The purpose of the present study was to investigate the suitability of different soilless substrates for container production of highbush blueberry (Vaccinium sp.). Young plants of ‘Snowchaser’ blueberry were grown in 4.4-L pots filled with media containing 10% perlite and varying proportions of sphagnum moss, coconut (Cocos nucifera L.) coir, and douglas fir [Pseudotsuga menziesii Mirb. (Franco)] bark, as well as a commercially available mix of peatmoss, perlite, and other ingredients for comparison. Total plant dry weight (DW) was similar among the treatments at 72 days after transplanting, but at 128 days, total DW was nearly twice as much in the commercial mix and in media with ≥60% peat or coir than in media with ≥60% bark. Inadequate irrigation likely played a role in poor plant growth in bark. Bark had lower porosity and water holding capacity than peat, coir, or the commercial mix and, therefore, dried quickly between irrigations. Bark also reduced plant uptake efficiency of a number of nutrients, including N, P, K, S, Ca, Mg, Mn, B, Cu, and Zn. Uptake efficiency of P, K, and Mg also differed between plants grown in peat and coir, which in most cases was a function of the initial concentration of nutrients in the media. Before planting, peat had the highest concentration of Mg and Fe among the media, whereas coir had the highest concentration of P and K. Leachate pH was initially lowest with peat and highest with coir but was similar among each of the media treatments by the end of the study. Electrical conductivity (EC) of leachate never exceeded 0.84 dS·m−1 in any treatment. Overall, peat and coir appear to be good substrates for container production of highbush blueberry. Bark, on the other hand, was less suitable, particularly when it exceeded 30% of the total media composition.
Determining Trace Gas Efflux from Container Production of Woody Nursery Crops
