Organic Cultivation of Summer Groundnut using Cow-based Bio-enhancers and Botanicals

2020 ◽  
Author(s):  
R.K. Mathukia ◽  
S.K. Chhodavadia ◽  
L.C. Vekaria ◽  
M.S. Vasava
Keyword(s):  
Organic Farming ◽  
Fruits And Vegetables ◽  
Block Design ◽  
Kappaphycus Alvarezii ◽  
Scientific Information ◽  
Foliar Spray ◽  
Seaweed Extract ◽  
Growth And Yield ◽  
Yield Attributes ◽  
Organic Cultivation

Background: Recognizing the adverse impact of excessive use of chemicals on soil health, human health and environment, Government is promoting production of organic crops, fruits and vegetables etc. through various schemes. Demand for organic food items is also on the rise during the last few years. Number of cow-based bio-enhancers and botanicals have been developed by innovative organic growers/ associations and NGOs. But very meagre scientific information is available regarding such formulations. Hence, to incorporate these products in organic farming module, the present experiment was conducted.Methods: A field experiment was conducted in summer season of 2017 to 2019 at Junagadh, Gujarat, India with cow-based bio-enhancers (Panchagavya, Bijamrut, Jivamrut, Amrutpani, Sanjivak and cow urine) and botanicals (Seaweed extract and Banana pseudo stem sap) in randomized block design with three replications. The cow-based formulations were prepared on farm as per the procedure given by National Centre for Organic Farming, Ghaziabad and botanicals viz., banana pseudo stem extract and seaweed extract (Kappaphycus alvarezii) were obtained from Navsari Agricultural University, Navsari and Junagadh Agricultural University, Okha.Result: The results revealed that application of FYM @ 5 t/ha significantly enhanced growth and yield attributes viz., plant height, number of branches/plant, number and dry weight of nodules/plant, number of mature pods/plant, pod weight/plant and shelling percentage and ultimately produced significantly higher pod (1823 kg/ha) and haulm (3270 kg/ha) yields, followed by Panchagavya as foliar spray @ 3% at 30, 45 and 60 DAS (1582 and 2846 kg/ha) and seaweed extract as foliar spray @ 3.5% at 30, 45 and 60 DAS (1423 and 2570 kg/ha). Application of FYM, Panchagavya and seaweed extract also increased uptake of NPK by pod and haulm over the control, while different treatments failed to affect the post-harvest soil fertility except available P which is higher under FYM, Jivamrut, Amrutpani and Sanjivak over the control. Overall, application of FYM and Panchagavya accrued higher net return of `55285 and 46229/ha with B:C of 2.21 and 2.12, respectively.

Effect of nutrient management on productivity and economics of soybean

2017 ◽  
Vol 2 (02) ◽  
pp. 206-209
Author(s):  
Y. A. Bhosale ◽  
D. P. Pacharne
Keyword(s):  
Nutrient Management ◽  
Block Design ◽  
Foliar Spray ◽  
Growth And Yield ◽  
Silty Clay ◽  
Yield Attributes ◽  
Net Returns ◽  
Randomized Block Design ◽  
Stover Yield ◽  
Economic Indices

A field experiment was conducted during kharif season of 2015 on silty clay loam soil at MPKV, Rahuri (MS), to study the varying nutrient management levels on productivity and economics of different soybean varieties. The experiment was laid out in factorial randomized block design with 15 combinations of three varieties (KDS-344, JS-9305 and KS-103) and five nutrient management levels ( GRDF, 75% GRDF + 0.5% foliar spray of grade IInd at 30 and 45 DAS, 100% GRDF + 0.5% foliar spray of grade IInd at 30 and 45 DAS, N4: 125% GRDF + 0.5% foliar spray of grade IInd at 30 and 45 DAS and 50:75:30 N, P2O5, K2O kg ha-1 + 5 tons FYM ha-1. The variety KDS-344 and application of nutrient management dose 125% GRDF + 0.5 Grade IInd foliar spray at 30 and 45 DAS recorded significantly the highest growth and yield attributes viz., plant height (cm), number of branches, number root of nodules, number of pod plant-1 and weight of seeds plant-1 (g). The variety KDS-344 recorded highest grain and stover (3.66 and 4.64 t /ha) yield and highest economic indices like cost of cultivation (40,623), net monetary returns (87355) and net returns per rupee invested (3.17). The grain yield (4.34 t/ha) and stover yield (4.53 t/ha) of soybean was significantly higher by application of fertilizer dose of 125% GRDF + 0.5% Grade IInd foliar spray at 30 and 45 DAS than rest of treatments, but it was also at par with 75% GRDF + 0.5 Grade IInd foliar spray at 30 and 45 DAS and 100% GRDF + 0.5% Grade IInd foliar spray at 30 and 45 DAS. Similarly, variety KDS-344 and application of nutrient levels of 75 % GRDF + 0.5 % Grade IInd foliar spray at 30 and 45 DAS recorded the highest net returns (82756) and net returns per rupee invested (3.24) in soybean due to reduce in cost of cultivation (36931) and nutrient losses.

scholarly journals Effect of foliar application of moringa leaf extract on growth and yield of late sown wheat

2017 ◽  
Vol 3 (3) ◽  
pp. 323-329 ◽  
Author(s):  
Nusrat Zahan Jhilik ◽  
Tahsina Sharmin Hoque ◽  
Abu Zofar Md Moslehuddin ◽  
Md Anwarul Abedin
Keyword(s):  
Leaf Extract ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Growth And Yield ◽  
Growth Stages ◽  
Yield Attributes ◽  
Science Field ◽  
Straw Yield ◽  
Moringa Leaf Extract

Moringa oleifera leaf extract has a potential effect as a growth enhancer of many crops. An experiment was conducted at the Soil Science Field Laboratory of Bangladesh Agricultural University, Mymensingh, Bangladesh to evaluate the effect of foliar application of moringa leaf extract on growth and yield of late sown wheat (BARI Gom-26). The experiment was laid out in a randomized complete block design with six treatments and three replications. The treatments were T1 (Control), T2 [moringa leaf extract (MLE) sprayed only at tillering stage], T3 (MLE sprayed at tillering and jointing stages), T4 (MLE sprayed at tillering, jointing and booting stages), T5 (MLE sprayed at tillering, jointing, booting and heading stages), and T6 (MLE sprayed only at heading stage). Application of moringa leaf extract significantly increased the growth and yield attributes as well as grain and straw yield of wheat. Among various treatments with moringa leaf extract the performance of T4 (MLE sprayed at tillering, jointing and booting stages) was the best as it produced the tallest plant (87.87 cm), the highest fresh and dry weight of root (16.51 g and 11.37 g respectively), the highest number of spikelets spike-1 (19.70) and filled grains spike-1 (45.53), as well as the highest grain and straw yield (3.62 t ha-1 and 5.43 t ha-1 respectively) of wheat. Therefore, moringa leaf extract as a foliar spray can be applied at critical growth stages to increase the growth and yield potentiality of late sown wheat.Asian J. Med. Biol. Res. September 2017, 3(3): 323-329

scholarly journals Potential of Various Organic Nutrient Management Practices for Augmenting the Growth, Yield Attributes and Yield of Finger Millet [Eleusine coracana (L.) Gaertn]

2020 ◽  
pp. 126-135
Author(s):  
Sweta Shikta Mahapatra ◽  
N. Sunitha ◽  
Y. Reddi Ramu ◽  
F. H. Rahman
Keyword(s):  
Finger Millet ◽  
Nutrient Management ◽  
Block Design ◽  
Foliar Spray ◽  
Growth And Yield ◽  
Index Number ◽  
Area Index ◽  
Yield Attributes ◽  
Soil Application ◽  
Organic Nutrient

A field experiment was carried out during kharif, 2016 on sandy loam soils of dry land farm of S.V. Agricultural College, Tirupati, Acharya N.G. Ranga Agricultural University. The experiment was laid out in randomized block design with three replications. There were eight treatments viz., control (T1), 100% RDF (60:30:30 kg ha-1 N:P2O5:K2O) (T2), 100% N through farm yard manure (FYM) (T3), 100% N through FYM + seedling treatment with biofertilizers (Azospirillum+ PSB) (T4), Seedling treatment with beejamruta + soil application of jeevamruta @ 500 l ha-1 just after transplanting and at every 10 days interval upto 15 days before harvest (T5), Seedling treatment with beejamruta + foliar application of panchagavya @ 3% foliar spray at every 10 days interval up to 15 days before harvest (T6), T3 + T5 (T7) and T3+ T6 (T8). The test variety of finger millet was ‘Vakula’. The growth and yield attributing parameters i.e., plant height, leaf area index, number of tillers m-2 and dry matter production at harvest, number of productive tillers m-2 and ear weight, yield and economics of finger millet crop were found to be significantly influenced by various sources of nutrients. In conclusion, the investigation revealed that higher grain yield of finger millet as well as economic returns could be realized with 100% recommended dose of nutrients through fertilizers. Among the various organic sources of nutrients tried, 100% N through FYM + seedling treatment with beejamruta + soil application of jeevamruta @ 500 l ha-1 just after transplanting and at every 10 days interval up to 15 days before harvest (T7) was proved to be the most promising integrated organic nutrient management practice for higher yield, economics of finger millet along with maintenance of soil biological activity as well as fertility for the sustenance of soil ecology in the present domain of study.

scholarly journals Response of Chickpea (Cicer Arietinum L.) To Boron and Molybdenum Fertilization

2021 ◽  
Vol 29 (2) ◽  
pp. 43-51
Author(s):  
A Hoque ◽  
MS Alam ◽  
S Khatun ◽  
M Salahin
Keyword(s):  
Seed Yield ◽  
Block Design ◽  
Foliar Spray ◽  
Seed Priming ◽  
Growth And Yield ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Two Factors ◽  
Biological Yield ◽  
1000 Grain Weight

An experiment was conducted to study the effect of micronutrients on the growth and yield performance of chickpea. The experiment was consisted using two factors- variety and treatments. Two local cultivars viz. BARI Chola-5 and BARI Chola-9 and five treatments e.g. T0 = control, T1 = 2 kg B/ha, T2 = 2 kg Mo/ha, T3= seed priming with Mo (1g/l water), T4 = foliar spray of B (0.5 g/l water) + seed priming with Mo (1g/l water), and T5 = 2 kg B/ha + seed priming with Mo (1g/l water) were considered for this study. A randomized complete block design (RCBD) was adopted with three replications. Significant variation was observed between the varieties and here the BARI Chola-9 produced the higher seed yield (2.47 ton/ ha). Treatment showed significant effect on the yield attributes and yield of chickpea. The highest plant height, number of branches/ plant, number of pods/ plant, nodule/ plant, number of effective pod/ plant, length of the pod, 1000-grain weight, seed yield, straw yield, biological yield was obtained from T4. The highest seed yield (2.68 ton/ ha) was recorded from BARI Chola-9 with foliar spray of boron and seed priming with Mo. The results indicated that foliar spray of B and seed priming with molybdenum can be beneficial in improving growth and yield of chickpea variety BARI Chola-9. J. Bio-Sci. 29(2): 43-51, 2021 (December)

scholarly journals Effect of foliar application of zinc and boron on growth and yield of cauliflower (Brassica oleracea var.bortrytis L.)

2020 ◽  
pp. 386-389
Author(s):  
AMAN AGNIHOTRI
Keyword(s):  
Brassica Oleracea ◽  
Vegetative Growth ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Growth And Yield ◽  
Rabi Season ◽  
Yield Attributes ◽  
Combined Application ◽  
Randomized Block Design

The field experiment was carried out during rabi season of 2018-2019 at Research farm, Raja Balwant Singh College, Bichpuri Agra,(U.P) to study the effect of different concentrations of zinc and boron as foliar spray on the vegetative growth and yield of cauliflower (Brassica oleracea var.bortrytis). Nine treatments with three replications were evaluated in randomized block design. The results revealed that the maximum plant height (44.90 cm), diameter of stem (1.68cm), length (38.90 cm) and width (24.55 cm) of longest leaf were recorded with the foliar spray of 0.50% Zn + 0.2% boron solution .The maximum values of spread of plant along the row(53.51cm)and across the row (55.25 cm) and fully opened leaves per plant (12.94) were recorded with the foliar spray of 0.25% Zn +0.2% boron solution. The yield of cauliflower curd was recorded maximum (343.46 q ha-1) with foliar application of Zn (0.50%) + boron (0.2%). The increase in yield with this treatment was 23.9 % higher than obtained with control (277.13 q ha-1).The lower values of growth and yield attributes were recorded under control .In general combined application of zinc and boron was found significantly superior over their alone application

scholarly journals Effect of biostimulants on the yield of bush bean (Lablab purpureus var. typicus)

2021 ◽  
pp. 66-70
Author(s):  
V.M. PRIYADARSHINI
Keyword(s):  
Tamil Nadu ◽  
Block Design ◽  
Foliar Spray ◽  
Seaweed Extract ◽  
Net Income ◽  
Lablab Purpureus ◽  
Yield Attributes ◽  
Randomized Block Design ◽  
Bush Bean ◽  
Pod Length

A field experiment was conducted assess the influences of biostimuants on the yield of bush bean cv. Co (Gb) 14 at Poothurai village, Tamil Nadu during kharif season of 2019 in randomized block design with nine treatments and three replications. Biostimulants adopted for the study were seaweed extract, panchagavya, chitosan and effective microorganism with two different concentrations applied as foliar spray on 30, 45 and 60 days after sowing.Results revealed that the maximum values of yield parameters viz., length of the raceme(51.2 cm), number of racemes plant-1(8.5), number of flowers raceme-1 (26.4), number of flowers (221.5), days to 50 % flowering (36.6 days), number of pods plant-1(41.6), pod length (10.6 cm), pod width (3.2 cm), single pod weight (4.6 g), number of seeds (5.2), total pod yield (12.6 t/ha), net income (Rs. 1,71,628 ha-1) and B:C ratio (3.14)were recorded under the treatment of seaweed extract (5mL-1) + RDF. The RDF + 3% panchagavya proved next best treatment in respect of these parameters. Among all the biostimulants, seaweed proved superior to others in respect of flowering and yield attributes. The minimum values of all these characters were recorded under control

scholarly journals Effect of Seaweeds on Growth and Yield of Boro Rice (Oryza sativa L.)

2020 ◽  
pp. 28-34
Author(s):  
Madhusri Pramanik ◽  
Dhananjoy Dutta ◽  
Indranil Samui
Keyword(s):  
West Bengal ◽  
Foliar Application ◽  
Oryza Sativa L ◽  
Block Design ◽  
Foliar Spray ◽  
Seaweed Extract ◽  
Growth And Yield ◽  
Cost Ratio ◽  
Residual Soil ◽  
Boro Rice

Introduction: Seaweed extract, an organic bio-stimulant has emerged as a promising tool for increasing crop growth and yield without affecting soil health and environment. Aim: i) To study the efficacy of seaweed extract on growth and yield of boro rice ii) To evaluate the nutrients uptake and residual soil fertility under different treatments iii)To assess the economic viability of using the bio-stimulants in rice production. Study Design:  Seven treatments were laid out inrandomized block design with three replications. Place and Duration of the Study: Boro seasons of 2016-17 and 2017-18 at Instructional Farm of BCKV, Nadia, under new alluvial zone of West Bengal. Methods: Field experiment was carried out in boro (summer) rice (cv. Satabdi) with seven treatments viz., T1-100% RDF (120:60:60 kg/ha N, P2O5 and K2O), T2-100% RDF+ biozyme liquid @ 2.5ml/l of water (seed soaking), T3-100% RDF + biozyme liquid @ 10ml/l of water (root dipping), T4- 100% RDF+ biozyme granule @15 kg/ha (soil application at 15 and 45 DAT)+ liquid @ 625 ml/ha (foliar spray at 15 and 45 DAT), T5-75% RDF + biozyme liquid, T6-75% RDF+ biozyme granule+ liquid  and T7-75% RDF+ amaze-X granule @ 10kg/ha at 45 DAT + biozymegranule + liquid. Results: Results revealed that the maximum grain yield (4.88 t/ ha) was obtained under T7 followed by T4 and T6, however, the net return (Rs.25576/ha) and benefit-cost ratio (1.51) of T6 treatment gave maximum. Conclusion: It may be concluded that T7 treatment performed best in terms of growth and yield of Boro rice but T6 treatment gave the highest B:C ratio and net income which is supposed to be more economical to the small and marginal farmers. Therefore, integrated use of 75% RDF and biozyme soil & foliar application can be recommended for boro rice under new alluvial zone of West Bengal.

Effect of Integration of Fertilizers and FYM on Productivity and Soil Health of Rainfed Potato

2017 ◽  
Vol 4 (1) ◽  
Author(s):  
S. K. YADAV ◽  
A. K. SRIVASTAVA ◽  
T. K. BAG
Keyword(s):  
Nutrient Management ◽  
Block Design ◽  
Soil Health ◽  
Growth And Yield ◽  
Recommended Dose ◽  
Research Station ◽  
Yield Attributes ◽  
Hill Region ◽  
North Eastern ◽  
Synthetic Fertilizers

A field trial was conducted during two consecutive summer seasons of2012 and 2013 at ICAR-Central Potato Research Station, Shillong, Meghalaya to evaluate the integration of nutrient sources on productivity and soil health under rainfed potato cultivation in north eastern hill region of India. There were six treatments of integrated nutrient management viz., 100% Recommended dose of fertilizers,75% RDF through synthetic fertilizers and 25% recommended dose of nitrogen (RDN) through FYM, 50% RDF and 50% RDN through FYM, 25% RDF and 75% RDN through FYM, 100% RDN through FYM and control (no application of any sources of nutrients). The experiment was laid out in randomized block design with four replications. Nutrient management practices showed the significant improvement on growth and yield attributes of potato over control plot. Highest productivity of potato tubers (t/ha) was noticed with application of 75% RDF through synthetic fertilizers along with 25% RDN through FYM. Similarly, the maximum net return was associated with application of 75% RDF and 25% RDN through FYM under investigation. Application of 75% Recommended dose of nutrients through synthetic fertilizers in combination with 25% Recommended dose of nitrogen through FYM was more profitable for sustainable production of potato in the north eastern hill region of India.

scholarly journals Effects of Cover Methods and Nitrogen Levels on the Growth and Yield of Tomato

2021 ◽  
Vol 4 (2) ◽  
pp. 1021-1033
Author(s):  
Nguyen Thi Loan ◽  
Tran Thi My Can
Keyword(s):  
Yield Components ◽  
Field Experiments ◽  
Block Design ◽  
Tomato Fruit ◽  
Dry Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Yield Attributes ◽  
Black Plastic

To study the effects of cover methods and nitrogen (N) levels on the growth and yield components of tomato Cv. Pear F1, field experiments with a 4x3 factorial design were conducted in the 2019 spring and winter seasons using a randomized complete block design with three replications. The cover methods included four treatments: bare soil (BS), black plastic mulch (BPM), transparent polypropylene row cover (RC), and a combination of BPM and RC (BPMRC) with the RC removed approximately 30 days after transplanting. Nitrogen (N) was applied at three levels (150, 180, and 210 kg N ha-1). Using BPM and RC generally led to an increased air temperature, air humidity, soil moisture, and soil temperature compared to the BS treatment. Higher N rates (180 and 210 kg N ha-1) did not result  in different tomato fruit sizes and fruit weights but positively increased fruit yield and quality (Brix values and fruit dry weight) as compared to the 150 kg N ha-1 addition. The cover methods positively affected the yield components and fruit yield of tomato as well as the fruit characteristics compared to the BS treatment. Using cover materials (BPM and RC) combined with a higher N application significantly increased the yield attributes and fruit yield. The highest fruit yield was achieved under the mulching treatment by black plastic (BPM treatment) combined with a 210 kg N ha-1 application, resulting in 50.90 tons ha-1 in the spring and 58.27 tons ha-1 in the winter.

scholarly journals GROWTH AND YIELD EVALUATION OF MUSTARD VARIETIES GROWN IN A MEDIUM HIGHLAND OF KHULNA REGION

2021 ◽  
Vol 18 (1) ◽  
pp. 1-8
Keyword(s):  
Seed Weight ◽  
Harvest Index ◽  
Block Design ◽  
Growth Yield ◽  
Growth And Yield ◽  
Rabi Season ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Stover Yield ◽  
Number Of Seeds

The present research was conducted at the experimental field of Agrotechnology Discipline, Khulna University, Khulna during Rabi season 2016-17 to investigate the growth and yield performance of mustard varieties. The experiment was arranged in a randomized complete block design consisting of eight mustard varieties (viz. BARI Sarisha-8, BARI Sarisha-11, BARI Sarisha-13, BARI Sarisha-14, BARI Sarisha-15, BARI Sarisha-16, Rai and Tori-7) as treatment and replicated thrice. All the growth, yield attributes and yield were substantially influence among the mustard varieties except the phenological parameters. Results of the experiment showed that the highest plant height (131.33 cm), seed yield (1813.33 kg ha-1) and stover yield (3876.67 kg ha-1) were found in BARI Sarisha-16. BARI Sarisha-11 was found better in respect of maximum siliqua plant-1, weight of seeds plant-1, 1000-seed weight and harvest index. Besides this, BARI Sarisha-14 showed the maximum number of seeds siliqua-1. Therefore, findings of this study suggested that BARI Sarisha-16 would be suitable for better productivity and recommended for cultivation in the medium highland of Khulna region of Bangladesh.

Sign in / Sign up

Export Citation Format

Share Document