scholarly journals Synthesis and Characterization of Biologically Potent Chalcone Bearing 1,3,4-Oxadiazole Linkage

Author(s):  
Hiren H. Variya ◽  
Vikram Panchal ◽  
Falguni G. Bhabhor ◽  
G.R. Patel

In this article, we have described to design and synthesized a series of substituted chalcone based 1,3,4-oxadiazole derivatives. Titled compounds (E)-S-(-5-phenyl-1,3,4-oxadiazol-2-yl) 2-(4-(3-(5-methyl-3oxo-2(p-tolyl)-2,3-dihydro-1H-pyrazol-4-yl)-3-oxoprop-1-en-1-yl) phenoxy) etanethioate (III1-6) were synthesized using of derivatives of S-(-5-phenyl-1,3,4 oxadiazole-2-yl)2-chloroethaethioate (I1-6) were reacted with (E)-4-(3-(4-hydroxyphenyl) acryloyl)-5-methyl-2(p-tolyl)-1H-pyrazol-3(2H)-one (II) in presence of K2CO3 in DMF as a solvent. The synthesized compounds were evaluated for their antimicrobial activity. The newly synthesized compounds were characterized by analytical and spectral (IR, 1H NMR, and LC-MS) Methods.

2011 ◽  
Vol 161 (9-10) ◽  
pp. 869-880 ◽  
Author(s):  
M. Ananth Reddy ◽  
G. Mallesham ◽  
Anup Thomas ◽  
Kola Srinivas ◽  
V. Jayathirtha Rao ◽  
...  

1986 ◽  
Vol 64 (4) ◽  
pp. 751-759 ◽  
Author(s):  
Daniel Cozak ◽  
Abdelhakim Mardhy ◽  
André Morneau

The reaction of CpTi(CO)2 (1), Cp2TiCl (2), and Cp2TiCl2 (3) (Cp = η5-C5H5) with purine (PuH) and adenine (AdH) in organic solvents is described. The compound 1 reacts with both molecules in an oxidative fashion giving Cp2Ti(C5H3N4)(C5H4N4) (4) and (Cp2Ti)2(C5H3N5) (5) with concomitant liberation of molecular carbon monoxide and hydrogen (4:1) following a first order rate law in metal complex. The compound 2 forms an adduct compound Cp2TiCl(C5H4N4) (6) with PuH. Monosubstituted derivatives Cp2TiCl(C5H3N4) (7) and Cp2TiCl(C5H4N5) (8) are formed from the reaction of the deprotonated bases with 3. In addition to the usual elemental analysis, the characteristic ir, 1H nmr, epr, and ms results are given for the new compounds.


2001 ◽  
Vol 05 (04) ◽  
pp. 367-375 ◽  
Author(s):  
S. ZEKİ YILDIZ ◽  
HALTİ KANTEKİN ◽  
YAŞAR GÖK

New metal-free 5 and metallophthalocyanines 6-11( M = Cu , Ni , Co , Pb , Zn ) fused in peripheral positions with four 24-membered tetraoxatetraaza macrocycles were prepared by cyclotetramerization of 24,25-dicyano-4,10,13,17-tetra(toluene-p-sulfonyl)-1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22-didicontinehydrobenzo[y][3,9,12,18]tetraaza[1,7,16,22]tetraoxatetradicontine in the presence of the corresponding metal salt or a strong organic base. While the N-tosylated derivatives of the phthalocyanines are soluble in common organic solvents, the detosylated derivative of copper phthalocyaninate is soluble in water. The aggregation properties of the phthalocyanines were also investigated as a function of concentration, solvent and oxidative medium. The new compounds are characterized by a combination of elemental analysis and 1 H NMR, 13 C NMR, IR, UV-vis and MS spectral data.


Author(s):  
Nisheeth C. Desai ◽  
Tushar J. Karkar

The synthesis of a novel series of 6-((arylidene) amino)-2-oxo-1-((1-(2-oxo-2H-chromen-3-yl) ethylidene) amino)-4-phenyl-1,2-dihydropyridine-3,5-dicarbonitriles 4a-o were synthesized and structures of compounds have been elucidated by IR,1H NMR,13C NMR and mass spectral data. Antimicrobial activity was measured against certain strains of bacteria and fungi by serial broth dilution. Evaluation of antimicrobial activity shown that the compounds (4g, 4j, 4k and 4o) were found to be most active against selected bacterial strains and compounds (4d, 4m and 4n) were found to be most active against selected fungal strains.


Author(s):  
Thanki Pragna ◽  
Hingrajia Dhaval ◽  
Modha Jayesh

The target compound N'-(5-Cyano-4-(4-fluorophenyl)-1,6-dihydro-1-methyl-6-oxopyrimidin-2-yl)-4-methylbenzohydrazide have been synthesized by the condensation of 4-(4-Fluorophenyl)-2-hydrazinyl-1,6-dihydro-1-methyl-6-oxopyrimidine-5-carbonitrile with different aroylchlorides. The obtained products were characterized by 1H NMR, Mass and IR Spectra.


2019 ◽  
Vol 17 (3) ◽  
pp. 541-554
Author(s):  
Neeranuth Intakaew ◽  
Puracheth Rithchumpon ◽  
Chanatkran Prommin ◽  
Saranphong Yimklan ◽  
Nawee Kungwan ◽  
...  

New chiral derivatizing agents and the effect of aromatic rings were investigated for absolute configuration of chiral alcohols via1H-NMR.


e-Polymers ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 491-499
Author(s):  
Fukai Yang ◽  
Hao Yu ◽  
Yuyuan Deng ◽  
Xinyu Xu

Abstract In this article, five kinds of soybean oil-based polyols (polyol-E, polyol-P, polyol-I, polyol-B, and polyol-M) were prepared by ring-opening the epoxy groups in epoxidized soybean oil (ESO) with ethyl alcohol, 1-pentanol, isoamyl alcohol, p-tert-butylphenol, and 4-methoxyphenol in the presence of tetrafluoroboric acid as the catalyst. The SOPs were characterized by FTIR, 1H NMR, GPC, viscosity, and hydroxyl numbers. Compared with ESO, the retention time of SOPs is shortened, indicating that the molecular weight of SOPs is increased. The structure of different monomers can significantly affect the hydroxyl numbers of SOPs. Due to the large steric hindrance of isoamyl alcohol, p-hydroxyanisole, and p-tert-butylphenol, SOPs prepared by these three monomers often undergo further dehydration to ether reactions, which consumes the hydroxyl of polyols, thus forming dimers and multimers; therefore, the hydroxyl numbers are much lower than polyol-E and polyol-P. The viscosity of polyol-E and polyol-P is much lower than that of polyol-I, polyol-B, and polyol-M. A longer distance between the molecules and the smaller intermolecular force makes the SOPs dehydrate to ether again. This generates dimer or polymers and makes the viscosity of these SOPs larger, and the molecular weight greatly increases.


2009 ◽  
Vol 509 (1) ◽  
pp. 274/[1016]-282/[1024]
Author(s):  
J. Mahadeva ◽  
K. B. Umesha ◽  
K. M. L. Rai ◽  
Nagappa

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Evelyn Carolina Martínez Ceballos ◽  
Ricardo Vera Graziano ◽  
Gonzalo Martínez Barrera ◽  
Oscar Olea Mejía

Poly(dichlorophosphazene) was prepared by melt ring-opening polymerization of the hexachlorocyclotriphosphazene. Poly[bis(2-hydroxyethyl-methacrylate)-phosphazene] and poly[(2-hydroxyethyl-methacrylate)-graft-poly(lactic-acid)-phosphazene] were obtained by nucleophilic condensation reactions at different concentrations of the substituents. The properties of the synthesized copolymers were assessed by FTIR,1H-NMR and31P-NMR, thermal analysis (DSC-TGA), and electron microscopy (SEM). The copolymers have a block structure and show twoTg's below room temperature. They are stable up to a temperature of 100°C. The type of the substituents attached to the PZ backbone determines the morphology of the polymers.


Sign in / Sign up

Export Citation Format

Share Document