Recently, wet blasting is generally used such as liquid honing and water jet machining in surface before plating of stainless steel. The outstanding feature of wet blasting is to prevent generation of static electric charge, to use micro abrasive grain, and to have cushioning for workpiece. On the other hand, the disadvantage of wet blasting is to generate corrosion of equipment and liquid waste under processing. Moreover, the using abrasive grain is available on a limited basis. In particular, improvement disposal of liquid waste under processing is crucial in the near future. This paper makes proposal for improvement of surface texture by utilizing dry blasting, and it conducts improvement of surface texture about martensite stainless steel (SUS420J2 In JIS), which is used in material for scale. In the previous report, it has been cleared that relationship between surface texture and wettability. In this report, adhesion of plating was measured by scratch test. As a result, it was cleared that availability of adhesion evaluation by utilizing wettability.
Strengthening Effect after Disintegration of Stainless Steel Using Pulsating Water Jet