Abstract
Friction reducer evaluations for field application selection are conducted in laboratory benchtop recirculating flow loops or once-through systems. Industry standard procedures and benchtop flow loop (loop) system specifications for friction reduction assessment are nonexistent, though standardization efforts are recently documented. Research and papers correlating friction reducer performance to brine and additives have been published, however other key variables can significantly affect performance and therefore must be addressed to maximize product recommendation accuracy. This paper illustrates how variances affect results.
Benchtop recirculating loops used for testing friction reduction products for a specific field's application vary significantly in system components, configurations, and test analyses. Crucial loop system variance examples include differing pipe diameters, pump configurations, flow meter types and placement, differential pressure section and full run lengths, reservoir designs, mixing conditions, and end performance calculations. Oil and gas producers and service companies are trending towards outsourcing friction reducers to independent testing laboratories for loop assessment results prior to recommending friction reducers for end use field applications. These recommendations may have inherent selection bias depending upon the loop system's components and configuration. Friction reduction calculations during loop testing do not consistently consider changes in viscosity and temperature, thereby altering absolute results when evaluating performance. To apply the simplified assumptions in standard pressure, drop methodology, equivalency in flow rate, density, viscosity, and temperature within the run must be maintained. Performance of the friction reducer in a specific brine and additive test run should primarily be dependent upon dosage and method of injecting friction reducer into the loop, however other variables can contribute to performance results. We presume equivalency in pipe roughness and proper loop cleansing.
The effects of these variables on friction reduction response applying wide-ranging factors of flowrate, density, viscosity, and temperature are evaluated using designed experiments with responses plotted and illustrated in Cartesian and contour graphs. The result of these designed experiments identified that certain variables are more influential on friction reducers’ measured performances in standard loop experiments and require observation and documentation during performance testing. The final study in this work generated vastly different performance curves when all of the aspects of loop design, entry and differential run lengths, flow rate, injection method, friction reducer types and loadings, and brine types, densities, viscosities, and temperatures were held constant.
The goal of benchtop loop testing is scaling for actual field applications. Scaling discrepancies persist however due to differing pipe diameters, fluid circuit designs, and pump types and rates combined with changing brine compositions, proppant, and chemical additive effects on friction reducer products. Understanding that different benchtop loops, or potentially the same benchtop loop, will generate differing results is intriguing, yet unsettling.
