Conceptual Field Development Plan for X Field

2021 ◽  
Author(s):  
Khadijah Ibrahim ◽  
Petrus Nzerem ◽  
Ayuba Salihu ◽  
Ikechukwu Okafor ◽  
Oluwaseun Alonge ◽  
...  
Keyword(s):  
Capital Expenditure ◽  
Probabilistic Approach ◽  
Cost Effective ◽  
Oil Field ◽  
Development Plan ◽  
Recovery Factor ◽  
Reservoir Rock ◽  
Production Forecast ◽  
Field Development ◽  
Water Cut

Abstract The development plan of the new oil field discovered in a remote offshore environment, Niger Delta, Nigeria was evaluated. As the oil in place is uncertain, a probabilistic approach was used to estimate the STOOIP using the low, mid, and high cases. The STOOIP for these cases were 95 MMSTB, 145 MMSTB and 300 MMSTB which are the potential amount of oil in the reservoir. Rock and fluid properties were determined using PVT sample and then matched to the Standing correlations with an RMS of 4.93%. The performance of the different well models were analyzed, and sensitivities were run to provide detailed information to reduce the uncertainties of the parameters. Furthermore, production forecast was done for the field for the different STOOIP using the predicted number of producer and injector wells. The timing of the wells was accurately allocated to provide information for the drillers to work on the wells. From the production forecast, the different STOOIP cases had a water cut ranging from 68-73% at the end of the 15-year field life. The recoverable oil estimate was accounted for 33.25 MMSTB for 95 MMSTB (low), 55.1 MMSTB for 145 MMSTB (mid) and 135 MMSTB for 300 MMSTB (high) at 35%, 38% and 45% recovery factor. Based on the proposed development plan, the base model is recommended for further implementation as the recovery factor is 38% with an estimate of 55.1 MMSTB. The platform will have 6 producers and 2 injectors. The quantity of oil produced is estimated at 15000 stbo/day which will require a separator that has the capacity of hold a liquid rate of about 20000 stb/day. The developmental wells are subsequently increased to achieve a water cut of 90-95% with more recoverable oil within the 15-year field life. This developmental plan is also cost effective as drilling more wells means more capital expenditure.

Research on the Law of Liquid Production Index of Bohai Typical Oilfield Based on Big Data

2021 ◽  
Author(s):  
Baolin Yue ◽  
Bin Liu ◽  
Hongfu Shi ◽  
Fei Shi ◽  
Wei Zhang
Keyword(s):  
Big Data ◽  
Bohai Sea ◽  
Oil Field ◽  
Oil Reservoir ◽  
Production Forecast ◽  
Production Index ◽  
Field Development ◽  
Full Life Cycle ◽  
Water Cut ◽  
Oilfield Development

Abstract The prediction of reservoir fluid production law play a key role in offshore oil field development plan design. It determines the parameter selection of pump displacement, oilfield submarine pipe capacity, platform fluid handling capacity, power generation equipment, etc. If the liquid production forecast is too low, the capacity will be expanded later, while if the forecast is too high, it will result in a waste of investment, which directly affects the fixed investment in oilfield development. Based on the statistical analysis of big data, this paper applies the dynamic data of all single wells and full life cycle of the oil field to analyze the dimensionless liquid production index (DLPI) law, and further establish the liquid production index prediction formula on this basis. Thus, the different types of Bohai plate and statistical table of the characteristics of the DLPI of the reservoir are completed. The results show that the DLPI of Bohai Sea heavy oil reservoir are following: water cut < 60 % indicates the trend is flat; water cut between 60 ∼ 80 % illustrates the slow growth (water cut 80 % is 2.5∼3 times); water cut > 80 % shows rapid growth (water cut 95% is 5.5∼6 times). The DLPI of Bohai Sea conventional oil reservoir are as following: when the water cut < 60%, the DLPI drops first, and then increase when the water cut is about 30% (the lowest point (0.7∼0.9 times)). When the water cut rise to 60%, the DLPI returns to 1 times; When the water cut is 60∼80%, it grows slowly (1.5∼2 times); when the water cut > 80 %, it grows rapidly (water cut 95% is 2∼3 times). The study may provide a guidance to the prediction of the amount of fluid in offshore oilfields, provide a basis for the design of new oilfield development schemes and increasing the production of old oilfields.

Low-Cost Development Plan Optimization for a Polish Oil Field

2021 ◽  
Author(s):  
Daniel Podsobinski ◽  
Roman Madatov ◽  
Bartlomiej Kawecki ◽  
Grzegorz Paliborek ◽  
Piotr Wójcik ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Capital Expenditure ◽  
Oil Production ◽  
Oil Field ◽  
Oil Fields ◽  
Development Plan ◽  
Recovery Factor ◽  
Co2 Injection ◽  
Development Scenarios ◽  
Injection Water

Abstract In Poland there are approximately 60 oil fields located in different geological structures. Most of these fields have been producing for several years to several dozen years, and now require redefining of the development plan by utilizing an improved oil recovery (IOR) or enhanced oil recovery (EOR) method to achieve a higher oil recovery factor. Here we present the redevelopment plan for the Polish Main Dolomite oil field, that aimed to optimize and maximize the oil recovery factor. Considering all available geological and reservoir data, both a static and dynamic model were built and calibrated for three separate reservoirs connected to the same production facility. Then the comprehensive study was performed where different development scenarios was considered and tested using reservoir numerical simulation. The proposed redevelopment scenarios included excessive gas reinjection to the main reservoir, additional high-nitrogen (N2) gas injection from a nearby gas reservoir (87% of N2), carbon dioxide (CO2) injection, water injection, polymer injection, water-alternating-gas (WAG), well stimulation, and a combination of these methods. Development plans assumes also drilling new injection and production wells and converting existing producers to gas or water injectors. The key component in development scenarios was to arrest the pressure decline from the main field and decrease the gas/oil ratio (GOR). An additional challenge was to implement in the simulation model all key assumptions behind various development scenarios, while also taking into account specific facility constraints and simultaneously handling separate reservoirs that are connected to the same facility, and hence affecting each other. From numerous scenarios, the scenario that requires the least number of new wells was selected and further optimized. It considers the drilling of only one new producer, one new water injector, and conversion of some currently producing wells to gas and water injectors. The location of the proposed well and the amount of injection fluids was optimized to achieve the highest oil recovery factor and to postpone gas and water breakthrough as much as possible. The optimized case that assumes low investments is expected to improve incremental oil production by 90% over No Further Actions Scenario. However, the study suggests the potential of more than tripling incremental oil production under a scenario with considerably higher expenditures. The improved case assumes drilling one more producer, four new water injectors, and injection of three times more water. The presented field optimization example highlights that in many existing Polish oil fields there is still a potential to reach higher oil recovery without considerable expenditures. However, to obtain more significant oil recovery improvement, higher capital expenditure is necessary. To facilitate the selection of the best development scenario, a detailed economic and risk analysis needs to be conducted.

Oil Reserves Evaluation and Field Development plan of Hakim Oil Field in Libya

2016 ◽  
Vol 18 (1) ◽  
pp. 39-53
Author(s):  
Omar Salih ◽  
Mahmoud Tantawy ◽  
Sayed Elayouty ◽  
Atef Abd Hady
Keyword(s):  
Oil Field ◽  
Development Plan ◽  
Field Development ◽  
Oil Reserves

scholarly journals A practical method for planning large number of horizontal wells with a reservoir model for a field development plan

2021 ◽  
Vol 10 ◽  
pp. 17-32
Author(s):  
Guido Fava ◽  
Việt Anh Đinh
Keyword(s):  
Horizontal Well ◽  
Horizontal Wells ◽  
Simulation Software ◽  
Production Performance ◽  
Development Plan ◽  
Regular Pattern ◽  
Production Forecast ◽  
Advanced Technique ◽  
Large Reservoir ◽  
Field Development

The most advanced technique to evaluate different solutions proposed for a field development plan consists of building a numerical model to simulate the production performance of each alternative. Fields covering hundreds of square kilometres frequently require a large number of wells. There are studies and software concerning optimal planning of vertical wells for the development of a field. However, only few studies cover planning of a large number of horizontal wells seeking full population on a regular pattern. One of the criteria for horizontal well planning is selecting the well positions that have the best reservoir properties and certain standoffs from oil/water contact. The wells are then ranked according to their performances. Other criteria include the geometry and spacing of the wells. Placing hundreds of well individually according to these criteria is highly time consuming and can become impossible under time restraints. A method for planning a large number of horizontal wells in a regular pattern in a simulation model significantly reduces the time required for a reservoir production forecast using simulation software. The proposed method is implemented by a computer script and takes into account not only the aforementioned criteria, but also new well requirements concerning existing wells, development area boundaries, and reservoir geological structure features. Some of the conclusions drawn from a study on this method are (1) the new method saves a significant amount of working hours and avoids human errors, especially when many development scenarios need to be considered; (2) a large reservoir with hundreds of wells may have infinite possible solutions, and this approach has the aim of giving the most significant one; and (3) a horizontal well planning module would be a useful tool for commercial simulation software to ease engineers' tasks.

Bati Raman Field Immiscible CO2 Application--Status Quo and Future Plans

2008 ◽  
Vol 11 (04) ◽  
pp. 778-791 ◽  
Author(s):  
Secaeddin Sahin ◽  
Ulker Kalfa ◽  
Demet Celebioglu
Keyword(s):  
Gas Injection ◽  
Critical Evaluation ◽  
Oil Field ◽  
Recovery Factor ◽  
Reservoir Rock ◽  
Current Status ◽  
Co2 Injection ◽  
Status Report ◽  
Random Pattern ◽  
Short Period

Summary The Bati Raman field is the largest oil field in Turkey and contains approximately 1.85 billion bbl of oil initially in place. The oil is heavy (12°API), with high viscosity and low solution-gas content. Primary recovery was less than 2% of oil originally in place (OOIP). Over the period of primary recovery (1961-86), the reservoir underwent extensive pressure depletion from 1,800 psig to as low as 400 psig in some regions, resulting in a production decline from 9,000 to 1,600 STB/D. In March 1986, a carbon-dioxide (CO2) -injection pilot in a 1,200-acre area containing 33 wells was initiated in the western portion of the field. The gas-injection was initially cyclic. In 1988, the gas injection scheme was converted to a CO2-flood process. Later, the process was extended to cover the whole field. A peak daily production rate of 13,000 STB/D was achieved, whereas rate would have been less than 1,600 STB/D without CO2 application. However, the field has undergone a progressive production decline since 1995to recent levels of approximately 5,500 STB/D. Polymer-gel treatments were carried out to increase the CO2 sweep efficiency. Multilateral- and horizontal-well technology also was applied on a pilot scale to reach the bypassed oil. A water-alternating-gas (WAG) application has been applied extensively in the western part of the field. Current production is 7,000 STB/D. This paper documents more than 25 years of experience of the Turkish Petroleum Corporation (TPAO) on the design and operation of this full-field immiscible CO2-injection project conducted in the Bati Raman oil field in Turkey. The objective is to update the current status report, update the reservoir/field problems that TPAO has encountered (unpredictable problems and results), and provide a critical evaluation of the success of the project. Introduction The Bati Raman field is the biggest oil accumulation in Turkey and is operated by TPAO. It contains very viscous and low-API-gravity oil in a very challenging geological environment. Because of the fact that the recovery factor by primary recovery was limited, several enhanced-oil-recovery (EOR) techniques had been proposed and tested at the pilot level in the 1970s and 1980s. On the basis of the success of the laboratory tests and the vast amount of CO2 available in a neighboring field, which is only 55 miles away from the Bati Raman field, huff ‘n’ puff injection was started in the early 1980s. Because of the early breakthrough of CO2 in offset wells in a short period of time, the project was converted to field-scale random-pattern continuous injection. During more than 20 years of injection, the recovery peaked at approximately 13,000 STB/D and began to decline, reaching today's value of approximately 7,000 STB/D. In the case of Bati Raman, in its mature, the injected agent is bypassing the remaining oil and production is curtailed by excessively high gas/oil ratios (GORs). The naturally fractured character of the reservoir rock has been a challenge for establishing successful 3D conformance from the beginning, and its impact is even more pronounced in the later stages of the process. Therefore, the field requires modifications in the reservoir-management scheme to improve the recovery factor and to improve productivity of the current wells.

The Hermes oil field: a small field takes wings

2009 ◽  
Vol 49 (1) ◽  
pp. 221 ◽  
Author(s):  
Greg C Smith ◽  
Jai Louis ◽  
Roy White ◽  
Ritu Gupta ◽  
Roger Collinson
Keyword(s):  
Scenario Analysis ◽  
Flow Line ◽  
Field Potential ◽  
Statistical Design ◽  
High Water ◽  
Oil Field ◽  
Oil Accumulation ◽  
Field Development ◽  
Uncertain Variables ◽  
Water Cut

The Lambert field was discovered in 1973 with oil reservoired in Tithonian turbidites. It was viewed as uneconomic until 1996 when re-evaluation led to discovery of the adjacent Hermes oil accumulation by Lambert–2. The Lambert–3 producer was drilled nearby to Lambert–2 in 1997 and tied back to the Cossack-Pioneer floating production storage offloader (FPSO). Lambert–3 was expected to drain about 25 MMBBLs of oil, coming off plateau after one year and declining substantially thereafter; however, it had produced more than 52 MMBBLs of oil by late 2008 without any water cut and may produce much more in the next 15–20 years. In contrast, several appraisal and production wells drilled since in the adjacent Lambert accumulation have only produced modest recoveries. Why were the original deterministic views of the Lambert-Hermes field so far from present estimates? This paper describes the approach taken to re-assess the Lambert and Hermes oil accumulations. First, the traps were reviewed by framing the main uncertain variables followed by a rigorous scenario analysis of the field. The work was expedited by using a statistical design to substantially reduce the number of scenarios required for modelling and simulation. The results included a statistical analysis and produced a better view of the probable reserves ranges. Remarkably, after 11 years’ production the field potential warranted re-appraisal. The scenario analysis indicated which uncertain variables needed attention and helped to select well locations. The results of appraisal should decide between several re-development options. The main possibilities for new field development include: drilling of additional oil producers; water shut-off in some producers; an additional flow-line to de-bottleneck oil production from Lambert and Hermes; re-instatement of a gas-injection line for gas-lift of wells at high water-cut; and installation of a new manifold further north in the Hermes accumulation to optimise field recovery.

Design for a New Type of Water Cut Meter Based on Fiber Optic Interferometer Used in Oil Well Logging

2013 ◽  
Vol 807-809 ◽  
pp. 2578-2582
Author(s):  
Shi Sheng Guo ◽  
Ying Shang ◽  
Xiao Hui Liu ◽  
Chang Wang ◽  
Wen An Zhao ◽  
...  
Keyword(s):  
Sound Velocity ◽  
Sound Pressure ◽  
Fiber Optic ◽  
Oil Field ◽  
Oil Well ◽  
Field Development ◽  
Pressure Signal ◽  
New Type ◽  
Water Cut ◽  
Fiber Optic Interferometer

With the continual advancement of oil field development, water cut is an extremely important parameter which determines the transmission characteristics of the oil production and provides a scientific basis for oil and gas optimization exploration and increase of reservoir recovery. A new type of water cut meter based on fiber optic interferometer is proposed, sound pressure signal on the pipe is generated when the acoustic wave is propagated in a mixture of the pipe, the fiber optic sensors wrapped closely around the outside wall of pipe is capable of sensing sound pressure signal, the use of phase carrier technology aloud sound velocity is solved out through the method of Phase Generated Carrier (PGC) and sound pressure spectrum, then water cut can be solved according to the relationship between sound velocity and water cut.

A Field Pilot of Waterflooding Conformance Control in Tight Oil Reservoir with Biotechnology

2021 ◽  
Author(s):  
Songyuan Liu ◽  
Xiaochun Jin ◽  
Deji Liu ◽  
Hao Xu ◽  
Lidong Zhang ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Vertical Direction ◽  
Cost Effective ◽  
Injection Rate ◽  
Recovery Factor ◽  
Tight Oil ◽  
Index Test ◽  
Indigenous Bacteria ◽  
Water Cut

Abstract Traditional Microbial Enhanced Oil Recovery (MEOR) technology assumes the oil recovery is increased by the biosurfactant generating by the subsurface bacteria. However, we identified that increased recovery factor is mainly contributed by stimulating the indigenous bacteria to plug the preferred waterflooding channels, which was proved at laboratory and some high-permeable oilfield, but never implemented in the waterflooding of tight oilfield. This paper presents a comprehensive study on Bio-diversion technique by stimulating indigenous bacteria covering lab research and filed operation lasting 18 months. The lab research comprised: (1) feasibility research using modified recipe and field sample on the stimulation of indigenous microorganisms; and (2) Evaluation of effectiveness of the stimulation based on lab results. A field pilot, consisting of 10 injectors, 10 producers, injecting and producing from multi-zones, reservoir temperature is about 160 F, permeabilities range from 30 md to over 100 md, daily water injection rate is about 2,000 BWPD, pre-treatment water cut is over 90%. It is observed that the water cut has decreased from 98% to 80% gradually (3-6 months after injection). Besides, the water injection index test indicates that the injection profile becomes more evenly after 9 months of microbial nutrient injection because the stimulated bacteria reduce the permeability of more permeable zones and reduce the permeability heterogeneity in the vertical direction. Sharing the field results with the industry may inspire the operators to consider one alternative environmentally friendly and cost-effective approach to increase the recovery factor of tight oil reservoirs. From the technical viewpoint, the field pilot proves that the major mechanisms of MEOR is sweeping the unswept oil by injecting the microbial nutrient to the reservoir to stimulate the indigenous bacteria to block the preferred waterflooding channels.

Sign in / Sign up

Export Citation Format

Share Document