scholarly journals Research of processes in a converter with four-zone voltage regulation and electromechanical load

2021 ◽  
pp. 39-41
Author(s):  
Vladyslav Mykhailenko ◽  
Vadym Svyatnenko ◽  
Yuliya Chunyak ◽  
Vladyslav Bachynskiy
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Output Voltage ◽  
Electric Circuit ◽  
Electric Circuits ◽  
Semiconductor Converter ◽  
Semiconductor Converters ◽  
Electromagnetic Processes ◽  
Three Phase ◽  
The Mathematical Model

The new mathematical models of the electromagnetic processes is designed in three-phase electric circuit of the semiconductor converters with many-server zoned regulation phases voltages disregarding losses in semiconductor commutator for quick estimation of the influence parameter loads on level and form of the output voltage. mathematical model of the semiconductor converter is also used for study of the connecting processes in semiconductor converter with actively-inductive load. Will develop the method multivariable function, what fall into algorithmic equations of the analysis formed and connecting processes in furcated electric circuit with semiconductor commutator and reactive element, toward account of the particularities of the use phase and linear voltages to network of the power supply. Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for eleven zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created.

scholarly journals MATHEMATICAL MODEL OF A TWELVE-PULSE CONVERTER WITH SIXTEEN ZONE CONTROL OF THE OUTPUT VOLTAGE AND ACTIVE-INDUCTIVE LOADS

2021 ◽  
Vol 2 (37) ◽  
pp. 68-72
Author(s):  
V. Мihaylenko ◽  
J. Chunyak ◽  
K. Trubitsin ◽  
V. Bachynskiy
Keyword(s):  
Mathematical Model ◽  
Output Voltage ◽  
Electric Circuit ◽  
Variable Structure ◽  
Electric Circuits ◽  
Discrete Parameter ◽  
Electromagnetic Processes ◽  
System Components ◽  
Pulse Regulation ◽  
The Mathematical Model

Analysis of the electromagnetic processes is organized in this article in electric circuit with semiconductor commutator. Mathematical model twelve pulses of the converter is created for analysis of the electromagnetic processes in semiconductor converter with width-pulse regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method multivariable function was used when performing calculation. The mathematical model of the converter is created for five zoned regulations of the output voltage. Using method multivariable function was found current and voltage of the load, as well as input currents of the converter. The load of the converter has actively inductive nature. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.

scholarly journals Analysis of processes in converter with eleven zone regulation output voltage

2020 ◽  
pp. 35-40
Author(s):  
V. Mihaylenko ◽  
J. Chunyak ◽  
V. Bachinskiy
Keyword(s):  
Mathematical Model ◽  
Output Voltage ◽  
Electric Circuit ◽  
Variable Structure ◽  
Modeling And Analysis ◽  
Electric Circuits ◽  
Discrete Parameter ◽  
Electromagnetic Processes ◽  
System Components ◽  
The Mathematical Model

Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator . Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for eleven zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub- system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width- pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.

ANALYSES OF THE ELECTROMAGNETIC PROCESSES IN SEMICONDUCTOR CONVERTER WITH SHESTIZONNYM REGULATION OF THE OUTPUT VOLTAGE

2014 ◽  
pp. 67-73
Author(s):  
В. В. Михайленко ◽  
◽  
В. И. Чибелис ◽  
Ю. М. Чуняк
Keyword(s):  
Output Voltage ◽  
Semiconductor Converter ◽  
Electromagnetic Processes

scholarly journals NECESSITY TO IMPROVE THE MATHEMATICAL MODEL OF FREIGHT CARS TO STUDY CASES OF ITS DERAILMENTS

2020 ◽  
pp. 442-451
Author(s):  
А.V. Batig ◽  
A. Ya. Kuzyshyn
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Computer Experiment ◽  
Rolling Stock ◽  
Software Systems ◽  
Freight Car ◽  
The Stability ◽  
The Many ◽  
The Impact ◽  
The Mathematical Model

One of the most important problems that pose a serious threat to the functioning of railways is the problem of freight cars derailment. However, according to statistics, the number of cases of the derailments of freight cars in trains annually grows. Тo prevent such cases, the necessary preventive measures are developed, and to study the causes of their occurrence, a significant number of mathematical models, programs and software systems created by leading domestic and foreign scientists. Studies of such mathematical models by the authors of this work have led to the conclusion that they are not sufficiently detailed to the extent that it is necessary for analyze the reasons of its derailment. At the same time, an analysis of the causes of the rolling stock derailments on the railways of Ukraine over the past five years showed that in about 20 % of cases they are obvious, and in 7 % of cases they are not obvious and implicitly expressed. The study of such cases of rolling stock derailment during an official investigation by the railway and during forensic railway transport expertises requires the use of an improved mathematical model of a freight car, which would allow a quantitative assessment of the impact of its parameters and rail track on the conditions of railway accidents. Therefore, taking into account the main reasons that caused the occurrence of such railroad accidents over the last five years on the railways of Ukraine, the article selected the main directions for improving the mathematical model of a freight car, allowing to cover all the many factors (explicit and hidden) and identify the most significant ones regarding the circumstances of the derailment rolling stock off the track, established on the basis of a computer experiment. It is proposed in the mathematical model of a freight car to take into account the guiding force, the value of which is one of the main indicators of the stability of the rolling stock. The authors of the article noted that not taking into account the influence of the guiding forces on the dynamics of the freight car can lead to an erroneous determination of the reasons for the rolling stock derailment or even to the impossibility of establishing them.

scholarly journals Analysis on Present Mathematical Model for Predicting the Crop Production

2020 ◽  
Vol 9 (12) ◽  
pp. 168-170
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Real World ◽  
Crop Production ◽  
Ghg Emissions ◽  
Data Set ◽  
Factors Affecting ◽  
The Government ◽  
The Mathematical Model ◽  
Government Website

India is a worldwide agriculture business powerhouse. Future of agriculture-based products depends on the crop production. A mathematical model might be characterized as a lot of equations that speak to the conduct of a framework. By using mathematical model in agriculture field, we can predict the production of crop in particular area. There are various factors affecting crops such as Rainfall, GHG Emissions, Temperature, Urbanization, climate, humidity etc. A mathematical model is a simplified representation of a real-world system. It forms the system using mathematical principles in the form of a condition or a set of conditions. Suppose we need to increase the crop production, at that time the mathematical model plays a major role and our work can be easier, more significant by using the mathematical model. Through the mathematical model we predict the crop production in upcoming years. .AI, ML, IOT play a major role to predict the future of agriculture, but without mathematical models it is not possible to predict crop production accurately. To solve the real-world agriculture problem, mathematical models play a major role for accurate results. Correlation Analysis, Multiple Regression analysis and fuzzy logic simulation standards have been utilized for building a grain production benefit depending model from crop production. Prediction of crop is beneficiary to the farmer to analyze the crop management. By using the present agriculture data set which is available on the government website, we can build a mathematical model.

BASIC MATHEMATICAL MODELS AND AN APPROXIMATE METHOD OF FILTRATION THEORY

2021 ◽  
pp. 25-31
Author(s):  
Alla A. Mussina
Keyword(s):  
Mathematical Model ◽  
Porous Media ◽  
Mathematical Models ◽  
Heterogeneous Porous Media ◽  
Effective Management ◽  
Filtration Theory ◽  
New Device ◽  
Scientific Papers ◽  
The Mathematical Model ◽  
Inhomogeneous Liquids

The article defines the basic concepts of filtration theory and provides an overview of the existing mathematical models of inhomogeneous liquids in porous media. The paper considers the Stefan problem. The number of scientific papers devoted to the study of porous structures has recently increased. This is primarily due to the fact that the prob-lems of oil and uranium production have been identified, and the solution of environmental problems is overdue. Therefore, a new device is needed to develop models of liquid filtration. With the advent and development of computer technology, it has become easier to solve problems that require numerical methods for their solution. Understanding the movement of fluids and the mechanism of dissolution of rocks under the action of acids in heterogeneous porous media is of great importance for the extraction and production of oil and the effective management of these processes. The article examines the mathematical model of the theory of isothermal filtration. Possible variants of the solva-bility of the model are shown. The research scheme consists of the output of a mathematical model, the formulation of the problem, one variant of the solution of the problem, the algorithm of the numerical method of solving the problem.

Mathematical model of the semiconductor converter with twelve-zone regulation of output voltage

2017 ◽  
Author(s):  
V. V. Mykhailenko ◽  
S. O. Buryan ◽  
T. B. Maslova ◽  
L. M. Naumchuk ◽  
J. M. Chunyak ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Output Voltage ◽  
Semiconductor Converter

scholarly journals Diagnostics of supercapacitors

2018 ◽  
Vol 182 ◽  
pp. 01009 ◽  
Author(s):  
Valeriy Martynyuk ◽  
Oleksander Eromenko ◽  
Juliy Boiko ◽  
Tomasz Kałaczyński
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Methodological Approach ◽  
Frequency Dispersion ◽  
Technical Condition ◽  
Transient Processes ◽  
Nonlinear Frequency ◽  
Diagnostic Reliability ◽  
General Reliability ◽  
The Mathematical Model

The paper represents the mathematical model for diagnostics of supercapacitors. The research objectives are the problem of determining a supercapacitor technical condition during its operation. The general reliability of diagnostics is described as the methodological and instrumental reliabilities of diagnostics. The instrumental diagnostic reliability of supercapacitor includes the probabilities of errors of the first and second kind, α and β respectively. The methodological approach to increasing the reliability of supercapacitor diagnostic has been proposed, in terms of multi-parameter supercapacitor diagnostic by applying nonlinear, frequency dependent mathematical models of supercapacitors that take into account nonlinearity, frequency dispersion of parameters and the effect of transient processes in supercapacitors. The more frequencies, operating voltages and currents are applied in the supercapacitor diagnostics, the more methodological reliability of diagnostics will increase in relation to the methodological reliability of supercapacitor diagnostics when only one frequency, voltage and current are applied.

Research on Noise Simulation of Infrared Detector

2012 ◽  
Vol 433-440 ◽  
pp. 4120-4123
Author(s):  
Shu Li Lou ◽  
Yan Li Han ◽  
Jian Cun Ren ◽  
Xiao Hu Yuan ◽  
Xiao Dong Zhou
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Infrared Imaging ◽  
Imaging System ◽  
Infrared Detector ◽  
System Research ◽  
Infrared Imaging System ◽  
Noise Simulation ◽  
And Performance ◽  
The Mathematical Model

Noises of infrared detector have an important influence on sensitivity of infrared imaging system, and it affect the imaging quality and performance of infrared system. Research on noises of infrared detector is a challenging topic in designing, simulating and evaluating of infrared imaging system. All kinds of noises are studied in detail, and mathematical models are built. The method of simulating noises of detector is proposed, and noises are simulated based on the mathematical model.

A study of an elbow mechanism generated by a conical cutter

2007 ◽  
Vol 221 (6) ◽  
pp. 727-738 ◽  
Author(s):  
S-C Yang
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Von Mises Stress ◽  
Tooth Contact Analysis ◽  
Rapid Prototyping And Manufacturing ◽  
Von Mises ◽  
Design And Manufacture ◽  
The Mathematical Model ◽  
Further Development ◽  
Kinematic Errors

This paper presents a method for determining the mathematical model of an elbow mechanism with a convex tooth and a concave tooth. Based on this method, the mathematical model presents the meshing principles of a conical cutter meshed with a tooth that is either convex or concave. Using the developed mathematical models and the tooth contact analysis, kinematic errors are investigated according to the obtained geometric modelling of the designed gear meshing when assembly errors are present. The influence of misalignment on kinematic errors has been investigated. The goal of the current study is to investigate von-Mises stress for three teeth contact pairs. A structural load is assumed to act on a gear of the proposed mechanism. The von-Mises of the proposed gear is determined. The conical cutter used in the design and manufacture of the convex and concave gear is shown. For example, the proposed mechanism with a transmission ratio of 3:2 was determined with the aid of the proposed mathematical model. Using rapid prototyping and manufacturing technology, an elbow mechanism with a convex gear, a concave gear and a frame was designed. The RP primitives provide an actual full-size physical model that can be analysed and used for further development. Results from these mathematical models are applicable to the design of an elbow mechanism.

Sign in / Sign up

Export Citation Format

Share Document