tube aluminum heat exchangers is studied experimentally for conditions typical to air-conditioning applications, for heat exchangers constructed with serpentine louvered, wavy, and plain fins. Using a closed-loop calorimetric wind tunnel, heat transfer and pressure drop are measured at air face velocities from 0.5 m/s to 2.8 m/s for dry- and wet-surface conditions. Parametric effects related to geometry and operating conditions on heat transfer and friction performance of the heat exchangers are explored. Significant differences in the effect of geometrical parameters are found for dry and wet conditions. For the louver-fin geometry, using a combined database from the present and the previous studies, empirical curve-fits for the Colburn j- and f-factors are developed in terms of a wet-surface multiplier. The wet-surface multiplier correlations fit the present database with rms relative residuals of 21.1% and 24.4% for j and f multipliers, respectively. Alternatively, stand-alone Colburn j and f correlations give rms relative residuals of 22.7% and 29.1%, respectively.

Impact of an Anisotropic Fin Surface Design on the Thermal-Hydraulic Performance of a Plain-Fin-and-Tube Heat Exchanger

2011 ◽  
Author(s):  
Rong Yu ◽  
Andrew D. Sommers ◽  
Nicole C. Okamoto ◽  
Koushik Upadhyayula
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Pressure Drop ◽  
Heat Exchangers ◽  
Hydraulic Performance ◽  
Normal Operation ◽  
Surface Design ◽  
Tube Heat Exchanger ◽  
Silane Coating ◽  
Side Pressure

In this study, we have explored the effectiveness of heat exchangers constructed using anisotropic, micro-patterned aluminum fins to more completely drain the condensate that forms on the heat transfer surface during normal operation with the aim of improving the thermal-hydraulic performance of the heat exchanger. This study presents and critically evaluates the efficacy of full-scale heat exchangers constructed from these micro-grooved surfaces by measuring dry/wet air-side pressure drop and dry/wet air-side heat transfer data. The new fin surface design was shown to decrease the core pressure drop of the heat exchanger during wet operation from 9.3% to 52.7%. Furthermore, these prototype fin surfaces were shown to have a negligible effect on the heat transfer coefficient under both dry and wet conditions while at the same time reducing the wet airside pressure drop thereby decreasing fan power consumption. That is to say, this novel fin surface design has shown the ability, through improved condensate management, to enhance the thermal-hydraulic performance of plain-fin-and-tube heat exchangers used in air-conditioning applications. This paper also presents data pertaining to the durability of the alkyl silane coating.

Thermal-hydraulic performance and optimization of attack angle of delta winglets in plain and wavy finned-tube heat exchangers

2019 ◽  
Vol 150 ◽  
pp. 1054-1065 ◽  
Author(s):  
Hanbing Ke ◽  
Tariq Amin Khan ◽  
Wei Li ◽  
Yusheng Lin ◽  
Zhiwu Ke ◽  
...  
Keyword(s):  
Heat Exchangers ◽  
Hydraulic Performance ◽  
Finned Tube ◽  
Attack Angle
Sign in / Sign up

Export Citation Format

Share Document