High-Fluid-Loss, High-Strength Lost Circulation Treatments

Drilling of oil and gas wells is a time consuming, very complex process in which there occur all sorts of complications. The most common one is drilling mud loss. During drilling of wells the control of this fluid loss problem takes about 12 % of total time. In this case, up to 60 % of materials and time is spent on isolation of fractured-cavernous beds with high fluid loss intensity which make up only 10 % of the total number of isolated zones. The use of liners with welded and threaded connections of shaped tubes enabled to completely solve the problem of lost circulation zones isolation regardless of their thickness, the borehole caving and the fluid loss intensity.

Download Full-text

Reticulated Foam Enhanced High Fluid Loss Squeeze LCM for Severe Lost Circulation Management in Highly Fractured Formations

10.2118/180306-ms ◽

2016 ◽

Cited By ~ 4

Author(s):

Sharath Savari ◽

Jonathan Rolfson ◽

Robert Williams ◽

Donald L. Whitfill ◽

Hong Max Wang

Keyword(s):

Fluid Loss ◽

Lost Circulation ◽

High Fluid

Download Full-text

Lost Circulation Material Implementation Strategies on Fluid Loss Remediation and Formation Damage Control

10.2118/199249-ms ◽

2020 ◽

Author(s):

Mingzheng Yang ◽

Yuanhang Chen

Keyword(s):

Damage Control ◽

Implementation Strategies ◽

Formation Damage ◽

Fluid Loss ◽

Lost Circulation ◽

Formation Damage Control

Download Full-text

Assessment of Lost Circulation Material Particle-Size Distribution on Fracture Sealing: A Numerical Study

SPE Drilling & Completion ◽

10.2118/209201-pa ◽

2022 ◽

pp. 1-15

Author(s):

Lu Lee ◽

Arash Dahi Taleghani

Keyword(s):

Particle Size ◽

Particle Size Distribution ◽

Size Distribution ◽

Numerical Study ◽

Fluid Loss ◽

Material Particle ◽

Lost Circulation ◽

Fracture Sealing ◽

Discrete Element Methods ◽

Lost Circulation Materials

Summary Lost circulation materials (LCMs) are essential to combat fluid loss while drilling and may put the whole operation at risk if a proper LCM design is not used. The focus of this research is understanding the function of LCMs in sealing fractures to reduce fluid loss. One important consideration in the success of fracture sealing is the particle-size distribution (PSD) of LCMs. Various studies have suggested different guidelines for obtaining the best size distribution of LCMs for effective fracture sealing based on limited laboratory experiments or field observations. Hence, there is a need for sophisticated numerical methods to improve the LCM design by providing some predictive capabilities. In this study, computational fluid dynamics (CFD) and discrete element methods (DEM) numerical simulations are coupled to investigate the influence of PSD of granular LCMs on fracture sealing. Dimensionless variables were introduced to compare cases with different PSDs. We validated the CFD-DEM model in reproducing specific laboratory observations of fracture-sealing experiments within the model boundary parameters. Our simulations suggested that a bimodally distributed blend would be the most effective design in comparison to other PSDs tested here.

Download Full-text

Synthesis and performance of a self crosslinkable acrylate copolymer with high compatibility for an oil well cement modifier

Journal of Polymer Engineering ◽

10.1515/polyeng-2013-0303 ◽

2014 ◽

Vol 34 (5) ◽

pp. 405-413

Author(s):

Xianru He ◽

Qian Chen ◽

Chunhui Feng ◽

Liang Wang ◽

Hailong Hou

Keyword(s):

High Performance ◽

Oil And Gas ◽

High Strength ◽

Ammonium Persulfate ◽

Fluid Loss ◽

Oil Well ◽

Cement Slurry ◽

Oil Well Cement ◽

Well Cement ◽

Loss Control

Abstract High performance cement slurry polymer modifiers are increasingly in demand in the cementing process of oil and gas. A new polymer modifier with outstanding fluid loss control and high strength and toughness was synthesized by the main monomers butyl acrylate (BA), methyl methacrylate (MMA), acrylamide (AM), the functional monomers vinyltriethoxysilane (VTS), glycidyl methacrylate (GMA) and the initiator of ammonium persulfate (APS) through emulsion polymerization. By using Fourier transform infrared (FTIR) spectrometer, a laser particle analyzer, a scanning electron microscope and a differential scanning calorimeter, we studied the mechanism of fluid loss control and microstructure of polymer latex cement slurries. The experimental results showed that the copolymer could be crosslinked at 160°C and have the lowest fluid loss control, 12 ml, when the polymer content reached 5%. Acrylate latex modified by the silane coupling agent VTS had excellent performance on fluid loss control, as well as mechanical properties for oil well cement. These results have a potential significant value for the development of a new polymer cement modifier with high thermal stability and durability.

Download Full-text

An Experimental Investigation of Filtercake Reinforced Wellbore Strengthening and Fracture Sealing

Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology ◽

10.1115/omae2019-96675 ◽

2019 ◽

Author(s):

Mingzheng Yang ◽

Yuanhang Chen ◽

Frederick B. Growcock ◽

Feifei Zhang

Keyword(s):

Experimental Investigation ◽

Critical Role ◽

Fracture Initiation ◽

Fluid Loss ◽

Lost Circulation ◽

Fracture Sealing ◽

Sealing Pressure ◽

Wellbore Strengthening ◽

Mud Loss ◽

Lost Circulation Materials

Abstract Drilling-induced lost circulation should be managed before and during fracture initiation rather than after they propagate to form large fractures and losses become uncontrollable. Recent studies indicated the potentially critical role of filtercake in strengthening the wellbore through formation of a pressure-isolating barrier, as well as plugging microfractures during fracture initiation. In this study, an experimental investigation was conducted to understand the role played by filtercake in the presence of lost circulation materials (LCMs). A modified permeability plugging apparatus (PPA) with slotted discs was used to simulate whole mud loss through fractures of known width behind filtercake. Cumulative fluid loss upon achieving a complete seal and the maximum sealing pressure were measured to evaluate the combined effects of filtercake and LCMs in preventing and reducing fluid losses. The effects of some filtercake properties (along with LCM type, concentration and particle size distribution) on filtercake rupture and fracture sealing were investigated. The results indicate that filtercake can accelerate fracture sealing and reduce total mud loss. Efficiently depositing filtercake while drilling can reduce the concentration of LCM that is required to plug and isolate incipient fractures.

Download Full-text

High-Strength, High-Stability Pill System to Prevent Lost Circulation

10.2523/iptc-17127-ms ◽

2013 ◽

Cited By ~ 1

Author(s):

Cheng-yuan Xu ◽

Yi-li Kang ◽

Li-jun You ◽

Song Li ◽

Fei Chen

Keyword(s):

High Stability ◽

High Strength ◽

Lost Circulation

Download Full-text

Modeling Lost-Circulation into Fractured Formation in Rock Drilling Operations

10.5772/intechopen.95805 ◽

2021 ◽

Author(s):

Rami Albattat ◽

Hussein Hoteit

Keyword(s):

Analytical Modeling ◽

Drilling Fluid ◽

Fluid Loss ◽

Fracture Conductivity ◽

Type Curves ◽

Bingham Plastic ◽

Lost Circulation ◽

Rock Formations ◽

Solution Methods ◽

Drilling Operations

Loss of circulation while drilling is a challenging problem that may interrupt drilling operations, reduce efficiency, and increases cost. When a drilled borehole intercepts conductive faults or fractures, lost circulation manifests as a partial or total escape of drilling, workover, or cementing fluids into the surrounding rock formations. Studying drilling fluid loss into a fractured system has been investigated using laboratory experiments, analytical modeling, and numerical simulations. Analytical modeling of fluid flow is a tool that can be quickly deployed to assess lost circulation and perform diagnostics, including leakage rate decline and fracture conductivity. In this chapter, various analytical methods developed to model the flow of non-Newtonian drilling fluid in a fractured medium are discussed. The solution methods are applicable for yield-power-law, including shear-thinning, shear-thickening, and Bingham plastic fluids. Numerical solutions of the Cauchy equation are used to verify the analytical solutions. Type-curves are also described using dimensionless groups. The solution methods are used to estimate the range of fracture conductivity and time-dependent fluid loss rate, and the ultimate total volume of lost fluid. The applicability of the proposed models is demonstrated for several field cases encountering lost circulations.

Download Full-text