Contact Stress Analysis of a Layered Transversely Isotropic Half-Space

1992 ◽  
Vol 114 (2) ◽  
pp. 253-261 ◽  
Author(s):  
C. H. Kuo ◽  
L. M. Keer
Keyword(s):  
Half Space ◽  
Mixed Boundary ◽  
Contact Region ◽  
Three Dimensional ◽  
Transversely Isotropic ◽  
Hankel Transform ◽  
Elastic Half Space ◽  
Contact Stresses ◽  
Stress Components ◽  
Contact Failure

The three-dimensional problem of contact between a spherical indenter and a multi-layered structure bonded to an elastic half-space is investigated. The layers and half-space are assumed to be composed of transversely isotropic materials. By the use of Hankel transforms, the mixed boundary value problem is reduced to an integral equation, which is solved numerically to determine the contact stresses and contact region. The interior displacement and stress fields in both the layer and half-space can be calculated from the inverse Hankel transform used with the solved contact stresses prescribed over the contact region. The stress components, which may be related to the contact failure of coatings, are discussed for various coating thicknesses.

Transient fundamental solutions for a transversely isotropic elastic half space

1993 ◽  
Vol 442 (1916) ◽  
pp. 505-531 ◽  
Keyword(s):  
Half Space ◽  
Transient Response ◽  
Analytical Solutions ◽  
Three Dimensional ◽  
Transversely Isotropic ◽  
Integral Transforms ◽  
Fundamental Solutions ◽  
Elastic Half Space ◽  
Kernel Functions ◽  
Two Dimensional

This paper is concerned with the study of transient response of a transversely isotropic elastic half-space under internal loadings and displacement discontinuities. Governing equations corresponding to two-dimensional and three-dimensional transient wave propagation problems are solved by using Laplace–Fourier integral transforms and Laplace−Hankel integral transforms, respectively. Explicit general solutions for displacements and stresses are presented. Thereafter boundary-value problems corresponding to internal transient loadings and transient displacement discontinuities are solved for both two-dimensional and three-dimensional problems. Explicit analytical solutions for displacements and stresses corresponding to internal loadings and displacement discontinuities are presented. Solutions corresponding to arbitrary loadings and displacement discontinuities can be obtained through the application of standard analytical procedures such as integration and Fourier expansion to the fundamental solutions presented in this article. It is shown that the transient response of a medium can be accurately computed by using a combination of numerical quadrature and a numerical Laplace inversion technique for the evaluation of integrals appearing in the analytical solutions. Comparisons with existing transient solutions for isotropic materials are presented to confirm the accuracy of the present solutions. Selected numerical results for displacements and stresses due to a buried circular patch load are presented to portray some features of the response of a transversely isotropic elastic half-space. The fundamental solutions presented in this paper can be used in the analysis of a variety of transient problems encountered in disciplines such as seismology, earthquake engineering, etc. In addition these fundamental solutions appear as the kernel functions in the boundary integral equation method and in the displacement discontinuity method.

Interaction between a Rigid Cylinder with a Piezoelectric Half-Space with Partial Adhesion

2008 ◽  
Vol 33-37 ◽  
pp. 333-338 ◽  
Author(s):  
Zuo Rong Chen ◽  
Shou Wen Yu
Keyword(s):  
Integral Equations ◽  
Half Space ◽  
Integral Transform ◽  
Mixed Boundary ◽  
Piezoelectric Materials ◽  
Contact Region ◽  
Electric Displacement ◽  
Transversely Isotropic ◽  
Dual Integral Equations ◽  
Slip Region

An axisymmetric problem of interaction of a rigid rotating flat ended punch with a transversely isotropic linear piezoelectric half-space is considered. The contact zone consists of an inner circular adhesion region surrounded by an outer annular slip region with Coulomb friction. Beyond the contact region, the surface of the piezoelectric half-space is free from load. With the aid of the Hankel integral transform, this mixed boundary value problem is formulated as a system of dual integral equations. By solving the dual integral equations, analytical expressions for the tangential stress and displacement, and normal electric displacement on the surface of the piezoelectric half-space are obtained. An explicit relationship between the radius of the adhesion region, the angle of the rotation of the punch, material parameters, and the applied loads is presented. The obtained results are useful for characterization of piezoelectric materials by micro-indentation and micro-friction techniques.

Vertical Action of a Concentric Multi-Annular Punch on a Transversely Isotropic Elastic Half-Space

2012 ◽  
Vol 79 (4) ◽  
Author(s):  
Morteza Eskandari-Ghadi ◽  
Ronald Y. S. Pak ◽  
Azizollah Ardeshir-Behrestaghi
Keyword(s):  
Half Space ◽  
Mixed Boundary ◽  
Transversely Isotropic ◽  
Elastic Half Space ◽  
Computational Approach ◽  
Mixed Boundary Value Problem ◽  
Contact Conditions ◽  
Degree Of Anisotropy ◽  
Annular Punch ◽  
Vertical Action

In this paper, the response of a transversely isotropic half-space under the punch action of a set of rigid concentric annuli frictionless contacts is considered. By virtue of a compact potential representation and Hankel transforms, a set of ring-load Green’s functions for the axisymmetric equations of equilibrium are derived and shown to be expressible in terms of standard elliptic integrals. With the aid of a rigorous yet highly efficient numerical method, the integral equation is solved for the multi-interval singular mixed boundary value problem. Detailed solutions to illustrate the performance of the computational approach and the influence of the degree of anisotropy and contact conditions on the mechanics problem are presented.

Asymmetric Problem of Loading Under a Smooth Punch

1985 ◽  
Vol 52 (3) ◽  
pp. 681-685 ◽  
Author(s):  
V. I. Fabrikant ◽  
A. P. S. Selvadurai ◽  
G. D. Xistris
Keyword(s):  
Half Space ◽  
Three Dimensional ◽  
Arbitrary Point ◽  
Transversely Isotropic ◽  
Elastic Half Space ◽  
Space Region ◽  
Rigid Punch ◽  
Concentrated Force ◽  
Asymmetric Problem ◽  
Elastostatic Problem

This paper examines the three-dimensional elastostatic problem related to the interaction between a smoothly indenting rigid circular punch on a transversely isotropic elastic half-space and an internal concentrated force. The localized force acts at an arbitrary point within the half-space region. The analysis of the problem focuses on the evaluation of the resultant displacement and rotation experienced by the rigid punch.

Guided Surface Waves on an Elastic Half Space

1971 ◽  
Vol 38 (4) ◽  
pp. 899-905 ◽  
Author(s):  
L. B. Freund
Keyword(s):  
Wave Propagation ◽  
Surface Wave ◽  
Surface Waves ◽  
Half Space ◽  
Body Wave ◽  
Three Dimensional ◽  
Elastic Half Space ◽  
Normal Displacement ◽  
Rigid Barrier ◽  
Wave Disturbances

Three-dimensional wave propagation in an elastic half space is considered. The half space is traction free on half its boundary, while the remaining part of the boundary is free of shear traction and is constrained against normal displacement by a smooth, rigid barrier. A time-harmonic surface wave, traveling on the traction free part of the surface, is obliquely incident on the edge of the barrier. The amplitude and the phase of the resulting reflected surface wave are determined by means of Laplace transform methods and the Wiener-Hopf technique. Wave propagation in an elastic half space in contact with two rigid, smooth barriers is then considered. The barriers are arranged so that a strip on the surface of uniform width is traction free, which forms a wave guide for surface waves. Results of the surface wave reflection problem are then used to geometrically construct dispersion relations for the propagation of unattenuated guided surface waves in the guiding structure. The rate of decay of body wave disturbances, localized near the edges of the guide, is discussed.

Indentation of a Transversely Isotropic Thermoporoelastic Half-Space by a Rigid Circular Cylindrical Punch

2017 ◽  
Vol 84 (11) ◽  
Author(s):  
Yilan Huang ◽  
Guozhan Xia ◽  
Weiqiu Chen ◽  
Xiangyu Li
Keyword(s):  
Half Space ◽  
Original Problem ◽  
Three Dimensional ◽  
Transversely Isotropic ◽  
The Finite Element Method ◽  
Thermal Fields ◽  
Cylindrical Punch ◽  
The One ◽  
Physical Quantities ◽  
Potential Theory Method

Exact solutions to the three-dimensional (3D) contact problem of a rigid flat-ended circular cylindrical indenter punching onto a transversely isotropic thermoporoelastic half-space are presented. The couplings among the elastic, hydrostatic, and thermal fields are considered, and two different sets of boundary conditions are formulated for two different cases. We use a concise general solution to represent all the field variables in terms of potential functions and transform the original problem to the one that is mathematically expressed by integral (or integro-differential) equations. The potential theory method is extended and applied to exactly solve these integral equations. As a consequence, all the physical quantities of the coupling fields are derived analytically. To validate the analytical solutions, we also simulate the contact behavior by using the finite element method (FEM). An excellent agreement between the analytical predictions and the numerical simulations is obtained. Further attention is also paid to the discussion on the obtained results. The present solutions can be used as a theoretical reference when practically applying microscale image formation techniques such as thermal scanning probe microscopy (SPM) and electrochemical strain microscopy (ESM).

Multiple Region Contact Solutions for a Flat Indenter on a Layered Elastic Half Space: Plane-Strain Case

1989 ◽  
Vol 56 (2) ◽  
pp. 251-262 ◽  
Author(s):  
T. W. Shield ◽  
D. B. Bogy
Keyword(s):  
Plane Strain ◽  
Half Space ◽  
Contact Region ◽  
Integral Transforms ◽  
Elastic Half Space ◽  
Geometrical Parameters ◽  
Restricted Range ◽  
Complete Contact ◽  
The One ◽  
Layered Half Space

The plane-strain problem of a smooth, flat rigid indenter contacting a layered elastic half space is examined. It is mathematically formulated using integral transforms to derive a singular integral equation for the contact pressure, which is solved by expansion in orthogonal polynomials. The solution predicts complete contact between the indenter and the surface of the layered half space only for a restricted range of the material and geometrical parameters. Outside of this range, solutions exist with two or three contact regions. The parameter space divisions between the one, two, or three contact region solutions depend on the material and geometrical parameters and they are found for both the one and two layer cases. As the modulus of the substrate decreases to zero, the two contact region solution predicts the expected result that contact occurs only at the corners of the indenter. The three contact region solution provides an explanation for the nonuniform approach to the half space solution as the layer thickness vanishes.

Subsurface and Surface Cracking Due to Hertzian Contact

1982 ◽  
Vol 104 (3) ◽  
pp. 347-351 ◽  
Author(s):  
L. M. Keer ◽  
M. D. Bryant ◽  
G. K. Haritos
Keyword(s):  
Crack Propagation ◽  
Half Space ◽  
Elastic Half Space ◽  
Contact Stresses ◽  
Numerical Results ◽  
Hertzian Contact ◽  
Vertical Crack ◽  
Subsurface Crack ◽  
Surface Cracking ◽  
Crack Geometry

Numerical results are presented for a cracked elastic half-space surface-loaded by Hertzian contact stresses. A horizontal subsurface crack and a surface breaking vertical crack are contained within the half-space. An attempt to correlate crack geometry to fracture is made and possible mechanisms for crack propagation are introduced.

Sign in / Sign up

Export Citation Format

Share Document