scholarly journals OPTIMIZATION OF COLLIMATOR APERTURE GEOMETRY FOR BNCT KARTINI RESEARCH REACTOR USING MCNPX

2019 ◽  
Vol 21 (1) ◽  
pp. 9
Author(s):  
Ramadhan Valiant Gill S.B. ◽  
Yohannes Sardjono

Boron Neutron Capture Therapy (BNCT) is one of the promising cancer therapy modalities due to its selectivity which only kills the cancer cells and does not damage healthy cells around cancer. In principle, BNCT utilizes the high ionization properties of alpha (4He) and lithium (7Li) particles derived from the reaction between epithermal and boron-10 neutrons (10B + n → 7Li + 4He) in cells, where trace distance of alpha and lithium particles is equivalent with cell diameter. The neutron source used in BNCT can come from a reactor, as a condition for conducting BNCT therapy tests, there are five standard parameters that must be met for a neutron source to be used as a source, and the standards come from IAEA. This research is based on simulation using the MCNPX program which aims to optimize IAEA parameters that have been obtained in previous studies by changing the shape of the collimator geometry from cone shape to cylinder with variations diameter from 3, 5 and 10 cm and also the simulation divided into two schemes namely first moderator Al is placed in a position 9.5 cm behind the collimator and the second is the moderator Al is pressed into the base point of the aperture in the collimator. In this work, neutrons originated from Yogyakarta Kartini research reactor have the energy range in the continuous form. The results of the optimization on each scheme of the collimator are compared with the outputs that have been obtained in previous studies where the aperture of the collimator is in the cone shape. The most optimal output obtained from the results is a collimator with a diameter of 5 cm in the second scheme where the results of IAEA parameters that are produced (n/cm2 s) = 2.18E+8, / (Gy-cm2/n) = 6.69E-13, / (Gy-cm2/n) = 2.44E-13,  = 4.03E-01, and J/ = 6.31E-01. These results can still be used for BNCT experiments but need a long irradiation time and when compared to previous studies, the output of the collimator with the diameter of 5 cm is more optimal.Keywords: BNCT, Collimator, IAEA Parameters, MCNPX, Cylindrical shape 

2019 ◽  
Vol 4 (1) ◽  
pp. 27-32
Author(s):  
Ramadhan Valiant Gill S Balle

Boron neutron capture therapy (BNCT) is an effective radiotherapy modality to kill cancer. BNCT can selectively kill cancer cells without damaging the healthy tissue around it by using alpha particle and lithium ion from the reaction of 10B(n,α)7Li. These particles have a track of more or less 5 to 9 μm which is the same as the cell diameter. In order to support the development of BNCT in Indonesia an in vivo simulation is performed in a simple mouse geometry containing a 4T1 breast cancer characteristic treated with BNCT using PHITS program. The Neutron source that was used in this simulation was based on TRIGA Kartini Research Reactor. The boron compound concentration in the tumor was varied from 20 ppm up to 90 ppm, and then the total dose was calculated in the mice. Total dose that the tumor received was 0.0161, 0.0168, 0.0175, 0.0182, 0.0185, 0.0188, 0.019, and 0.0191 Gy-Eq/s, respectively and the irradiation time to reach 50 Gy was 51, 50, 48, 46, 45, 45, 44, 44, 40 minutes respectively. This shows that the higher the concentration of boron compound in the tumor the higher the dose that mice received and irradiation time was decreased with the increase of the boron compound concentration.


Author(s):  
Alexander A. Ivanov ◽  
Artem N. Smirnov ◽  
Sergei Yu. Taskaev ◽  
Boris F. Bayanov ◽  
Yurii I. Belchenko ◽  
...  

2008 ◽  
Vol 139 (2_suppl) ◽  
pp. P121-P121
Author(s):  
Norimasa Morita ◽  
Aihara Teruhito ◽  
Msako Uno ◽  
Koji Ono ◽  
Tamotsu Harada

Objectives Boron neutron capture therapy (BNCT) is one of the radiation therapies known to have a selective lethal effect on tumor cells. Thermal neutrons are captured by the 10B atom, resulting in the emission of linear recoiling Alfa particles and 7Li nuclei, with traveling ranges of ∼9 and ∼5 micrometers respectively. These particles are high linear energy transfer (LET) radiation and lethally damage DNA. BNCT for cutaneous melanoma, using 10B-para-boronophe-nylalanine (BPA) as the boron delivery agent, was developed and successful BNCT treatment of 18 melanoma patients has been reported by Mishima et al. Methods Based on their treatment regimen and with the approval of the Nuclear Safety Bureau of the Japanese government and the Medical Ethics Committees of Kawasaki Medical School and Kyoto University, we have conducted BNCT clinical trials on patients with mucosal melanomas in head-and-neck at the Kyoto University Research Reactor (KUR) and the Japan Research Reactor No. 4 (JRR-4) since 2005. Results To date, we have treated 6 patients with mucosal melanomas in the nasal cavity with BNCT. 4 patients showed a complete response (CR) by 6 months and 2 patients showed a partial response (PR) 3 months after BNCT. None of the patients showed any serious damage in normal tissue surrounding tumor site. One patient from this study died due to distant metastasis. However, no local recurrence of melanoma has been observed in all CR patients and no regrowth of melanoma in all PR patients. Conclusions BNCT thus is a promising treatment for achieving local control of mucosal melanomas.


2016 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Yohannes Sardjono ◽  
Susilo Widodo ◽  
Irhas Irhas ◽  
Hilmi Tantawy

Boron Neutron Capture Therapy (BNCT) is an advanced form of radiotherapy technique that is potentially superior to all conventional techniques for cancer treatment, as it is targeted at killing individual cancerous cells with minimal damage to surrounding healthy cells. After decades of development, BNCT has reached clinical-trial stages in several countries, mainly for treating challenging cancers such as malignant brain tumors. The Indonesian consortium of BNCT already developed of the design BNCT for many cases of type cancers using many neutron sources. The main objective of the Indonesian consortium BNCT are the development of BNCT technology package which consists of a non nuclear reactor neutron source based on cyclotron and compact neutron generator technique, advanced boron-carrying pharmaceutical, and user-friendly treatment platform with automatic operation and feedback system as well as commercialization of the BNCT though franchised network of BNCT clinics worldwide. The Indonesian consortium BNCT will offering to participate in Boron carrier pharmaceuticals development and testing, development of cyclotron and compact neutron generators and provision of neutrons from the 100 kW Kartini Research Reactor to guide and to validate compact neutron generator development. Studies were carried out to design a collimator which results in epithermal neutron beam for Boron Neutron Capture Therapy (BNCT) at the Kartini Research Reactor by means of Monte Carlo N-Particle 5 (MCNP5) codes. Reactor within 100 kW of output thermal power was used as the neutron source. The design criteria were based on the IAEA’s recommendation. All materials used were varied in size, according to the value of mean free path for each. Monte Carlo simulations indicated that by using 5 cm thick of Ni as collimator wall, 60 cm thick of Al as moderator, 15 cm thick of 60Ni as filter, 1,5 cm thick of Bi as "-ray shielding, 3 cm thick of 6Li2CO3-polyethylene as beam delimiter, with 3-5 cm varied aperture size, epithermal neutron beam with minimum flux of 7,8 x 108 n.cm-2.s-1, maximum fast neutron and "-ray components of, respectively, 1,9 x 10-13 Gy.cm2.n-1 and 1,8 x 10-13 Gy.cm2.n-1, maximum thermal neutron per epithermal neutron ratio of 0,009, and beam minimum directionality of 0,72, could be produced. The beam did not fully pass the IAEA’s criteria, since the epithermal neutron flux was still below the recommended value, 1,0 x 109 n.cm-2.s-1. Nonetheless, it was still usable with epithermal neutron flux exceeded 5 x 108 n.cm-2.s-1. When this collimator was surrounded by 8 cm thick of graphite, the characteristics of the beam became better that it passed all IAEA’s criteria with epithermal neutron flux up to 1,7 x 109 n.cm-2.s-1. it is still feasible for BNCT in vivo experiment and study of many cases cancer type i.e.; liver and lung curcinoma. In this case, thermal neutron produced by model of Collimated Thermal Column Kartini Research Nuclear Reactor, Yogyakarta. Sodium boroncaptate (BSH) was used as in this research. BSH had effected in liver for radiation quality factor as 0.8 in health tissue and 2.5 in cancer tissue. Modelling organ and source used liver organ who contain of cancer tissue and research reactor. Variation of boron concentration was 20, 25, 30, 35, 40, 45, and 47 $g/g cancer. Output of MCNP calculation were neutron scattering dose, gamma ray dose and neutron flux from reactor. Given the advantages of low density owned by lungs, hence BNCT is a solid option that can be utilized to eradicate the cell cancer in lungs. Modelling organ and neutron source for lung carcinoma was used Compact Neutron Generator (CNG) by deuterium-tritium which was used is boronophenylalanine (BPA). The concentration of boron-10 compound was varied in the study; i.e. the variations were 20; 25; 30; 35; 40 and 45 μg.g-1 cancer tissues. Ideally, the primary dose which is solemnly expected to contribute in the therapy is alpha dose, but the secondary dose; i.e. neutron scattering dose, proton dose and gamma dose that are caused due to the interaction of thermal neutron with the spectra of tissue can not be simply omitted. Thus, the desired output of MCNPX; i.e. tally, were thermal and epithermal neutron flux, neutron and photon dose. The liver study variation of boron concentration result dose rate to every variation were0,042; 0,050; 0,058; 0,067; 0,074; 0,082; 0,085 Gy/sec. Irradiation time who need to every concentration were 1194,687 sec (19 min 54 sec);999,645 sec (16 min 39 sec); 858,746 sec (14 min 19 sec); 743,810 sec (12 min 24 sec); 675,156 sec (11 min 15 sec); 608,480 sec (10 min 8 sec); 585,807sec (9 min 45 sec). The lung carcinoma study variations of boron-10 concentration in tissue resulted in the dose rate of each variables respectively were 0.003145, 0.003657, 0.00359, 0.00385, 0.00438 and 0.00476 Gy.sec-1 . The irradiated time needed for therapy for each variables respectively were 375.34, 357.55, 287.58, 284.95, 237.84 and 219.84 minutes.


2018 ◽  
Vol 33 (1) ◽  
pp. 31-46
Author(s):  
Stoyan Kadalev

The present paper considers the approach to an assessment of technological radiation sources in the primary water-water reactor circulation loop. In principle, such an evaluation is a multidisciplinary task that covers not only the irradiation of the nuclei, the formation of new isotopes and their decay when they are unstable, but also calculations in the field of hydraulics in order to perform an assessment of the irradiation time and the decay time. A general and a more detailed review of the radiation sources formation in the nuclear facilities and the pool type research reactors with demineralized water as a heat carrier are prepared. The initial isotopic composition of the heat carrier has been adopted according to the Vienna Standard Mean Ocean Water recommended by the International Atomic Energy Agency. The general mathematical model of the processes of nuclei irradiation, the formation of new isotopes and their decay, the assessment of the irradiation time and the decay time is described in details, enabling the repetition of this evaluation to a particular facility. The presented approach is applied in the reconstruction design of the nuclear research reactor IRT-2000, Sofia, Bulgaria.


2020 ◽  
Vol 35 (3) ◽  
pp. 177-181
Author(s):  
Afifah Hana Tsurayya ◽  
Azzam Zukhrofani Iman ◽  
R. Yosi Aprian Sari ◽  
Arief Fauzi ◽  
Gede Sutresna Wijaya

The research aims to measure the radiation dose rate over the radiation shielding which is made of paraffin and aluminium and to determine the best shield material for the safety of radiation workers. The examination used MCNP (Monte Carlo N-Particle) simulator to model the BNCT neutron source and the shield. The shield should reduce radiation to less than the dose limit of 10.42 µSv/h, which is assumed to be the most conservative limit when the duration of workers is 1920 h. The first design resulted in a radiation dose rate which was still greater than the limit. Therefore, optimization was done by adding the lead on the outer part of the shield. After optimization by adding the lead with certain layers, the radiation dose rate decreased, with the largest dose being 57.60 µSv/h. Some locations over the limit could be overcome by other radiation protection aspects such as distance and time. The paraffin blocks were covered by aluminium to keep the shield structure. The lead was used to absorb the gamma ray which resulted from the interaction between the neutrons and aluminium.


Sign in / Sign up

Export Citation Format

Share Document