Novel Fin for Effective Heat Transfer in Shell-And-Tube Latent Heat Storage System

2016 ◽  
Author(s):  
P. Muthukumar ◽  
Hakeem Niyas
Keyword(s):  
Heat Transfer ◽  
Latent Heat ◽  
Heat Storage ◽  
Storage System ◽  
Latent Heat Storage ◽  
Effective Heat ◽  
Shell And Tube

scholarly journals Effective Separation of a Water in Oil Emulsion from a Direct Contact Latent Heat Storage System

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2264 ◽  
Author(s):  
Sebastian Ammann ◽  
Andreas Ammann ◽  
Rebecca Ravotti ◽  
Ludger Fischer ◽  
Anastasia Stamatiou ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Latent Heat ◽  
Direct Contact ◽  
Heat Storage ◽  
Storage System ◽  
Heat Transfer Fluid ◽  
Storage Unit ◽  
Latent Heat Storage ◽  
Oil Emulsion ◽  
Water In Oil Emulsion

The problem of emulsification between Phase Change Material (PCM) and Heat Transfer Fluid (HTF) in direct contact latent heat storage systems has been reported in various studies. This issue causes the PCM to flow out of the storage tank and crystallize at unwanted locations and thus presents a major limitation for the proper operation of such systems. These anomalies become more pronounced when high HTF flow rates are employed with the aim to achieve fast heat transfer rates. The goal of this paper is to find a method which will enable the fast separation of the formed emulsion and thus the uninterrupted operation of the storage unit. In this study, three separation methods were examined and the use of superhydrophobic filters was chosen as the best candidate for the demulsification of the PCM and HTF mixtures. The filter was produced by processing of a melamine sponge with different superhydrophobic adhesives and was tested with emulsions closely resembling the ones formed in a real direct contact setup. The superhydrophobic filter obtained, was able to separate the emulsions effectively while presenting a very high permeability (up to 1,194,980 kg h−1 m−2 bar−1). This is the first time the use of a superhydrophobic sponge has been investigated in the context of demulsification in direct contact latent heat storage.

Second-Law Efficiency of an Energy Storage-Removal Cycle in a Phase-Change Material Shell-and-Tube Heat Exchanger

1993 ◽  
Vol 115 (4) ◽  
pp. 240-243 ◽  
Author(s):  
Ch. Charach
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Phase Change ◽  
Phase Change Material ◽  
Latent Heat ◽  
Heat Storage ◽  
Latent Heat Storage ◽  
Tube Heat Exchanger ◽  
Shell And Tube ◽  
Change Material

This communication extends the thermodynamic analysis of latent heat storage in a shell-and-tube heat exchanger, developed recently, to the complete heat storage-removal cycle. Conditions for the cyclic operation of this system are formulated within the quasi-steady approximation for the axisymmetric two-dimensional conduction-controlled phase change. Explicit expressions for the overall number of entropy generation units that account for heat transfer and pressure drop irreversibilities are derived. Optimization of this figure of merit with respect to the freezing point of the phase-change material and with respect to the number of heat transfer units is analyzed. When the frictional irreversibilities of the heat removal stage are negligible, the results of these studies are in agreement with those developed recently by De Lucia and Bejan (1991) for a one-dimensional latent heat storage system.

scholarly journals Influence of the modeling parameters on the numerical CFD simulation of a shell-and-tube latent heat storage system with circular fins

2019 ◽  
Author(s):  
Clément Beust ◽  
Erwin Franquet ◽  
Jean-Pierre Bédécarrats ◽  
Pierre Garcia ◽  
Jérôme Pouvreau
Keyword(s):  
Latent Heat ◽  
Heat Storage ◽  
Cfd Simulation ◽  
Storage System ◽  
Latent Heat Storage ◽  
Shell And Tube
Sign in / Sign up

Export Citation Format

Share Document