scholarly journals Dynamic Bandwidth Allocation for Internet of Things System Using Elastic Wireless Local Area Network

2021 ◽  
Vol 17 (3) ◽  
Author(s):  
I Putu Sudharma Yoga ◽  
Gede Sukadarmika ◽  
Linawati .

Rapid technological development, triggering various applications development that are increasingly innovative. One of them is the Internet of Things (IoT) system that makes human works easier and more effective. Along with sensor technology development in monitoring and controlling through IoT systems, a mechanism is needed to manage bandwidth so that IoT system can function optimally, especially in buildings designated as public areas. Smart building supported by various integrated sensors to maintain safety and comfort in the area. This study proposes the application of Elastic WLAN as a model for dynamic bandwidth management in IoT systems. In this model, IoT bandwidth changes automatically according to the number of traffic measurements for each IoT connected to the network As an effort to determine the performance of the elastic WLAN mechanism, this study succeeded in developing a prototype IoT device that implements Elastic WLAN on an Access-Point Raspberry Pi by using two temperature sensors placed in separate locations. The system successfully allocates bandwidth to each IoT according to the amount of data input from each temperature sensor installed. The higher the amount of data captured by the sensor, the system will automatically allocate the higher bandwidth to the sensor system, and vice versa.

Author(s):  
Muel Fred L. Ruiz ◽  
Rica I. Esclada ◽  
Jannica H. Balderama ◽  
Anzel Anne I. Aguirre ◽  
Ma. Nancy I. Cutin ◽  
...  

This study presents the development of a wireless, interactive, educational (WISE) game that incorporates the use of smartphones for reviewing lessons that might suit the standards of the Philippine government’s education department. It is easier today to engage students using digital platforms for education using interactive digital games. In this study, the users can play the game by connecting the smartphones to the prototype through wireless local area network. It consists of two types of cards: power cards which contribute excitement to the game, and question cards which contain questions to be answered by the players. The prototype is an integration of the following components: Raspberry Pi 3B, RFID reader and cards, and speakers. A graphical user interface where the players interact with the game was created using scripting languages, such as PHP, and JavaScript. The project was evaluated by different grade school students of Metro Manila, Philippines. The results of users’ evaluation show that the prototype is accessible and effective for use based on functionality and that the project can also serve as a tool for lesson reviews. Future development of WISE game includes its integration and compatibility to different operating systems with larger databases and accessibility.


2018 ◽  
Vol 8 (2) ◽  
pp. 254-281 ◽  
Author(s):  
Md. Manowarul Islam ◽  
Nobuo Funabiki ◽  
Minoru Kuribayashi ◽  
Sumon Kumar Debnath ◽  
Kwenga Ismael Munene ◽  
...  

2020 ◽  
Vol 7 (6) ◽  
pp. 1205
Author(s):  
Abdul Jalil

<p>Salah satu tantangan di era revolusi industri 4.0 adalah pengembangan sistem kontrol secara jarak jauh menggunakan koneksi jaringan nirkabel. Tujuan penelitian ini adalah membangun sistem kontrol perangkat elektronik jarak jauh dengan memanfaatkan jaringan <em>wireless tethering </em>pada <em>smartphone</em> menggunakan topologi <em>Wireless Local Area Network</em> (WLAN) dan <em>Robot Operating System</em> (ROS) sebagai perangkat lunak kontrol. Pemanfaatan <em>wireless tethering smartphone</em> untuk berbagi koneksi internet dapat dimanfaatkan untuk mengontrol perangkat elektronik yang terkoneksi ke Raspberry Pi. Koneksi jaringan <em>wireless tethering</em> memiliki arsitektur jaringan yang cukup sederhana jika dibandingkan dengan arsitektur pengontrolan jarak jauh lainnya, serta memiliki jarak jangkau koneksi yang cukup jauh dibandingkan dengan koneksi Bluetooth. Metodologi yang digunakan untuk mengontrol perangkat elektronik pada penelitian ini adalah menggunakan <em>Remote Access Control</em> (RAC) berbasis protokol SSH. Pemanfaatan <em>wireless tethering</em> dan aplikasi <em>mobile</em> SSH dapat digunakan untuk mengirim perintah ROS <em>message</em> dari <em>smartphone</em> ke Raspberry Pi untuk mengontrol pin GPIO Raspberry Pi agar aktif <em>high</em> atau aktif <em>low</em>. Pada saat ROS <em>message</em> mengirim perintah ke GPIO untuk aktif <em>high</em>, maka sistem akan memberikan instruksi kepada relay untuk menyalakan perangkat elektronik. Selanjutnya pada saat GPIO menerima perintah untuk aktif <em>low</em>, maka sistem akan memberikan instruksi kepada relay untuk mematikan perangkat elektronik. Hasil penelitian ini adalah <em>smartphone </em>android dapat digunakan untuk mengontrol perangkat elektronik seperti lampu, kipas angin, pemanas ruangan, dan <em>air conditioner</em> secara jarak jauh menggunakan jaringan WLAN berdasarkan perintah dari ROS <em>message</em>. Perangkat elektronik pada penelitian ini dapat di kontrol secara efektif pada jarak 20 meter di dalam ruangan dan 40 meter di area bebas hambatan.</p><p> </p><p class="Judul2"><strong><em>Abstract</em></strong></p><p class="Abstract"><em>One of the challenges in the Industrial Revolution 4.0 is the development of control systems by remotely using a wireless network connection. This study aims to build a control system for controlling the electronic devices by remotely with the utilization of wireless tethering network in the smartphone used Wireless Local Area Network (WLAN) topology and Robot Operating System (ROS) as software for the controller. Utilization of wireless tethering in the smartphone for share the internet connection can be used for control the electronic devices that connected to the Raspberry Pi. The connection of wireless tethering has a simple architecture when compared with the other architecture of the control system by remotely, it then has a long-range connection when compared to the Bluetooth connection. The methodology has used to manage the electronic devices in this study is used Remote Access Control (RAC) based on SSH protocol. The utilization of wireless tethering and mobile SSH can be used to sends ROS message command from smartphone to the Raspberry Pi to control the Raspberry Pi GPIO pin to active high or active low. When android smartphone send ROS message command to the Raspberry Pi to make the GPIO to active high, the system will instruct the relay to turn on the electronic devices. Then when GPIO accepts the instruction to active low, the system will instruct the relay to turn off the electronic devices. The result of this study is that android smartphone can be used to control the electronic devices such as a lamp, fan, heater, and air conditioner by remotely used WLAN network and command from ROS message. The electronic devices on this study can be controlled by effectively with the distance of 20 meters in the rooms and 40 meters at the outside area. </em></p><p class="Judul2"><strong><em><br /></em></strong></p>


Author(s):  
Rahardhita Widyatra Sudibyo ◽  
Nobuo Funabiki ◽  
Minoru Kuribayashi ◽  
Kwenga Ismael Munene ◽  
Hendy Briantoro ◽  
...  

The IEEE802.11n wireless local-area network (WLAN) has been widely adopted due to the flexible coverage and lower installation cost. However, the TCP throughput unfairness was detected when multiple hosts concurrently communicate with a single access-point (AP). Previously, the authors proposed the TCP fairness control method for only two hosts in the elastic WLAN system using Raspberry Pi AP, which dynamically adapts the topology according to the traffic demand. The delay is introduced in the packet transmission to the faster host from the AP, which is optimized by the PI feedback control such that the measured throughput becomes equal between the hosts. In this paper, the authors proposed a generalization of this method for any number of hosts by newly introducing the target throughput as the equal goal among the hosts. It is dynamically updated using the measured throughputs. The effectiveness of the proposal is verified through experiments using the elastic WLAN system testbed with one AP and up to four hosts.


Author(s):  
Rashmi SK ◽  
Swathi RN ◽  
Vaishnavi AS ◽  
Nekkanti Deepak

The Internet was initially used to transfer data packets between users and data sources with a specific IP address. Due to advancements, the Internet is being used to share data among different small, resource constrained devices connected in billions to constitute the (IOT) Internet of things .In addition, the paper discusses about wireless LAN Wi-Fi technology i.e. wireless local area network protocol and on a larger scale, mobile communication technology, that is used to provide connectivity to the internet, the wide area network. The paper draws an attention towards the background of IOT and its distinction with other technologies, discussion on network optimization in IOT. This paper not only reviews, compares and consolidates the recent related works, but also admires the author’s findings, solutions and discusses its usefulness towards network optimization in IOT. The uniqueness of this paper lies in the review of network optimization issues and challenges in IOT. In this paper, a comprehensive survey on the network optimization in IOT is presented.


Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 4954
Author(s):  
Toni Adame ◽  
Marc Carrascosa-Zamacois ◽  
Boris Bellalta

A short time after the official launch of WiFi 6, IEEE 802.11 working groups along with the WiFi Alliance are already designing its successor in the wireless local area network (WLAN) ecosystem: WiFi 7. With the IEEE 802.11be amendment as one of its main constituent parts, future WiFi 7 aims to include time-sensitive networking (TSN) capabilities to support low latency and ultra-reliability in license-exempt spectrum bands, enabling many new Internet of Things scenarios. This article first introduces the key features of IEEE 802.11be, which are then used as the basis to discuss how TSN functionalities could be implemented in WiFi 7. Finally, the benefits and requirements of the most representative Internet of Things low-latency use cases for WiFi 7 are reviewed: multimedia, healthcare, industrial, and transport.


Author(s):  
Hendy Briantoro ◽  
Nobuo Funabiki ◽  
Minoru Kuribayashi ◽  
Kwenga Ismael Munene ◽  
Rahardhita Widyatra Sudibyo ◽  
...  

Currently, the IEEE 802.11 wireless local-area network (WLAN) has been prevalent around the world due to the advantages of mobility, flexibility, and scalability. WLAN offers the wireless internet-access method through an access-point (AP) at homes, schools, or offices. When multiple APs are deployed in the network field, the proper transmission power of each AP is essential to improve the performance, considering the coverage area, transmission capacity, and interference. In this paper, the authors study the transmission power optimization of concurrently communicating two APs in WLAN. Based on extensive experiment results, the authors propose a method of selecting the best power for each AP from the signal-to-noise ratio (SNR) of receiving signal strength (RSS). For evaluations, the authors implemented the proposed method on the elastic WLAN system testbed using Raspberry Pi for APs and conducted experiments for nine network topologies in two buildings at Okayama University. The results show that the proposal always selects the best power in any topology.


Sign in / Sign up

Export Citation Format

Share Document