scholarly journals Bio-assembling and Bioprinting for Engineering Microvessels from the Bottom Up

2021 ◽  
Vol 7 (3) ◽  
pp. 366
Author(s):  
Xiaoming Liu ◽  
Tao Yue ◽  
Masaru Kojima ◽  
Qiang Huang ◽  
Tatsuo Arai
Keyword(s):  
Tissue Engineering ◽  
Three Dimensional ◽  
Building Blocks ◽  
Two Dimensional ◽  
Microvascular Network ◽  
Bottom Up ◽  
One Dimensional ◽  
Micro Scale ◽  
Formidable Challenge ◽  
Manufacturing Techniques

Blood vessels are essential in transporting nutrients, oxygen, metabolic wastes, and maintaining the homeostasis of the whole human body. Mass of engineered microvessels is required to deliver nutrients to the cells included in the constructed large three-dimensional (3D) functional tissues by diffusion. It is a formidable challenge to regenerate microvessels and build a microvascular network, mimicking the cellular viabilities and activities in the engineered organs with traditional or existing manufacturing techniques. Modular tissue engineering adopting the “bottom-up” approach builds one-dimensional (1D) or two-dimensional (2D) modular tissues in micro scale first and then uses these modules as building blocks to generate large tissues and organs with complex but indispensable microstructural features. Building the microvascular network utilizing this approach could be appropriate and adequate. In this review, we introduced existing methods using the “bottom-up” concept developed to fabricate microvessels including bio-assembling powered by different micromanipulation techniques andbioprinting utilizing varied solidification mechanisms. We compared and discussed the features of the artificial microvessels engineered by these two strategies from multiple aspects. Regarding the future development of engineering the microvessels from the bottom up, potential directions were also concluded.

scholarly journals Quick self-assembly of bio-inspired multi-dimensional well-ordered structures induced by ultrasonic wave energy

PLoS ONE ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. e0246453
Author(s):  
Connor Murphy ◽  
Yunqi Cao ◽  
Nelson Sepúlveda ◽  
Wei Li
Keyword(s):  
Ultrasonic Wave ◽  
Wave Energy ◽  
Self Assembly ◽  
Mechanical Vibration ◽  
Water Environment ◽  
Three Dimensional ◽  
Building Blocks ◽  
Two Dimensional ◽  
Ordered Structures ◽  
Bottom Up

Bottom-up self-assembly of components, inspired by hierarchically self-regulating aggregation of small subunits observed in nature, provides a strategy for constructing two- or three-dimensional intriguing biomimetic materials via the spontaneous combination of discrete building blocks. Herein, we report the methods of ultrasonic wave energy-assisted, fast, two- and three-dimensional mesoscale well-ordered self-assembly of microfabricated building blocks (100 μm in size). Mechanical vibration energy-driven self-assembly of microplatelets at the water-air interface of inverted water droplets is demonstrated, and the real-time formation process of the patterned structure is dynamically explored. 40 kHz ultrasonic wave is transferred into microplatelets suspended in a water environment to drive the self-assembly of predesigned well-ordered structures. Two-dimensional self-assembly of microplatelets inside the water phase with a large patterned area is achieved. Stable three-dimensional multi-layered self-assembled structures are quickly formed at the air-water interface. These demonstrations aim to open distinctive and effective ways for new two-dimensional surface coating technology with autonomous organization strategy, and three-dimensional complex hierarchical architectures built by the bottom-up method and commonly found in nature (such as nacre, bone or enamel, etc.).

Transformations of two-dimensional layered zinc phosphates to three-dimensional and one-dimensional structures

2002 ◽  
Vol 12 (4) ◽  
pp. 1044-1052 ◽  
Author(s):  
Amitava Choudhury ◽  
S. Neeraj ◽  
Srinivasan Natarajan ◽  
C. N. R. Rao
Keyword(s):  
Three Dimensional ◽  
Two Dimensional ◽  
One Dimensional ◽  
Zinc Phosphates

Mine Impact Burial Prediction From One to Three Dimensions

2008 ◽  
Vol 62 (1) ◽  
Author(s):  
Peter C. Chu
Keyword(s):  
Three Dimensional ◽  
Time History ◽  
Three Dimensions ◽  
Vertical Position ◽  
Burial Depth ◽  
Prediction Errors ◽  
Two Dimensional ◽  
Dimensional Model ◽  
One Dimensional ◽  
Dimensional Models

The Navy’s mine impact burial prediction model creates a time history of a cylindrical or a noncylindrical mine as it falls through air, water, and sediment. The output of the model is the predicted mine trajectory in air and water columns, burial depth/orientation in sediment, as well as height, area, and volume protruding. Model inputs consist of parameters of environment, mine characteristics, and initial release. This paper reviews near three decades’ effort on model development from one to three dimensions: (1) one-dimensional models predict the vertical position of the mine’s center of mass (COM) with the assumption of constant falling angle, (2) two-dimensional models predict the COM position in the (x,z) plane and the rotation around the y-axis, and (3) three-dimensional models predict the COM position in the (x,y,z) space and the rotation around the x-, y-, and z-axes. These models are verified using the data collected from mine impact burial experiments. The one-dimensional model only solves one momentum equation (in the z-direction). It cannot predict the mine trajectory and burial depth well. The two-dimensional model restricts the mine motion in the (x,z) plane (which requires motionless for the environmental fluids) and uses incorrect drag coefficients and inaccurate sediment dynamics. The prediction errors are large in the mine trajectory and burial depth prediction (six to ten times larger than the observed depth in sand bottom of the Monterey Bay). The three-dimensional model predicts the trajectory and burial depth relatively well for cylindrical, near-cylindrical mines, and operational mines such as Manta and Rockan mines.

Theory of ultrasonic attenuation in one and two dimensional metals

1976 ◽  
Vol 54 (14) ◽  
pp. 1454-1460 ◽  
Author(s):  
T. Tiedje ◽  
R. R. Haering
Keyword(s):  
Ultrasonic Attenuation ◽  
Three Dimensional ◽  
Electronic Systems ◽  
Two Dimensional ◽  
Temperature Dependent ◽  
One Dimensional ◽  
The Difference

The theory of ultrasonic attenuation in metals is extended so that it applies to quasi one and two dimensional electronic systems. It is shown that the attenuation in such systems differs significantly from the well-known results for three dimensional systems. The difference is particularly marked for one dimensional systems, for which the attenuation is shown to be strongly temperature dependent.

Efficient Synthetic Strategy to Construct Three-Dimensional 4f−5d Networks Using Neutral Two-Dimensional Layers As Building Blocks

2010 ◽  
Vol 49 (13) ◽  
pp. 5971-5976 ◽  
Author(s):  
Hu Zhou ◽  
Ai-Hua Yuan ◽  
Su-Yan Qian ◽  
You Song ◽  
Guo-Wang Diao
Keyword(s):  
Three Dimensional ◽  
Building Blocks ◽  
Two Dimensional ◽  
Synthetic Strategy

scholarly journals Advances in 3D Printing for Tissue Engineering

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3149
Author(s):  
Angelika Zaszczyńska ◽  
Maryla Moczulska-Heljak ◽  
Arkadiusz Gradys ◽  
Paweł Sajkiewicz
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Complex Structure ◽  
Three Dimensional ◽  
Computer Assisted ◽  
Scaffold Fabrication ◽  
Manufacturing Techniques ◽  
Printing Techniques ◽  
State Of Art

Tissue engineering (TE) scaffolds have enormous significance for the possibility of regeneration of complex tissue structures or even whole organs. Three-dimensional (3D) printing techniques allow fabricating TE scaffolds, having an extremely complex structure, in a repeatable and precise manner. Moreover, they enable the easy application of computer-assisted methods to TE scaffold design. The latest additive manufacturing techniques open up opportunities not otherwise available. This study aimed to summarize the state-of-art field of 3D printing techniques in applications for tissue engineering with a focus on the latest advancements. The following topics are discussed: systematics of the available 3D printing techniques applied for TE scaffold fabrication; overview of 3D printable biomaterials and advancements in 3D-printing-assisted tissue engineering.

scholarly journals Quasi-two-dimensional approximation for numerical simulation of flows in engine ducts

2019 ◽  
Author(s):  
V. Vlasenko ◽  
A. Shiryaeva
Keyword(s):  
High Speed ◽  
Fuel Injection ◽  
Three Dimensional ◽  
Preliminary Design ◽  
Two Dimensional ◽  
Combustion Chambers ◽  
New Approach ◽  
One Dimensional ◽  
Dimensional Approximation ◽  
3D Flows

New quasi-two-dimensional (2.5D) approach to description of three-dimensional (3D) flows in ducts is proposed. It generalizes quasi-one-dimensional (quasi-1D, 1.5D) theories. Calculations are performed in the (x; y) plane, but variable width of duct in the z direction is taken into account. Derivation of 2.5D approximation equations is given. Tests for verification of 2.5D calculations are proposed. Parametrical 2.5D calculations of flow with hydrogen combustion in an elliptical combustor of a high-speed aircraft, investigated within HEXAFLY-INT international project, are described. Optimal scheme of fuel injection is found and explained. For one regime, 2.5D and 3D calculations are compared. The new approach is recommended for use during preliminary design of combustion chambers.

Sign in / Sign up

Export Citation Format

Share Document