Transformation of paraffin and olefin hydrocarbons on the modified on the zeolite-containing cracking catalyst

As a catalyst for studying the conversion of hydrocarbons contained in catalytic cracking gases, a modified Ni, Co, Cr industrial OMNIKAT-210P zeolite-containing catalyst was used. The purpose of the research is to obtain a high-octane component of gasoline. The deposition of metals was carried out on nano-sized particles of a zeolite-containing catalyst. Particle size was at the level of (5÷10)·10–9 m. The particle size allows you to evenly apply the metals Ni, Cr, Co on the surface of the nanoparticles. Then the particles are molded in the form of balls with a size of 2–3 mm and subjected to drying (120 °С) and calcining 450–500 °С. The yield of liquid products is at the level of 48.3–30.3 % of the mass.

Download Full-text

Upgrading Crude Biodiesel dari Minyak Goreng Bekas menggunakan Katalis H-Zeolit

Jurnal Kimia VALENSI ◽

10.15408/jkv.v5i1.10493 ◽

2019 ◽

Vol 5 (1) ◽

Author(s):

Isalmi Aziz ◽

Muhammad Akbar Tafdila ◽

Siti Nurbayti ◽

Lisa Adhani ◽

Wahyu Permata

Keyword(s):

Particle Size ◽

Reaction Temperature ◽

Octane Number ◽

Catalytic Cracking ◽

Catalyst Concentration ◽

Catalyst Particle ◽

Gasoline Fraction ◽

Optimum Conditions ◽

Used Cooking Oil ◽

Catalyst Particle Size

Crude biodiesel hasil transesterifikasi minyak goreng bekas dapat ditingkatkan kualitasnya melalui proses catalytic cracking menggunakan zeolit alam. Penelitian ini bertujuan untuk menentukan kondisi optimum proses catalytic cracking dan sifat fisika dan kimia biofuel yang dihasilkan. Reaksi dijalankan dalam reaktor dengan memvariasikan waktu (1, 2 dan 3 jam), konsentrasi katalis (3, 5 dan 7 %), ukuran partikel katalis (180, 250 dan 630μm) dan suhu reaksi (325, 350 dan 375°C). Kondisi optimum proses catalytic cracking crude biodiesel didapatkan pada : waktu 3 jam, konsentrasi katalis 7%, ukuran partikel katalis 180 μm dan suhu reaksi 375°C. Biofuel yang dihasilkan mengandung 6,26% fraksi bensin(C5-C11); 17,6% kerosin (C12-C15), 47,73% biodiesel (C16-C20) dan asam lemak 28,4%. Analisis sifat fisik menunjukan densitas 0,9631g/mL, titik tuang 12°C, titik nyala 49°C dan angka oktan 72,6. Kata kunci: catalytic cracking, crude biodiesel, angka oktan, biofuel. Crude biodiesel from transesterification of used cooking oil can be improved in quality through catalytic cracking using natural zeolite. This study aims to determine the optimum conditions for catalytic cracking and the physical and chemical properties of biofuels produced. The reaction was carried out in the reactor by varying the time (1, 2 and 3 hours), catalyst concentration (3, 5 and 7%), catalyst particle size (180, 250 and 630 μm) and reaction temperature (325, 350 and 375°C) . The optimum conditions for the catalytic cracking crude biodiesel process were obtained at: 3 hours, 7% catalyst concentration, catalyst particle size 180 μm and reaction temperature 375 ° C. The resulting biofuel contains 6.26% gasoline fraction (C5-C11); 17.6% kerosene (C12-C15), 47.73% biodiesel (C16-C20) and fatty acids 28.4%. Physical properties analysis showed density of 0.9631g/mL, pour point 12°C, flash point 49°C and octane number 72.6. Keywords: Catalytic cracking, crude biodiesel, octane number, biofuel.

Download Full-text