Enhancing the Autonomy of Teleoperated Redundant Manipulators Through Fusion of Intelligent Control Modules

2002 ◽  
Vol 14 (3) ◽  
pp. 278-289 ◽  
Author(s):  
D. P. Thrishantha Nanayakkara ◽  
◽  
Kazuo Kiguchi ◽  
Tsukasa Murakami ◽  
Keigo Watanabe ◽  
...  
Keyword(s):  
Force Control ◽  
Degrees Of Freedom ◽  
Null Space ◽  
Redundancy Resolution ◽  
Control Task ◽  
Industrial Manipulator ◽  
Moving Obstacles ◽  
Vision Sensors ◽  
Fuzzy Neural ◽  
On Line

This paper presents a method for redundancy resolution of an industrial manipulator in a teleoperated force control task. A seven degree-of-freedom (DOF) industrial manipulator manufactured by the Mitsubishi Heavy Industries Ltd. is used for experiments. The task involves obeying a force command sent from a remote computer while autonomously adapting the posture to avoid unexpected obstacles moving toward the manipulator. Redundancy resolution is employed for autonomous adaptation of the configuration to avoid the obstacle while continuing the force control task. This self-adaptive skill on the slave manipulator side is very important because teleoperation is often performed in dangerous or partially unknown environments where unexpected changes such as moving obstacles can well be expected. In such situations, the control ability of the master side is very limited due to the practical limitations of vision sensors to capture a comprehensive view of the environment and the limitations of the degrees of freedom on the master manipulator. The proposed method relies on two modules of an intelligent controller on the slave side. The first is an on-line fuzzy neural network (FNN) for intelligent force control, and the second is a configuration controller that works in harmony with the first to exploit redundancy to react to avoid moving obstacles such that the latter does not inhibit the progress of the former. The second controller generates joint velocity commands in null space of the hand Jacobian, so that its activation does not affect the force controller. Here we show that the proposed method can skillfully avoid a moving obstacle without stopping the force control task. This skillful adaptation ability can significantly improve the efficiency and safety of teleoperated force control tasks with less burden on the master side. This paper presents some promising experimental results to demonstrate the effectiveness of the proposed method.

On-line multi-criteria based collision-free posture generation of redundant manipulator in constrained workspace

Robotica ◽  
2002 ◽  
Vol 20 (6) ◽  
pp. 625-636 ◽  
Author(s):  
Jin-Liang Chen ◽  
Jing-Sin Liu ◽  
Wan-Chi Lee ◽  
Tzu-Chen Liang
Keyword(s):  
Null Space ◽  
Large Degree ◽  
Redundancy Resolution ◽  
Secondary Tasks ◽  
End Effector ◽  
Robotic Arms ◽  
Tracking Motion ◽  
On Line ◽  
Joint Limits ◽  
Joint Velocity

The manipulator with a large degree of redundancy is useful for realizing multiple tasks such as maneuvering the robotic arms in the constrained workspace, e.g. the task of maneuvering the end-effector of the manipulator along a pre-specified path into a window. This paper presents an on-line technique based on a posture generation rule to compute a null-space joint velocity vector in a singularity-robust redundancy resolution method. This rule suggests that the end of each link has to track an implicit trajectory that is indirectly resulted from the constraint imposed on tracking motion of the end-effector. A proper posture can be determined by sequentially optimizing an objective function integrating multiple criteria of the orientation of each link from the end-effector toward the base link as the secondary task for redundancy resolution, by assuming one end of the link is clamped. The criteria flexibly incorporate obstacle avoidance, joint limits, preference of posture in tracking, and connection of posture to realize a compromise between the primary and secondary tasks. Furthermore, computational demanding of the posture is reduced due to the sequential link-by-link computation feature. Simulations show the effectiveness and flexibility of the proposed method in generating proper postures for the collision avoidance and the joint limits as a singularity-robust null-space projection vector in maneuvering redundant robots within constrained workspaces.

Force strategies for on-line obstacle avoidance for redundant manipulators

Robotica ◽  
2003 ◽  
Vol 21 (6) ◽  
pp. 633-644 ◽  
Author(s):  
Leon Zlajpah ◽  
Bojan Nemec
Keyword(s):  
Obstacle Avoidance ◽  
Degrees Of Freedom ◽  
Null Space ◽  
Tactile Sensor ◽  
The Body ◽  
Stiff Systems ◽  
Task Space ◽  
Planar Manipulators ◽  
On Line ◽  
Time Varying Environment

The paper deals with on-line obstacle avoidance in an unstructured environment based on the force strategy. The obstacle avoidance is considered as a control problem. We discuss three approaches regarding the sensors used to detect the obstacles. First we investigate how obstacles can be avoided without using any sensors to detect them. To solve the problem we make use of a very basic principle: an action causes a reaction. For backdrivable manipulators we propose a controller which ensures stiff behaviour in the task space and compliant behaviour in the null space. Using such control the tracking capabilities in the task space can be preserved and the redundant degrees of freedom are used to avoid the obstacle after the collision. The tactile sensors are proposed to be used as the alternative for stiff systems. A tactile sensor detects an obstacle and the controller generates the avoiding motion. Last, we present a virtual forces approach which can be applied to the systems with proximity sensors. The objective is to assign each point on the body of the manipulator, which is close to the obstacle force component in a direction that is away from the obstacle. The proposed formulation avoids the problem of singular configurations and is very suitable when many obstacles are present in the neighbourhood of the manipulator. The computational efficiency of the proposed algorithms allows real-time application in a unstructured or time-varying environment. The efficiency of the proposed control algorithms is illustrated by simulations of highly redundant planar manipulators and by experiments on a four link planar manipulator.

Effects of Dynamic Model Errors in Task-Priority Operational Space Control

Robotica ◽  
2021 ◽  
pp. 1-12
Author(s):  
Paolo Di Lillo ◽  
Gianluca Antonelli ◽  
Ciro Natale
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Null Space ◽  
Control Algorithms ◽  
Model Errors ◽  
Operational Space ◽  
Dynamic Level ◽  
Concurrent Tasks ◽  
Modeling Errors

SUMMARY Control algorithms of many Degrees-of-Freedom (DOFs) systems based on Inverse Kinematics (IK) or Inverse Dynamics (ID) approaches are two well-known topics of research in robotics. The large number of DOFs allows the design of many concurrent tasks arranged in priorities, that can be solved either at kinematic or dynamic level. This paper investigates the effects of modeling errors in operational space control algorithms with respect to uncertainties affecting knowledge of the dynamic parameters. The effects on the null-space projections and the sources of steady-state errors are investigated. Numerical simulations with on-purpose injected errors are used to validate the thoughts.

Estimation of the Thermodynamic Properties of Branched Hydrocarbons

2000 ◽  
Vol 122 (3) ◽  
pp. 147-152 ◽  
Author(s):  
Hui He ◽  
Mohamad Metghalchi ◽  
James C. Keck
Keyword(s):  
Thermodynamic Properties ◽  
Degrees Of Freedom ◽  
Statistical Thermodynamic ◽  
Motion Modes ◽  
Branched Alkanes ◽  
Branched Hydrocarbons ◽  
Wide Range ◽  
On Line ◽  
Kinetic Calculations ◽  
Good Agreement

A simple model has been developed to estimate the sensible thermodynamic properties such as Gibbs free energy, enthalpy, heat capacity, and entropy of hydrocarbons over a wide range of temperatures with special attention to the branched molecules. The model is based on statistical thermodynamic expressions incorporating translational, rotational and vibrational motions of the atoms. A method to determine the number of degrees of freedom for different motion modes (bending and torsion) has been established. Branched rotational groups, such as CH3 and OH, have been considered. A modification of the characteristic temperatures for different motion mode has been made which improves the agreement with the exact values for simple cases. The properties of branched alkanes up to 2,3,4,-trimthylpentane have been calculated and the results are in good agreement with the experimental data. A relatively small number of parameters are needed in this model to estimate the sensible thermodynamic properties of a wide range of species. The model may also be used to estimate the properties of molecules and their isomers, which have not been measured, and is simple enough to be easily programmed as a subroutine for on-line kinetic calculations. [S0195-0738(00)00902-X]

Design, Construction and Control of a Remotely Operated Vehicle (ROV)

2011 ◽  
Author(s):  
Alireza Marzbanrad ◽  
Jalil Sharafi ◽  
Mohammad Eghtesad ◽  
Reza Kamali
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Remotely Operated Vehicle ◽  
Six Degrees Of Freedom ◽  
Depth Sensors ◽  
Control Schemes ◽  
On Line ◽  
Operation Unit ◽  
And Control ◽  
Design Construction

This is report of design, construction and control of “Ariana-I”, an Underwater Remotely Operated Vehicle (ROV), built in Shiraz University Robotic Lab. This ROV is equipped with roll, pitch, heading, and depth sensors which provide sufficient feedback signals to give the system six degrees-of-freedom actuation. Although its center of gravity and center of buoyancy are positioned in such a way that Ariana-I ROV is self-stabilized, but the combinations of sensors and speed controlled drivers provide more stability of the system without the operator involvement. Video vision is provided for the system with Ethernet link to the operation unit. Control commands and sensor feedbacks are transferred on RS485 bus; video signal, water leakage alarm, and battery charging wires are provided on the same multi-core cable. While simple PI controllers would improve the pitch and roll stability of the system, various control schemes can be applied for heading to track different paths. The net weight of ROV out of water is about 130kg with frame dimensions of 130×100×65cm. Ariana-I ROV is designed such that it is possible to be equipped with different tools such as mechanical arms, thanks to microprocessor based control system provided with two directional high speed communication cables for on line vision and operation unit.

Cooperation and Null-Space Control of Networked Omni-Directional Mobile Manipulators

2020 ◽  
Author(s):  
Michael John Chua ◽  
Yen-Chen Liu
Keyword(s):  
Degrees Of Freedom ◽  
Null Space ◽  
Kinematic Model ◽  
Mobile Manipulator ◽  
Main Task ◽  
Mobile Manipulators ◽  
Robot Arm ◽  
Task Space ◽  
End Effector ◽  
Mobile Base

Abstract This paper presents cooperation and null-space control for networked mobile manipulators with high degrees of freedom (DOFs). First, kinematic model and Euler-Lagrange dynamic model of the mobile manipulator, which has an articulated robot arm mounted on a mobile base with omni-directional wheels, have been presented. Then, the dynamic decoupling has been considered so that the task-space and the null-space can be controlled separately to accomplish different missions. The motion of the end-effector is controlled in the task-space, and the force control is implemented to make sure the cooperation of the mobile manipulators, as well as the transportation tasks. Also, the null-space control for the manipulator has been combined into the decoupling control. For the mobile base, it is controlled in the null-space to track the velocity of the end-effector, avoid other agents, avoid the obstacles, and move in a defined range based on the length of the manipulator without affecting the main task. Numerical simulations have been addressed to demonstrate the proposed methods.

Sign in / Sign up

Export Citation Format

Share Document