scholarly journals Efficient production of myo-inositol in Escherichia coli through metabolic engineering

2020 ◽  
Author(s):  
Ran You ◽  
Lei Wang ◽  
Congrong Shi ◽  
Hao Chen ◽  
Shasha Zhang ◽  
...  

Abstract Background: The biosynthesis of high value-added compounds using metabolically engineered strains has received wide attention in recent years. Myo-inositol (inositol), an important compound in the pharmaceutics, cosmetics and food industries, is usually produced from phytate via a harsh set of chemical reactions. Recombinant Escherichia coli strains have been constructed by metabolic engineering strategies to produce inositol, but with a low yield. The proper distribution of carbon flux between cell growth and inositol production is a major challenge for constructing an efficient inositol-synthesis pathway in bacteria. Construction of metabolically engineered E. coli strains with high stoichiometric yield of inositol is desirable.Results: In the present study, we designed an inositol-synthesis pathway from glucose with a theoretical stoichiometric yield of 1 mol inositol/mol glucose. Recombinant E. coli strains with high stoichiometric yield (>0.7 mol inositol/mol glucose) were obtained. Inositol was successfully biosynthesized after introducing two crucial enzymes: inositol-3-phosphate synthase (IPS) from Trypanosoma brucei, and inositol monophosphatase (IMP) from E. coli. Based on starting strains E. coli BW25113 (wild-type) and SG104 (ΔptsG::glk, ΔgalR::zglf, ΔpoxB::acs), a series of engineered strains for inositol production was constructed by deleting the key genes pgi, pfkA and pykF. Plasmid-based expression systems for IPS and IMP were optimized, and expression of the gene zwf was regulated to enhance the stoichiometric yield of inositol. The highest stoichiometric yield (0.96 mol inositol/mol glucose) was achieved from recombinant strain R15 (SG104, Δpgi, Δpgm, and RBSL5-zwf). Strain R04 (SG104 and Δpgi) reached high-density in a 1-L fermenter when using glucose and glycerol as a mixed carbon source. In scaled-up fed-batch bioconversion in situ using strain R04, 0.82 mol inositol/mol glucose was produced within 23 h, corresponding to a titer of 106.3 g/L (590.5 mM) inositol.Conclusions: The biosynthesis of inositol from glucose in recombinant E. coli was optimized by metabolic engineering strategies. The metabolically engineered E. coli strains represent a promising method for future inositol production. This study provides an essential reference to obtain a suitable distribution of carbon flux between glycolysis and inositol synthesis.

2020 ◽  
Author(s):  
Ran You ◽  
Lei Wang ◽  
Congrong Shi ◽  
Hao Chen ◽  
Shasha Zhang ◽  
...  

Abstract Background: The biosynthesis of high value-added compounds using metabolically engineered strains has received wide attention in recent years. Myo-inositol (inositol), an important compound in the pharmaceutics, cosmetics and food industries, is usually produced from phytate via a harsh set of chemical reactions. Recombinant Escherichia coli strains have been constructed by metabolic engineering strategies to produce inositol, but with a low yield. The proper distribution of carbon flux between cell growth and inositol production is a major challenge for constructing an efficient inositol-synthesis pathway in bacteria. Construction of metabolically engineered E. coli strains with high stoichiometric yield of inositol is desirable.Results: In the present study, we designed an inositol-synthesis pathway from glucose with a theoretical stoichiometric yield of 1 mol inositol/mol glucose. Recombinant E. coli strains with high stoichiometric yield (>0.7 mol inositol/mol glucose) were obtained. Inositol was successfully biosynthesized after introducing two crucial enzymes: inositol-3-phosphate synthase (IPS) from Trypanosoma brucei, and inositol monophosphatase (IMP) from E. coli. Based on starting strains E. coli BW25113 (wild-type) and SG104 (ΔptsG::glk, ΔgalR::zglf, ΔpoxB::acs), a series of engineered strains for inositol production was constructed by deleting the key genes pgi, pfkA and pykF. Plasmid-based expression systems for IPS and IMP were optimized, and expression of the gene zwf was regulated to enhance the stoichiometric yield of inositol. The highest stoichiometric yield (0.96 mol inositol/mol glucose) was achieved from recombinant strain R15 (SG104, Δpgi, Δpgm, and RBSL5-zwf). Strain R04 (SG104 and Δpgi) reached high-density in a 1-L fermenter when using glucose and glycerol as a mixed carbon source. In scaled-up fed-batch bioconversion in situ using strain R04, 0.82 mol inositol/mol glucose was produced within 23 h, corresponding to a titer of 106.3 g/L (590.5 mM) inositol.Conclusions: The biosynthesis of inositol from glucose in recombinant E. coli was optimized by metabolic engineering strategies. The metabolically engineered E. coli strains represent a promising method for future inositol production. This study provides an essential reference to obtain a suitable distribution of carbon flux between glycolysis and inositol synthesis.


2020 ◽  
Author(s):  
Ran You ◽  
Lei Wang ◽  
Congrong Shi ◽  
Hao Chen ◽  
Shasha Zhang ◽  
...  

Abstract Background The biosynthesis of high value-added compounds through metabolically engineered strains has received widely attention in recent years. As an effective compound in pharmaceutical, cosmetic and food industry, myo-inositol (inositol) is mainly produced via a harsh set of chemical reactions from phytate. The proper distribution of carbon flux between cell growth and inositol production was a major challenge for constructing an efficient inositol-synthetic pathway. Recombinant E. coli strains have been constructed by metabolic engineering strategies to produce inositol, yet with a low yield. Therefore, construction of E. coli metabolically engineered strains with high stoichiometric yield will be attractive. Results In the present study, the recombinant E. coli strains with high stoichiometric yield (> 0.7 mol inositol/mol glucose) were obtained to efficiently synthesize inositol. Inositol was successfully biosynthesized after introducing two crucial enzymes, inositol-3-phosphate synthase (IPS) from Trypanosoma brucei , and inositol monophosphatase (IMP) from E. coli. Based on starting strains E. coli BW25113 (wild type) and SG104 ( ΔptsG::glk , ΔgalR::zglf , ΔpoxB::acs ), a series of engineered strains for inositol production were constructed by deleting the key genes pgi, pfkA or pykF . Furthermore, the plasmid expression systems of IPS and IMP were optimized, and the gene zwf was regulated to enhance stoichiometric yield. The highest stoichiometric yield (0.96 mol inositol/mol glucose) was achieved with the combined strain R15 of SG104, Δpgi , Δpgm , and RBSL5-zwf. Simultaneously, the engineered strain R04 reached high-density fermentation level in a 1-L fermenter by using glucose and glycerol as mixed carbon source. In the scale-up bioconversion in situ with R04, 0.82 mol inositol/mol glucose was produced by fed-batch within 23 h, corresponding to a titer of 106.3 g/L (590.5 mM). Conclusions The biosynthetic pathway of inositol from glucose in recombinant E. coli was optimized by metabolic engineering strategies. The metabolically engineered E. coli strains represent a promising method for future inositol production. This study provided an essential reference to obtain a suitable distribution of carbon flux between glycolysis pathway and product synthetic pathway.


2018 ◽  
Vol 84 (7) ◽  
Author(s):  
Tomokazu Ito ◽  
Maiko Tokoro ◽  
Ran Hori ◽  
Hisashi Hemmi ◽  
Tohru Yoshimura

ABSTRACTOphthalmic acid (OA;l-γ-glutamyl-l-2-aminobutyryl-glycine) is an analog of glutathione (GSH;l-γ-glutamyl-l-cysteinyl-glycine) in which the cysteine moiety is replaced byl-2-aminobutyrate. OA is a useful peptide for the pharmaceutical and/or food industries. Herein, we report a method for the production of OA using engineeredEscherichia colicells.yggS-deficientE. coli, which lacks the highly conserved pyridoxal 5′-phosphate-binding protein YggS and naturally accumulates OA, was selected as the starting strain. To increase the production of OA, we overexpressed the OA biosynthetic enzymes glutamate-cysteine ligase (GshA) and glutathione synthase (GshB), desensitized the product inhibition of GshA, and eliminated the OA catabolic enzyme γ-glutamyltranspeptidase. The production of OA was further enhanced by the deletion ofmiaAandridAwith the aim of increasing the availability of ATP and attenuating the unwanted degradation of amino acids, respectively. The final strain developed in this study successfully produced 277 μmol/liter of OA in 24 h without the formation of by-products in a minimal synthetic medium containing 1 mM each glutamate, 2-aminobutyrate, and glycine.IMPORTANCEOphthalmic acid (OA) is a peptide that has the potential for use in the pharmaceutical and/or food industries. An efficient method for the production of OA would allow us to expand our knowledge about its physiological functions and enable the industrial/pharmaceutical application of this compound. We demonstrated the production of OA usingEscherichia colicells in which OA biosynthetic enzymes and degradation enymes were engineered. We also showed that unique approaches, including the use of a ΔyggSmutant as a starting strain, the establishment of an S495F mutation in GshA, and the deletion ofridAormiaA, facilitated the efficient production of OA inE. coli.


Fermentation ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 216
Author(s):  
Brian Thompson ◽  
Michael Machas ◽  
Omar Abed ◽  
David R. Nielsen

Phenol is an important petrochemical that is conventionally used as a precursor for synthesizing an array of plastics and fine chemicals. As an emerging alternative to its traditional petrochemical production, multiple enzyme pathways have been engineered to date to enable its renewable biosynthesis from biomass feedstocks, each incorporating unique enzyme chemistries and intermediate molecules. Leveraging all three of the unique phenol biosynthesis pathways reported to date, a series of synthetic ‘metabolic funnels’ was engineered, each with the goal of maximizing net precursor assimilation and flux towards phenol via the parallel co-expression of multiple distinct pathways within the same Escherichia coli host. By constructing and evaluating all possible binary and tertiary pathway combinations, one ‘funnel’ was ultimately identified, which supported enhanced phenol production relative to all three individual pathways by 16 to 69%. Further host engineering to increase endogenous precursor availability then allowed for 26% greater phenol production, reaching a final titer of 554 ± 19 mg/L and 28.8 ± 0.34 mg/g yield on glucose. Lastly, using a diphasic culture including dibutyl phthalate for in situ phenol extraction, final titers were further increased to a maximum of 812 ± 145 mg/L at a yield of 40.6 ± 7.2 mg/g. The demonstrated ‘funneling’ pathway holds similar promise in support of phenol production by other, non-E. coli hosts, while this general approach can be readily extended towards a diversity of other value-added bioproducts of interest.


Author(s):  
Jun Qiao ◽  
Xin Tan ◽  
Hongyu Ren ◽  
Zheng Wu ◽  
Xiaoqing Hu ◽  
...  

Escherichia coli contains 12 chaperone-usher operons for biosynthesis and assembly of various fimbriae. In this study, each of the 12 operons was deleted in E. coli MG1655, and the resulting 12 deletion mutants all grew better than the wild type, especially in the nutrient-deficient M9 medium. When the plasmid pBHR68 containing the key genes for polyhydroxyalkanoate production was introduced into these 12 mutants, each mutant synthesized more polyhydroxyalkanoate than the wild type control. These results indicate that the fimbriae removal in E. coli benefits cell growth and polyhydroxyalkanoate production. Therefore, all the 12 chaperone-usher operons including 64 genes were deleted in MG1655, resulting the fimbriae absent strain WQM026. WQM026 grew better than MG1655, and no fimbriae structures were observed on the surface of WQM026 cells. Transcriptomic analysis showed that in WQM026 cells the genes related to glucose consumption, glycolysis, flagellar synthesis, and biosynthetic pathways of some key amino acids were up-regulated, while the TCA cycle related genes were down-regulated. When pBHR68 was introduced into WQM026, huge amounts of poly-3-hydroxybutyrate were produced; when the plasmid pFW01-thrA*BC-rhtC containing the key genes for L-threonine biosynthesis and transport was transferred into WQM026, more L-threonine was synthesized than the control. These results suggest that this fimbriae absent E. coli WQM026 is a good host for efficient production of polyhydroxyalkanoate and L-threonine, and has the potential to be developed into a valuable chassis microorganism. IMPORTANCE In this study, we investigated the interaction between the biosynthesis and assembly of fimbriae and intracellular metabolic network in E. coli. We found that eliminating fimbriae could effectively improve the production of polyhydroxyalkanoate and L-threonine in E. coli MG1655. These results contribute to understanding the necessity of fimbriae and the advantages of fimbriae removal for industrial microorganisms. The knowledge gathered from this study may be applied to the development of superior chassis microorganisms.


2003 ◽  
Vol 71 (6) ◽  
pp. 3088-3096 ◽  
Author(s):  
Peter Redford ◽  
Paula L. Roesch ◽  
Rodney A. Welch

ABSTRACT Extraintestinal Escherichia coli strains cause meningitis, sepsis, urinary tract infection, and other infections outside the bowel. We examined here extraintestinal E. coli strain CFT073 by differential fluorescence induction. Pools of CFT073 clones carrying a CFT073 genomic fragment library in a promoterless gfp vector were inoculated intraperitoneally into mice; bacteria were recovered by lavage 6 h later and then subjected to fluorescence-activated cell sorting. Eleven promoters were found to be active in the mouse but not in Luria-Bertani (LB) broth culture. Three are linked to genes for enterobactin, aerobactin, and yersiniabactin. Three others are linked to the metabolic genes metA, gltB, and sucA, and another was linked to iha, a possible adhesin. Three lie before open reading frames of unknown function. One promoter is associated with degS, an inner membrane protease. Mutants of the in vivo-induced loci were tested in competition with the wild type in mouse peritonitis. Of the mutants tested, only CFT073 degS was found to be attenuated in peritoneal and in urinary tract infection, with virulence restored by complementation. CFT073 degS shows growth similar to that of the wild type at 37°C but is impaired at 43°C or in 3% ethanol LB broth at 37°C. Compared to the wild type, the mutant shows similar serum survival, motility, hemolysis, erythrocyte agglutination, and tolerance to oxidative stress. It also has the same lipopolysaccharide appearance on a silver-stained gel. The basis for the virulence attenuation is unclear, but because DegS is needed for σE activity, our findings implicate σE and its regulon in E. coli extraintestinal pathogenesis.


2005 ◽  
Vol 71 (7) ◽  
pp. 3468-3474 ◽  
Author(s):  
Gyeong Tae Eom ◽  
Jae Kwang Song ◽  
Jung Hoon Ahn ◽  
Yeon Soo Seo ◽  
Joon Shick Rhee

ABSTRACT The ABC transporter (TliDEF) from Pseudomonas fluorescens SIK W1, which mediated the secretion of a thermostable lipase (TliA) into the extracellular space in Escherichia coli, was engineered using directed evolution (error-prone PCR) to improve its secretion efficiency. TliD mutants with increased secretion efficiency were identified by coexpressing the mutated tliD library with the wild-type tliA lipase in E. coli and by screening the library with a tributyrin-emulsified indicator plate assay and a microtiter plate-based assay. Four selected mutants from one round of error-prone PCR mutagenesis, T6, T8, T24, and T35, showed 3.2-, 2.6-, 2.9-, and 3.0-fold increases in the level of secretion of TliA lipase, respectively, but had almost the same level of expression of TliD in the membrane as the strain with the wild-type TliDEF transporter. These results indicated that the improved secretion of TliA lipase was mediated by the transporter mutations. Each mutant had a single amino acid change in the predicted cytoplasmic regions in the membrane domain of TliD, implying that the corresponding region of TliD was important for the improved and successful secretion of the target protein. We therefore concluded that the efficiency of secretion of a heterologous protein in E. coli can be enhanced by in vitro engineering of the ABC transporter.


2001 ◽  
Vol 183 (17) ◽  
pp. 5187-5197 ◽  
Author(s):  
Vanessa Sperandio ◽  
Alfredo G. Torres ◽  
Jorge A. Girón ◽  
James B. Kaper

ABSTRACT Enterohemorrhagic Escherichia coli (EHEC) O157:H7 is responsible for outbreaks of bloody diarrhea and hemolytic-uremic syndrome in many countries. EHEC virulence mechanisms include the production of Shiga toxins (Stx) and formation of attaching and effacing (AE) lesions on intestinal epithelial cells. We recently reported that genes involved in the formation of the AE lesion were regulated by quorum sensing through autoinducer-2, which is synthesized by the product of the luxS gene. In this study we hybridized an E. coli gene array with cDNA synthesized from RNA that was extracted from EHEC strain 86-24 and its isogenicluxS mutant. We observed that 404 genes were regulated by luxS at least fivefold, which comprises approximately 10% of the array genes; 235 of these genes were up-regulated and 169 were down-regulated in the wild-type strain compared to in theluxS mutant. Down-regulated genes included several involved in cell division, as well as ribosomal and tRNA genes. Consistent with this pattern of gene expression, theluxS mutant grows faster than the wild-type strain (generation times of 37.5 and 60 min, respectively, in Dulbecco modified Eagle medium). Up-regulated genes included several involved in the expression and assembly of flagella, motility, and chemotaxis. Using operon::lacZ fusions to class I, II, and III flagellar genes, we were able to confirm this transcriptional regulation. We also observed fewer flagella by Western blotting and electron microscopy and decreased motility halos in semisolid agar in the luxS mutant. The average swimming speeds for the wild-type strain and the luxS mutant are 12.5 and 6.6 μm/s, respectively. We also observed an increase in the production of Stx due to quorum sensing. Genes encoding Stx, which are transcribed along with λ-like phage genes, are induced by an SOS response, and genes involved in the SOS response were also regulated by quorum sensing. These results indicate that quorum sensing is a global regulatory mechanism for basic physiological functions of E. coli as well as for virulence factors.


2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Zhenning Liu ◽  
Xue Zhang ◽  
Dengwei Lei ◽  
Bin Qiao ◽  
Guang-Rong Zhao

Abstract Background 3-Phenylpropanol with a pleasant odor is widely used in foods, beverages and cosmetics as a fragrance ingredient. It also acts as the precursor and reactant in pharmaceutical and chemical industries. Currently, petroleum-based manufacturing processes of 3-phenypropanol is environmentally unfriendly and unsustainable. In this study, we aim to engineer Escherichia coli as microbial cell factory for de novo production of 3-phenypropanol via retrobiosynthesis approach. Results Aided by in silico retrobiosynthesis analysis, we designed a novel 3-phenylpropanol biosynthetic pathway extending from l-phenylalanine and comprising the phenylalanine ammonia lyase (PAL), enoate reductase (ER), aryl carboxylic acid reductase (CAR) and phosphopantetheinyl transferase (PPTase). We screened the enzymes from plants and microorganisms and reconstructed the artificial pathway for conversion of 3-phenylpropanol from l-phenylalanine. Then we conducted chromosome engineering to increase the supply of precursor l-phenylalanine and combined the upstream l-phenylalanine pathway and downstream 3-phenylpropanol pathway. Finally, we regulated the metabolic pathway strength and optimized fermentation conditions. As a consequence, metabolically engineered E. coli strain produced 847.97 mg/L of 3-phenypropanol at 24 h using glucose-glycerol mixture as co-carbon source. Conclusions We successfully developed an artificial 3-phenylpropanol pathway based on retrobiosynthesis approach, and highest titer of 3-phenylpropanol was achieved in E. coli via systems metabolic engineering strategies including enzyme sources variety, chromosome engineering, metabolic strength balancing and fermentation optimization. This work provides an engineered strain with industrial potential for production of 3-phenylpropanol, and the strategies applied here could be practical for bioengineers to design and reconstruct the microbial cell factory for high valuable chemicals.


1982 ◽  
Vol 152 (1) ◽  
pp. 534-537
Author(s):  
S Mitra ◽  
B C Pal ◽  
R S Foote

O(6)-Methylguanine-DNA methyltransferase is induced in Escherichia coli during growth in low levels of N-methyl-N'-nitro-N-nitrosoguanidine. We have developed a sensitive assay for quantitating low levels of this activity with a synthetic DNA substrate containing 3H-labeled O(6)-methylguanine as the only modified base. Although both wild-type and adaptation-deficient (ada) mutants of E. coli contained low but comparable numbers (from 13 to 60) of the enzyme molecules per cell, adaptation treatment caused a significant increase of the enzyme in the wild type but not in the ada mutants, suggesting that the ada mutation is in a regulatory locus and not in the structural gene for the methyltransferase.


Sign in / Sign up

Export Citation Format

Share Document