scholarly journals Evaluation of Different Tools of Precision Finishing for Cold Extruded Sun Gear With Internal-External Tooth Shapes

2021 ◽  
Author(s):  
Zuofa Liu ◽  
Xi Wang ◽  
Wenjie Feng ◽  
Jie Zhou ◽  
Zhiyuan Qu ◽  
...  
Keyword(s):  
Finite Element ◽  
Metal Flow ◽  
Commercial Production ◽  
Cold Extrusion ◽  
Forming Load ◽  
Tool Stress ◽  
Distribution Laws ◽  
Profile Accuracy ◽  
Precision Finishing ◽  
Prediction Strategy

Abstract Due to the complex metal flow in the cold extrusion of sun gear, the teeth accuracy of formed sun gear is poor. In order to improve the accuracy of the extruded sun gear, a novel precision finishing method with different tools was proposed in this study. Finite element simulations were performed using DEFORM, and a new finite element (FE) prediction strategy was developed to obtain an in-depth understanding of the deviation distribution laws of the finished sun gear. Then, the influences of different finishing tools on tooth deformation, tool stress, forming load and tooth accuracy were examined. The investigation results show that the profile accuracy of external gear can be improved from ninth to seventh class, lead accuracy can be enhanced from tenth to eighth class, and total M value deviation of internal spline is reduced to 72.3 μm by the precision finishing method with interference mandrel. Therefore, the interference mandrel is recommended as the optimal reshaping tool for commercial production of sun gears. The simulation results are well agreed with the experimental results, which verifies the feasibility of the precision finishing method and the reliability of the FE prediction strategy.

scholarly journals Design of Precision Finishing Method for Cold Extruded Sun Gear With Internal External Tooth Shapes

2021 ◽  
Author(s):  
Zuofa Liu ◽  
Qiuyun Wang ◽  
Jie Zhou ◽  
Wenjie Feng ◽  
Qiang Liang
Keyword(s):  
Material Flow ◽  
Fe Simulation ◽  
Metal Flow ◽  
Cold Extrusion ◽  
Tooth Width ◽  
Distribution Laws ◽  
Profile Accuracy ◽  
Precision Finishing ◽  
Finite Element Prediction ◽  
Prediction Strategy

Abstract Due to the complex metal flow in the cold extrusion of sun gear, the teeth accuracy of formed sun gear is poor. In order to improve the accuracy of the extruded sun gear, a novel precision f inishing method was proposed in this study. A new finite element ( prediction strategy was developed to obtain an in-depth understanding of the deviation distribution laws of the finished sun gear. Then, the forming laws of internal-external gears such as material flow, tooth deformation, forming load and tooth accuracy were analyzed using FE simulation and verified experiment. The investigation results show that the single deviations in profile and helix both first diminished remar ka bly , and then rose gradually while the single M value deviation decreased remarkably with increasing the tooth width The simulation results of teeth deviations are well agreed with the experimental ones, which verifies the reliability of the FE prediction strategy Moreover, the profile accuracy of external gear can be improved from ninth to seventh class, lead accuracy can be enhanced from tenth to eighth class, and total M value deviation of internal spline is reduced to 72.3 μm which proves the feasibility and effectiveness of t he precision finishing method

Analysis on Temperature Field of Work-Piece during Cross Wedge Rolling

2011 ◽  
Vol 230-232 ◽  
pp. 352-356
Author(s):  
Wen Ke Liu ◽  
Kang Sheng Zhang ◽  
Zheng Huan Hu
Keyword(s):  
Finite Element ◽  
Temperature Field ◽  
Metal Flow ◽  
Work Piece ◽  
Contact Deformation ◽  
Cross Wedge Rolling ◽  
Forming Process ◽  
Rigid Plastic ◽  
Finite Element Software ◽  
Deform 3D

Based on the rigid-plastic deformation finite element method and the heat transfer theories, the forming process of cross wedge rolling was simulated with the finite element software DEFORM-3D. The temperature field of the rolled piece during the forming process was analyzed. The results show that the temperature gradient in the outer of the work-piece is sometimes very large and temperature near the contact deformation zone is the lowest while temperature near the center of the rolled-piece keeps relatively stable and even rises slightly. Research results provide a basis for further study on metal flow and accurate shaping of work-piece during cross wedge rolling.

An Analysis on the Forming Load of AA 2024 Aluminium Alloy in Combined and Sequence Operation Process

2006 ◽  
Vol 519-521 ◽  
pp. 949-954 ◽  
Author(s):  
Beong Bok Hwang ◽  
J.H. Shim ◽  
Jung Min Seo ◽  
H.S. Koo ◽  
J.H. Ok ◽  
...  
Keyword(s):  
Finite Element ◽  
Load Capacity ◽  
Low Cost ◽  
Forming Load ◽  
Mechanical Press ◽  
Combined Operation ◽  
Aa 2024 ◽  
Load Characteristics ◽  
Simulation Results ◽  
Selection Of

This paper is concerned with the analysis of the forming load characteristics of a forward-backward can extrusion in both combined and sequence operation. A commercially available finite element program, which is coded in the rigid-plastic finite element method, has been employed to investigate the forming load characteristics. AA 2024 aluminum alloy is selected as a model material. The analysis in the present study is extended to the selection of press frame capacity for producing efficiently final product at low cost. The possible extrusion processes to shape a forward-backward can component with different outer diameters are categorized to estimate quantitatively the force requirement for forming forward-backward can part, forming energy, and maximum pressure exerted on the die-material interfaces, respectively. The categorized processes are composed of combined and/or some basic extrusion processes such as sequence operation. Based on the simulation results about forming load characteristics, the frame capacity of a mechanical press of crank-drive type suitable for a selected process could be determined along with securing the load capacity and with considering productivity. In addition, it is suggested that different load capacities be selected for different dimensions of a part such as wall thickness in forward direction and etc. It is concluded quantitatively from the simulation results that the combined operation is superior to sequence operation in terms of relatively low forming load and thus it leads to low cost for forming equipments. However, it is also known from the simulation results that the precise control of dimensional accuracy is not so easy in combined operation. The results in this paper could be a good reference for analysis of forming process for complex parts and selection of proper frame capacity of a mechanical press to achieve low production cost and thus high productivity.

Effect of Ramp Angle on the Anti-Loosening Ability of Wedge Self-Locking Nuts Under Vibration

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Jianhua Liu ◽  
Hao Gong ◽  
Xiaoyu Ding
Keyword(s):  
Finite Element ◽  
Numerical Simulations ◽  
Production Technology ◽  
Material Properties ◽  
Threshold Value ◽  
Commercial Production ◽  
Experimental Results ◽  
Fe Method ◽  
Transversal Vibration

Recently, the wedge self-locking nut, a special anti-loosening product, is receiving more attention because of its excellent reliability in preventing loosening failure under vibration conditions. The key characteristic of a wedge self-locking nut is the special wedge ramp at the root of the thread. In this work, the effect of ramp angle on the anti-loosening ability of wedge self-locking nuts was studied systematically based on numerical simulations and experiments. Wedge self-locking nuts with nine ramp angles (10 deg, 15 deg, 20 deg, 25 deg, 30 deg, 35 deg, 40 deg, 45 deg, and 50 deg) were modeled using a finite element (FE) method, and manufactured using commercial production technology. Their anti-loosening abilities under transversal vibration conditions were analyzed based on numerical and experimental results. It was found that there is a threshold value of the initial preload below which the wedge self-locking nuts would lose their anti-loosening ability. This threshold value of initial preload was then proposed for use as a criterion to evaluate the anti-loosening ability of wedge self-locking nuts quantitatively and to determine the optimal ramp angle. Based on this criterion, it was demonstrated, numerically and experimentally, that a 30 deg wedge ramp resulted in the best anti-loosening ability among nine ramp angles studied. The significance of this study is that it provides an effective method to evaluate the anti-loosening ability of wedge self-locking nuts quantitatively, and determined the optimal ramp angle in terms of anti-loosening ability. The proposed method can also be used to optimize other parameters, such as the material properties and other dimensions, to guarantee the best anti-loosening ability of wedge self-locking nuts.

Stress and Strain Distribution in the Upsetting Process

2021 ◽  
pp. 288-301
Author(s):  
Japheth Obiko ◽  
Fredrick Madaraka Mwema
Keyword(s):  
Finite Element ◽  
Strain Distribution ◽  
Metal Flow ◽  
Stress Strain ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Contact Surfaces ◽  
Stress Behaviour ◽  
Stress And Strain Distribution ◽  
Forging Load

Numerical simulation of metal flow behaviour was studied using DeformTM3D software. The simulation process was done on X20 steel taken from the software database at 1073-1273K temperature, 10mm/s die speed, and 67% height reduction. From the simulation results, forging load, damage, and stress/strain distributions were obtained. The results show that the forging load increased with a decrease in temperature or decreased with an increase in temperature. The maximum damage values increased as the temperature increased. The obtained maximum damage values were 0.42 (1073K), 0.43 (1173K), and 0.45 (1273K). The damage distribution was inhomogeneous in the deformed cylinder. The stress/strain distributions were inhomogeneous in the deformed cylinder. The location of the maximum strain was at the centre of the deformed cylinder while the maximum stress occurred at the die-cylinder contact surfaces. The study showed that flow stress behaviour can be predicted using finite element method. This shows the feasibility of applying the finite element analysis to analyse the forging process.

Study on Cylindrical Heatsink Forging Process Considering Friction Condition

2019 ◽  
Vol 823 ◽  
pp. 141-144
Author(s):  
Tung Sheng Yang ◽  
Yong Nan Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Friction Factor ◽  
Testing Machine ◽  
Metal Flow ◽  
Compression Tests ◽  
Stress Strain ◽  
Element Analysis ◽  
Forging Process ◽  
Different Temperatures

The feasibility of forging of AL-1050 alloy of cylindrical heatsink under warm conditions is demonstrated in the present work. The stress-strain curves and friction factor play an important role in the cylindrical heatsink forging. The purpose of forging lubrication is to reduce friction between blank and die, and to decrease resistance of metal flow to die. The stress-strain curves at different temperatures are obtained by compressing tests. The friction factor between 1050 aluminum alloy and die material are determined at different temperatures by ring compression tests with graphite lubricants. The compressing and ring compressing tests are carried out by using the computerized screw universal testing machine. The finite element method is used to investigate the forming characters of the forging process. To verify the prediction of FEM simulation in the cylindrical heatsink forging process, the experimental parameters such as stress-strain curves and fiction factor, are as the input data during analysis. Maximum forging load and effective stress distribution are determined of the heatsink forging, using the finite element analysis. Finally, the cylindrical heatsink parts are formed by the forging machine under the conditions using finite element analysis.

scholarly journals Numerical and Experimental Study on the Thermodynamic Coupling of Ti-6Al-4V Blade Preforms by Cross Wedge Rolling

Metals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 1054 ◽  
Author(s):  
Hongchao Ji ◽  
Jianwei Dong ◽  
Long Xin ◽  
Xiaomin Huang ◽  
Jinping Liu
Keyword(s):  
Titanium Alloy ◽  
Metal Flow ◽  
High Strength ◽  
High Heat ◽  
Cross Wedge Rolling ◽  
Forming Process ◽  
Finite Element Software ◽  
Distribution Laws ◽  
Aero Engines ◽  
Thermodynamic Coupling

Titanium alloy possesses high strength, good corrosion resistance, and high heat resistance; thus, it is widely used in the aerospace and other fields. Blades of titanium alloy are important components of aero-engines and are essential to the engines operation. In this work, a Ti-6Al-4V blade was formed by cross wedge rolling (CWR) to realize the near net-shape of an aero-engine blade. First, thermal simulation experiments of Ti-6Al-4V were carried out to obtain the thermal deformation constitutive equation of the alloy. The finite element software Deform-3D was then used to simulate the thermodynamic coupling of the forming process, and the metal flow, temperature, and stress–strain distribution laws during the forming process were analyzed. Finally, experimental verification of the Ti-6Al-4V blade was carried out by using an H500 CWR mill. The results revealed the feasibility of applying CWR to preform Ti-6Al-4V blades.

Sign in / Sign up

Export Citation Format

Share Document