Study of Physical, Mechanical, and Barrier Properties in Linear Low-Density Polyethylene Mixed with Silver Zeolite Nanoparticles (Ag-zeolite) Film

This article investigates three-layer co-extruded blown film comprised of low-density polyethylene (LDPE)/ethylene–vinyl alcohol (EVOH)/LDPE without adhesion layers. Various thicknesses of pure EVOH were sandwiched by outer LDPE layers blended with linear low-density polyethylene-grafted-maleic anhydride (LLDPE- g-MAH) as compatibilizer in concentrations from 0 wt% to 2.0 wt%. The study found that a mere 3-μ EVOH layer can achieve a 180 times improvement of oxygen barrier properties as compared to the control sample. When the EVOH loading is 10–15 wt% of the total film mass, the addition of LLDPE- g-MAH into the outer layers indicated a positive synergistic effect by enhancing barrier properties. In contrast, when the EVOH loadings are at 5 wt% and 7.5 wt%, the barrier properties of the film was reduced. Layer-to-layer interaction between the LDPE and EVOH was notably improved as demonstrated by a 26–42% increase of interlaminate peel strength in the presence of 0.5–2 wt% LLDPE- g-MAH in all samples. Congruently, the introduction of the LLDPE- g-MAH into the outer LDPE layers also resulted in an increased dart impact toughness and tensile strength for the film. The EVOH crystallinity showed a reduction after adding LLDPE- g-MAH, particularly apparent for the lower EVOH concentrations.

Download Full-text

Large-scale fabrication of linear low density polyethylene/layered double hydroxides composite films with enhanced heat retention, thermal, mechanical, optical and water vapor barrier properties

Journal of Solid State Chemistry ◽

10.1016/j.jssc.2016.08.010 ◽

2016 ◽

Vol 243 ◽

pp. 62-69 ◽

Cited By ~ 5

Author(s):

Jiazhuo Xie ◽

Kun Zhang ◽

Qinghua Zhao ◽

Qingguo Wang ◽

Jing Xu

Keyword(s):

Water Vapor ◽

Layered Double Hydroxides ◽

Large Scale ◽

Composite Films ◽

Barrier Properties ◽

Low Density Polyethylene ◽

Low Density ◽

Linear Low Density Polyethylene ◽

Water Vapor Barrier ◽

Double Hydroxides

Download Full-text

Low-Density Polyethylene Films Carrying ferula asafoetida Extract for Active Food Packaging: Thermal, Mechanical, Optical, Barrier, and Antifungal Properties

Advances in Polymer Technology ◽

10.1155/2020/4098472 ◽

2020 ◽

Vol 2020 ◽

pp. 1-15

Author(s):

Razieh Niazmand ◽

Bibi Marzieh Razavizadeh ◽

Farzaneh Sabbagh

Keyword(s):

Polymer Matrix ◽

Food Packaging ◽

Barrier Properties ◽

Low Density Polyethylene ◽

Low Density ◽

Optical Barrier ◽

Leaf Extracts ◽

Polyethylene Films ◽

Active Food Packaging ◽

Ferula Asafoetida

The physical, thermal, mechanical, optical, microstructural, and barrier properties of low-density polyethylene films (LDPE) containing ferula asafoetida leaf and gum extracts were investigated. Results showed a reduction in elasticity and tensile strength with increasing extract concentration in the polymer matrix. The melting temperature and enthalpy increased with increasing concentration of extracts. The films containing extracts had lower L∗ and a∗ and higher b∗ indices. The films containing leaf extract had more barrier potential to UV than the gum extracts. The oxygen permeability in films containing 5% of leaf and gum extracts increased by 2.3 and 2.1 times, respectively. The morphology of the active films was similar to bubble swollen islands, which was more pronounced at higher concentrations of gum and leaf extracts. FTIR results confirmed some chemical interactions of ferula extracts with the polymer matrix. At the end of day 14th, the growth rate of Aspergillus niger and Saccharomyces cerevisea in the presence of the PE-Gum-5 reduced more than PE-Leaf-5 (3.7 and 2.4 logarithmic cycles, respectively) compared to the first day. Our findings showed that active LDPE films have desire thermo-mechanical and barrier properties for food packaging.

Download Full-text

Identification of the LLDPE Constitutive Material Model for Energy Absorption in Impact Applications

Polymers ◽

10.3390/polym13101537 ◽

2021 ◽

Vol 13 (10) ◽

pp. 1537

Author(s):

Luděk Hynčík ◽

Petra Kochová ◽

Jan Špička ◽

Tomasz Bońkowski ◽

Robert Cimrman ◽

...

Keyword(s):

Strain Rate ◽

Material Model ◽

Low Density Polyethylene ◽

Low Density ◽

Linear Low Density Polyethylene ◽

Stress Strain ◽

Rate Dependent ◽

Constitutive Material Model ◽

Principal Directions ◽

Constitutive Material

Current industrial trends bring new challenges in energy absorbing systems. Polymer materials as the traditional packaging materials seem to be promising due to their low weight, structure, and production price. Based on the review, the linear low-density polyethylene (LLDPE) material was identified as the most promising material for absorbing impact energy. The current paper addresses the identification of the material parameters and the development of a constitutive material model to be used in future designs by virtual prototyping. The paper deals with the experimental measurement of the stress-strain relations of linear low-density polyethylene under static and dynamic loading. The quasi-static measurement was realized in two perpendicular principal directions and was supplemented by a test measurement in the 45° direction, i.e., exactly between the principal directions. The quasi-static stress-strain curves were analyzed as an initial step for dynamic strain rate-dependent material behavior. The dynamic response was tested in a drop tower using a spherical impactor hitting a flat material multi-layered specimen at two different energy levels. The strain rate-dependent material model was identified by optimizing the static material response obtained in the dynamic experiments. The material model was validated by the virtual reconstruction of the experiments and by comparing the numerical results to the experimental ones.

Download Full-text