scholarly journals Displacement Formulations for Deformation and Vibration of Elastic Circular Torus

2021 ◽  
Author(s):  
bohua sun
Keyword(s):  
Free Vibration ◽  
Gaussian Curvature ◽  
Turning Point ◽  
Closed Form Solution ◽  
Complex Form ◽  
Form Solution ◽  
Element Analysis ◽  
Displacement Boundary ◽  
Engineering Mechanics ◽  
Maple Code

The formulation used by most of the studies on an elastic torus are either Reissner mixed formulation or Novozhilov's complex-form one, however, for vibration and some displacement boundary related problem of a torus, those formulations face a great challenge. It is highly demanded to have a displacement-type formulation for the torus. In this paper, I will carry on my previous work [ B.H. Sun, Closed-form solution of axisymmetric slender elastic toroidal shells. J. of Engineering Mechanics, 136 (2010) 1281-1288.], and with the help of my own maple code, I am able to simulate some typical problems and free vibration of the torus. The numerical results are verified by both finite element analysis and H. Reissner's formulation. My investigations show that both deformation and stress response of an elastic torus are sensitive to the radius ratio, and suggest that the analysis of a torus should be done by using the bending theory of a shell, and also reveal that the inner torus is stronger than outer torus due to the property of their Gaussian curvature. Regarding the free vibration of a torus, our analysis indicates that both initial in u and w direction must be included otherwise will cause big errors in eigenfrequency. One of the most intestine discovery is that the crowns of a torus are the turning point of the Gaussian curvature at the crown where the mechanics' response of inner and outer torus is almost separated.

scholarly journals Deformation and Vibration of an Oblique Elliptic Torus

2021 ◽  
Author(s):  
Bohua Sun
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Response ◽  
Free Vibration ◽  
Gaussian Curvature ◽  
Related Problem ◽  
Complex Form ◽  
Great Difficulty ◽  
Element Analysis ◽  
Displacement Boundary

The formulation used by the most of studies on an elastic torus are either Reissner mixed formulation or Novozhilov's complex-form one, however, for vibration and some displacement boundary related problem of the torus, application of those formulations has encountered great difficulty. It is highly demanded to have a displacement-type formulation for the torus. In this paper, I will simulate some typical problems and free vibration of the torus. The numerical results are verified by both finite element analysis and H. Reissner's formulation. My investigations show that both deformation and stress response of an elastic torus are sensitive to the radius ratio, and suggest that the analysis of a torus should be done by using the bending theory of a shell, and also reveal that the inner torus is stronger than outer torus due to the property of their Gaussian curvature. Regarding the free vibration of the torus, our analysis indicates that both initial in u and w direction must be included otherwise will cause big errors in eigenfrequency.

scholarly journals Determination of Constraint-Modified J-R Curves for Carbon Steel Storage Tanks

2002 ◽  
Author(s):  
P.-S. Lam ◽  
Y. J. Chao ◽  
X.-K. Zhu ◽  
Y. Kim ◽  
R. L. Sindelar
Keyword(s):  
Carbon Steel ◽  
Test Data ◽  
Storage Tank ◽  
Closed Form Solution ◽  
Crack Tip ◽  
Form Solution ◽  
Fracture Parameter ◽  
Element Analysis ◽  
Crack Tip Constraint ◽  
Senb Specimen

Mechanical testing of A285 carbon steel, a storage tank material, was performed to develop fracture properties based on the constraint theory of fracture mechanics. A series of single edge-notched bend (SENB) specimen designs with various levels of crack tip constraint were used. The variation of crack tip constraint was achieved by changing the ratio of the initial crack length to the specimen depth. The test data show that the J-R curves are specimen-design-dependent, which is known as the constraint effect. A two-parameter fracture methodology is adopted to construct a constraint-modified J-R curve, which is a function of the constraint parameter, A2, while J remains the loading parameter. This additional fracture parameter is derived from a closed form solution and can be extracted from the finite element analysis for a specific crack configuration. Using this set of SENB test data, a mathematical expression representing a family of the J-R curves for A285 carbon steel can be developed. It is shown that the predicted J-R curves match well with the SENB data over an extensive amount of crack growth. In addition, this expression is used to predict the J-R curve of a compact tension specimen (CT), and reasonable agreement to the actual test data is achieved. To demonstrate its application in a flaw stability evaluation, a generic A285 storage tank with a postulated axial flaw is used. For a flaw length of 10% of the tank height, the predicted J-R curve is found to be similar to that for a SENB specimen with a short notch, which is in a state of low constraint. This implies that the use of a J-R curve from the ASTM (American Society for Testing and Materials) standard designs, which typically are high constraint specimens, may be overly conservative for analysis of fracture resistance of large structures.

Analytical and Numerical Studies of a Thick Anisotropic Multilayered Fiber-Reinforced Composite Pressure Vessel

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Isaiah Ramos ◽  
Young Ho Park ◽  
Jordan Ulibarri-Sanchez
Keyword(s):  
Finite Element ◽  
Pressure Vessel ◽  
Structural Damage ◽  
Three Dimensional ◽  
Closed Form Solution ◽  
Form Solution ◽  
Fiber Reinforced ◽  
Element Analysis ◽  
Analytical Results ◽  
Composite Pressure Vessel

In this paper, we developed an exact analytical 3D elasticity solution to investigate mechanical behavior of a thick multilayered anisotropic fiber-reinforced pressure vessel subjected to multiple mechanical loadings. This closed-form solution was implemented in a computer program, and analytical results were compared to finite element analysis (FEA) calculations. In order to predict through-thickness stresses accurately, three-dimensional finite element meshes were used in the FEA since shell meshes can only be used to predict in-plane strength. Three-dimensional FEA results are in excellent agreement with the analytical results. Finally, using the proposed analytical approach, we evaluated structural damage and failure conditions of the composite pressure vessel using the Tsai–Wu failure criteria and predicted a maximum burst pressure.

Validation of Nitinol SMA Characteristics Using Finite Element Analysis and Closed Form Solutions

2013 ◽  
Vol 856 ◽  
pp. 147-152
Author(s):  
S.H. Adarsh ◽  
U.S. Mallikarjun
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Closed Form ◽  
Closed Form Solution ◽  
Form Solution ◽  
Fe Analysis ◽  
Element Analysis ◽  
Complex Behaviour ◽  
Closed Form Solutions

Shape Memory Alloys (SMA) are promising materials for actuation in space applications, because of the relatively large deformations and forces that they offer. However, their complex behaviour and interaction of several physical domains (electrical, thermal and mechanical), the study of SMA behaviour is a challenging field. Present work aims at correlating the Finite Element (FE) analysis of SMA with closed form solutions and experimental data. Though sufficient literature is available on closed form solution of SMA, not much detail is available on the Finite element Analysis. In the present work an attempt is made for characterization of SMA through solving the governing equations by established closed form solution, and finally correlating FE results with these data. Extensive experiments were conducted on 0.3mm diameter NiTinol SMA wire at various temperatures and stress conditions and these results were compared with FE analysis conducted using MSC.Marc. A comparison of results from finite element analysis with the experimental data exhibits fairly good agreement.

Bending and free vibration analysis of foam-filled truss core sandwich panel

2016 ◽  
Vol 20 (5) ◽  
pp. 617-638 ◽  
Author(s):  
MP Arunkumar ◽  
Jeyaraj Pitchaimani ◽  
KV Gangadharan
Keyword(s):  
Free Vibration ◽  
Vibration Analysis ◽  
Sandwich Panel ◽  
Closed Form Solution ◽  
Free Vibration Analysis ◽  
Element Model ◽  
Form Solution ◽  
Numerical Comparison ◽  
Truss Core ◽  
Foam Filled

This paper presents the studies carried out on bending and free vibration behavior of truss core sandwich panel filled with foam typically used in aerospace applications. Equivalent stiffness properties for foam-filled truss core sandwich panel are derived by idealizing 3D foam-filled sandwich panel to an equivalent 2D orthotropic thick plate continuum. The accuracy of the derived elastic property is ensured by the numerical comparison of free vibration response of 3D and its equivalent 2D finite element model. The derived stiffness constants were used in closed form solution to evaluate the maximum deflection of the continuum. The results show that the free vibration and static behavior of the sandwich panel can be enhanced in due consideration to the space constraint by filling foam in the empty space of core. The results also reveal that triangular core foam-filled sandwich panel deflects less compared to other cores. From the free vibration analysis, effect of filling foam is effective in cellular and trapezoidal core.

Free Vibration of a Multilayered One-Dimensional Quasi-Crystal Plate

2014 ◽  
Vol 136 (4) ◽  
Author(s):  
Natalie Waksmanski ◽  
Ernian Pan ◽  
Lian-Zhi Yang ◽  
Yang Gao
Keyword(s):  
Free Vibration ◽  
Natural Frequencies ◽  
Closed Form Solution ◽  
Form Solution ◽  
Crystal Plate ◽  
Mode Shapes ◽  
Sandwich Plates ◽  
One Dimensional ◽  
Propagator Matrix ◽  
Multilayered Plates

An exact closed-form solution of free vibration of a simply supported and multilayered one-dimensional (1D) quasi-crystal (QC) plate is derived using the pseudo-Stroh formulation and propagator matrix method. Natural frequencies and mode shapes are presented for a homogenous QC plate, a homogenous crystal plate, and two sandwich plates made of crystals and QCs. The natural frequencies and the corresponding mode shapes of the plates show the influence of stacking sequence on multilayered plates and the different roles phonon and phason modes play in dynamic analysis of QCs. This work could be employed to further expand the applications of QCs especially if used as composite materials.

Strengthening of wide-flange columns under load

1990 ◽  
Vol 17 (5) ◽  
pp. 835-843 ◽  
Author(s):  
H. Marzouk ◽  
S. Mohan
Keyword(s):  
Finite Element ◽  
Residual Stresses ◽  
Critical Load ◽  
Closed Form Solution ◽  
Welding Process ◽  
Form Solution ◽  
Element Analysis ◽  
Welding Stress ◽  
Existing Structures ◽  
Welding Sequence

The present work deals with formulation of theoretical and analytical methods leading to the development of column strength curves. The formulations were developed for both elastic and inelastic behaviour. Two types of reinforcement have been developed for strengthening the W-shape columns under load. Since the column strength curves are based in part on the magnitude and distribution of residual stresses, it is extremely important to consider the new pattern of residual stresses due to welding process. Also, the welding sequence will affect the magnitude and distribution of residual stresses. Theoretical formulations leading to a closed-form solution for the prediction of critical load were developed for two types of strengthening using the superposition of original residual, new welding, and initial loading stresses. A nonlinear finite element analysis based on the large deformation theory of stability was used to predict the strengthened column critical load. It takes into consideration the effect of cooling residual stresses and new welding residual stresses. The formulations were incorporated with gradual penetration of yielding, the spreading of inelastic zones along the member length, the presence of residual stresses, and strain hardening of the material. Experiments were carried out to determine the actual capacity of strengthened columns. Seven specimens were tested using two and four strengthening plates. The welding stresses were measured through a series of experiments, and it was found that the parabolic distribution is a very close approximation to the actual new welding stress distribution. Key words: reinforcement of steel columns, welding stresses, welding sequence, strengthening of existing structures, buckling, steel plating, finite element.

Using Isochronous Method to Calculate Creep Damage in Pressure Vessel Components: Part 2

2017 ◽  
Author(s):  
Chithranjan Nadarajah ◽  
Benjamin F. Hantz ◽  
Sujay Krishnamurthy
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Pressure Vessel ◽  
Closed Form Solution ◽  
Creep Damage ◽  
Form Solution ◽  
Creep Model ◽  
Stress Strain ◽  
Element Analysis ◽  
Good Agreement

This paper is Part 2 of two papers illustrating how isochronous stress strain curves can be used to calculate creep stresses and damage for pressure vessel components. Part 1 [1], illustrated the use of isochronous stress strain curves to obtain creep stresses and damages on two simple example problems which were solved using closed form solution. In Part 2, the isochronous method is implemented in finite element analysis to determine creep stresses and damages on pressure vessel components. Various different pressure vessel components are studied using this method and the results obtained using this method is compared time explicit Omega creep model. The results obtained from the isochronous method is found to be in good agreement with the time explicit Omega creep model.

Sign in / Sign up

Export Citation Format

Share Document