scholarly journals ‘Drinking and Dropping’: On Interacting with Plastic Pollution and Waste in South-Eastern Nigeria

Author(s):  
Lesley Henderson ◽  
Emeka W. Dumbili

Abstract Nigeria is reported as having released up to 0.34 million tonnes of plastic debris into the ocean in 2010 and ranked ninth country in the world for pollution of the marine environment. It is a postcolonial, oil-rich country where plastic is cheap and widely available. Currently, there is no government policy regulating single-use plastic products. Previous studies have identified university student residential areas as ‘hot spots’ for plastic waste. We used qualitative methods (focus groups and semi-structured interviews) to explore how students made sense of their single use plastics consumption (including ‘pure water’ plastic sachets) and analysed how young Nigerians interact with plastic waste. Students perceived plastic waste as malodorous, causing harm to human health and blighting environmental aesthetics. Students saw themselves as the cause of plastic pollution (as consumers) whereas plastic industries were framed positively as producers bringing progress and prosperity. Participants were open about their indiscriminate littering practices subverting other study findings where responsibility tends to be deflected (to policy makers, producers). While we are relying on self-reported behaviour, we found no obvious link between awareness of environmental harm caused by plastic pollution and students’ actions. Within this peer group of young Nigerians, it was not considered ‘normal’ or ‘cool’ socially to use waste bins or recycle. We suggest that further research is needed into how plastic pollution is made sense of in terms of individual responsibility; lay understandings of miasmas; perceptions of public/private spaces and plastics as a signifier of modernity and enhanced social status.

2021 ◽  
pp. 0734242X2098082
Author(s):  
Md. Sazzadul Haque ◽  
Shafkat Sharif ◽  
Aseer Masnoon ◽  
Ebne Rashid

The SARS-CoV-2 pandemic has demonstrated both positive and negative effects on the environment. Major concerns over personal hygiene, mandated and ease in lockdown actions and slackening of some policy measures have led to a massive surge in the use of disposable personal protective equipment (PPE) and other single-use plastic items. This generated an enormous amount of plastic waste from both healthcare and household units, and will continue to do so for the foreseeable future. Apart from the healthcare workers, the general public have become accustomed to using PPE. These habits are threatening the land and marine environment with immense loads of plastic waste, due to improper disposal practices across the world, especially in developing nations. Contaminated PPE has already made its way to the oceans which will inevitably produce plastic particles alongside other pathogen-driven diseases. This study provided an estimation-based approach in quantifying the amount of contaminated plastic waste that can be expected daily from the massive usage of PPE (e.g. facemasks) because of the countrywide mandated regulations on PPE usage. The situation of Bangladesh has been analysed and projections revealed that a total of 3.4 billion pieces of single-use facemask, hand sanitizer bottles, hand gloves and disposable polyethylene bags will be produced monthly, which will give rise to 472.30 t of disposable plastic waste per day. The equations provided for the quantification of waste from used single-use plastic and PPE can be used for other countries for rough estimations. Then, the discussed recommendations will help concerned authorities and policy makers to design effective response plans. Sustainable plastic waste management for the current and post-pandemic period can be imagined and acted upon.


2021 ◽  
Author(s):  
Phạm Hà Trang ◽  
Hoang Truong Giang ◽  
Nguyen Cam Duong

Plastic pollution is an urgent global problem that threatens the entire ecosystem, causing climate change and many other consequences that humans have to bear. Therefore, citizens need to uphold their sense of responsibility, consciously change living habits, say no to single-use plastic products. Protecting the environment, limiting plastic waste is protecting ourselves.


Eos ◽  
2020 ◽  
Vol 101 ◽  
Author(s):  
Randy Showstack

With just 8% of plastic waste in the United States currently being recycled, the bill aims to set up an effective plastic recycling program and limit single-use plastic.


Author(s):  
Shen Molloy ◽  
Andrew Medeiros ◽  
Tony Walker ◽  
Sarah Saunders

Government-led legislation is a key strategy to reduce plastic pollution; however, societal perception can heavily influence government intervention for environmental issues. To understand the public acceptability of government action to reduce plastic pollution, we examine the perception of existing and upcoming legislative action on single-use plastics by means of a structured survey with additional semi-structured interviews. Our focus is on the four Atlantic provinces of Canada, which was the first region in Canada to implement provincial-wide legislation for plastic reduction at the consumer level in 2019. Results show strong public support (77 %, n = 838) for bans on single-use plastic bags at the consumer level, and for further plastic pollution reduction legislation. However, the level of support differed between regions and by demographics. Semi-structured interviews show that decision-makers should increase efforts in raising consumer awareness and standardizing regulations across jurisdictions for smoother transitions prior to legislative action.


2021 ◽  
Vol 5 (3) ◽  
pp. 269-278
Author(s):  
Lee Van ◽  
Norhadilah Abdul Hamid ◽  
Md. Fauzi Ahmad ◽  
Ahmad Nur Aizat Ahmad ◽  
Rumaizah Ruslan ◽  
...  

Malaysia had ranked as eighth over the top 20 countries with mismanaged plastic waste. The largest source of this issue was high consumption of single-use plastic by individuals. It is believed that, residents’ social behaviour played a significant role in reducing single-use plastic, which contributed to decreased plastic pollution. Therefore, this study investigates the factors that affect residents’ single-use plastic behavioural intention in Malaysia using the Theory of Planned Behaviour (TPB). A Quantitative study using survey questionnaire was employed and the total samples were 341 residents in Batu Pahat Johor. All of the data were analysed using regression analysis through Statistical Packages for the Social Sciences (SPSS) software. The results show a positive relationship between all variables except for environmental awareness and law and regulation. At the same time, the most influential factor affecting residents’ single-use plastic reducing behavioural intention was the attitude of residents against lower plastic consumption. Future studies were recommended to be conducted in urban areas which could obtain more desired outcomes. Thus, the findings from this research could provide useful and specific information for policy makers to implement effective strategies for protecting the environmental ecosystem in Malaysia. Doi: 10.28991/esj-2021-01275 Full Text: PDF


2021 ◽  
Author(s):  
◽  
Huy Tim

<p><b>Plastic pollution is and continues to be a growing problem in today’s world. The consequences of its abundance and combination of take, make, and waste practices linger within our environment and landfills, resulting in negative social, economic, and environmental impacts. Due to China’s new waste ban, New Zealand (NZ) is no longer able to export plastic waste overseas. With the current inadequate waste management infrastructure and without recycling restrictions on different types of plastics, this waste stream becomes complex and problematic.</b></p> <p>A significant amount of this waste originates from single-use and non-recyclable plastics, which has only increased over time with the emergence of consumer convenience packaging. Thus, in addition to new infrastructure and systems, a cultural shift and greater awareness is needed to address the plastic waste issue.</p> <p>There are existing industry leaders who have successfully closed the loop for recycling certain plastic waste streams in NZ. However, field research has revealed that even within such closed looped systems, some residual non-recyclable waste still remains. This research proposes to add new value to this low value and problematic waste in the form of highly crafted artefacts.</p> <p>This opportunity is explored with a ‘Research through Design’ methodology focusing on 3D printing and digital craft. This includes a practice-based research approach that includes material experimentation and reflective practice to inform the creation of design outputs. The investigation explores the upcycling of bottle caps and sticker labels as difficult and low value waste streams. Outputs include 3D printed artefacts for a variety of applications, including lighting, furniture and craft objects. These design outputs aim to demonstrate how undervalued and neglected materials can be reincarnated in a more durable form, to raise awareness and elicit responses regarding throwaway culture and the global waste problem.</p>


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Shahrah Al Qahtani ◽  
Fatimah Al Wuhayb ◽  
Hacene Manaa ◽  
Adnan Younis ◽  
Shama Sehar

Abstract During the COVID-19 pandemic, many positive shifts have been observed in the ecosystem, with a significant decrease in the greenhouse gas emissions and air pollution. On the other hand, there were unavoidable negative shifts due to a surge in demand for plastic products such as food and groceries’ delivery packaging, single-use plastics, medical and personal protective equipment to prevent transmission of COVID-19. Plastic pollution can be considered as a key environmental issue in world due to the huge footprints of plastics on natural ecosystems and public health. Herein, we presented an overview on the rise of plastic pollution during the COVID-19 pandemic. The potential sources of plastic waste during COVID-19 with its negative effects on the environment such as marine ecosystems and the global economics are highlighted. We also suggested some strategies and recommendations to tackle plastic leakages by applying feedstock recycling, sterilization, and with the use of biodegradable plastics that have become a sustainable alternative to fossil fuel plastics. Also, the importance of elevating public awareness and some recommendations to mitigate plastic generated during the pandemic has been addressed as well.


2022 ◽  
Author(s):  
Phạm Hà Trang ◽  
Hoàng Trường Giang ◽  
Nguyen Cam Duong

Plastic pollution is an urgent global problem that threatens the entire ecosystem, causing climate change and many other consequences that humans have to bear. Therefore, citizens need to uphold their sense of responsibility, consciously change living habits, say no to single-use plastic products. Protecting the environment, limiting plastic waste is protecting ourselves.


2021 ◽  
Author(s):  
◽  
Huy Tim

<p><b>Plastic pollution is and continues to be a growing problem in today’s world. The consequences of its abundance and combination of take, make, and waste practices linger within our environment and landfills, resulting in negative social, economic, and environmental impacts. Due to China’s new waste ban, New Zealand (NZ) is no longer able to export plastic waste overseas. With the current inadequate waste management infrastructure and without recycling restrictions on different types of plastics, this waste stream becomes complex and problematic.</b></p> <p>A significant amount of this waste originates from single-use and non-recyclable plastics, which has only increased over time with the emergence of consumer convenience packaging. Thus, in addition to new infrastructure and systems, a cultural shift and greater awareness is needed to address the plastic waste issue.</p> <p>There are existing industry leaders who have successfully closed the loop for recycling certain plastic waste streams in NZ. However, field research has revealed that even within such closed looped systems, some residual non-recyclable waste still remains. This research proposes to add new value to this low value and problematic waste in the form of highly crafted artefacts.</p> <p>This opportunity is explored with a ‘Research through Design’ methodology focusing on 3D printing and digital craft. This includes a practice-based research approach that includes material experimentation and reflective practice to inform the creation of design outputs. The investigation explores the upcycling of bottle caps and sticker labels as difficult and low value waste streams. Outputs include 3D printed artefacts for a variety of applications, including lighting, furniture and craft objects. These design outputs aim to demonstrate how undervalued and neglected materials can be reincarnated in a more durable form, to raise awareness and elicit responses regarding throwaway culture and the global waste problem.</p>


Sign in / Sign up

Export Citation Format

Share Document