scholarly journals To Solution of Contact Problem for Rectangular Plate on Elastic Half-Space

2020 ◽  
Vol 19 (3) ◽  
pp. 224-229
Author(s):  
S. V. Bosakov

Until the present time there is no exact solution to the contact problem for a rectangular plate on an elastic base with distribution properties. Practical analogues of this design are slab foundations widely used in construction. A lot of scientists have solved this problem in various ways. The methods of finite differences, B. N. Zhemochkin and power series do not distinguish a specific feature in contact stresses at the edges of the plate. The author of the paper has obtained an expansion of the Boussinesq solution for determining displacements of the elastic half-space surface in the form of a double series according to the Chebyshev polynomials of the first kind in a rectangular region. For the first time, such a representation for the symmetric part of the Boussinesq solution was obtained by V. I. Seimov and it has been applied to study symmetric vibrations of a rectangular stamp, taking into account inertial properties of the half-space. Using this expansion, the author gives a solution to the problem for a rectangular plate lying on an elastic half-space under the action of an arbitrarily applied concentrated force. In this case, the required displacements are specified in the form of a double row in the Chebyshev polynomials of the first kind. Contact stresses are also specified in the form of a double row according to the Chebyshev polynomials of the first kind with weight. In the integral equation of the contact problem integration over a rectangular region is performed while taking into account the orthogonality of the Chebyshev polynomials. In the resulting expression the coefficients are equal for the same products of the Chebyshev polynomials. The result is an infinite system of linear algebraic equations, which is solved by the amplification method. Thus the sought coefficients are found in the expansion for contact stresses.

2018 ◽  
Vol 17 (6) ◽  
pp. 458-464
Author(s):  
S. V. Bosakov

The paper presents solutions of two contact problems for the annular plate die on an elastic half-space under the action of axisymmetrically applied force and moment. Such problems usually arise in the calculation of rigid foundations with the sole of the annular shape in chimneys, cooling towers, water towers and other high-rise buildings on the wind load and the load from its own weight. Both problems are formulated in the form of triple integral equations, which are reduced to one integral equation by the method of substitution. In the case of the axisymmetric problem, the kernel of the integral equation depends on the product of three Bessel functions. Using the formula to represent two Bessel functions in the form of a double row on the works of hypergeometric functions Bessel function, the problem reduces to a functional equation that connects the movement of the stamp with the unknown coefficients of the distribution of contact stresses. The resulting functional equation is reduced to an infinite system of linear algebraic equations, which is solved by truncation. Under the action of a moment on the annular plate  die, the distribution of contact stresses is searched as a series by the products of the Legendre attached functions with a weight corresponding to the features in the contact stresses at the die edges. Using the spectral G. Ya. Popov ratio for the ring plate, the problem is again reduced to an infinite system of linear algebraic equations, which is also solved by the truncation method. Two examples of calculations for an annular plate die on an elastic half-space on the action of axisymmetrically applied force and moment are given. A comparison of the results of calculations on the proposed approach with the results for the round stamp and for the annular  stamp with the solutions of other authors is made.


1982 ◽  
Vol 104 (3) ◽  
pp. 347-351 ◽  
Author(s):  
L. M. Keer ◽  
M. D. Bryant ◽  
G. K. Haritos

Numerical results are presented for a cracked elastic half-space surface-loaded by Hertzian contact stresses. A horizontal subsurface crack and a surface breaking vertical crack are contained within the half-space. An attempt to correlate crack geometry to fracture is made and possible mechanisms for crack propagation are introduced.


1992 ◽  
Vol 114 (2) ◽  
pp. 253-261 ◽  
Author(s):  
C. H. Kuo ◽  
L. M. Keer

The three-dimensional problem of contact between a spherical indenter and a multi-layered structure bonded to an elastic half-space is investigated. The layers and half-space are assumed to be composed of transversely isotropic materials. By the use of Hankel transforms, the mixed boundary value problem is reduced to an integral equation, which is solved numerically to determine the contact stresses and contact region. The interior displacement and stress fields in both the layer and half-space can be calculated from the inverse Hankel transform used with the solved contact stresses prescribed over the contact region. The stress components, which may be related to the contact failure of coatings, are discussed for various coating thicknesses.


Sign in / Sign up

Export Citation Format

Share Document